General Flue Maintenance, LOG Replacement

MAINTENANCE

GENERAL FLUE MAINTENANCE

Conduct an inspection of the ﬂ ue system at least annually. Recom- mended areas to inspect are:

1)Check areas of the Flueing System which are exposed to the ele- ments for corrosion. These will appear as rust spots or streaks, and in extreme cases, holes. These components should be replaced immediately.

2)Remove the Cap, and shine a ﬂ ashlight down the Flue. Remove any birds nests, or other foreign material.

3)Check for evidence of excessive condensation, such as water droplets forming in the liner, and subsequently dripping out the joints, Continuous condensation can cause corrosion of caps, pipe, and ﬁ ttings. It may be caused by having excessive lateral runs, too many elbows, or exterior portions of the system being exposed to cold weather.

4)Inspect joints, to verify that no pipe sections or ﬁ ttings have been disturbed, and consequently loosened. Also check mechanical supports such as Wall Straps for rigidity.

LOG REPLACEMENT

The unit should never be used with broken logs. Turn off the gas valve and allow the unit to cool before opening door to carefully remove the logs. The pilot light generates enough heat to burn someone. If for any reason a log should need replacement, use only Regency® replacement logs. The position of these logs must be as shown in the diagram under Log Installation.

NOTE: Improper positioning of logs may create carbon build-up and will alter the unit’s performance which is not covered under warranty.

5)Remove the screws in the glass retainer clips and remove the glass retainer rod. Remove any remaining pieces of glass and ensure that the door is free of debris. Use caution when removing broken glass to avoid injury.

6)Install the door screen (Australia only).

7)Install the replacement glass. When placing the replacement glass in the door, make sure that the glass gasketing will properly seal your unit.

8)Put glass in place and then position glass retainer rod.

Note: Do not use substitute materials. If your glass does break, do not continue to use your unit until it has been replaced.

9)Position the glass retainer clips and door securing bracket. Secure the glass retaining screws but do not overtighten as this may cause the glass to break after the unit heats up.

10)Tighten all screws evenly. Do not overtighten as this may cause breakage.

11)Slip door over hinge pins and put hinge caps back onto door. Latch door securely using the handle and secure the security bracket with the screw.

GOLD-PLATED DOORS

The 24 carat gold plated ﬁ nish on the door requires little maintenance, and need only be cleaned with a damp cloth. DO NOT use abrasive materials or chemical cleaners, as they may harm the ﬁnish and void the warranty. Clean any ﬁngerprints off before turning the unit on.

GLASS REPLACEMENT

Your F33-3 stove is supplied with high temperature, 5 mm Neoceram silica coated ceramic glass that will withstand the highest heat that your unit will produce. In the event that you break your glass by impact, purchase your replacement glass from an authorized Regency® dealer only, and follow our step-by-step instructions for replacement.

1)Allow the stove to cool before removing or replacing glass.

2)To remove the door from the stove remove the securing screw lo- cated between the ashlip and the door, then unfasten the latch.

3)Remove gold hinge caps from door.

4)Lift door off hinge and lay door on a soft, ﬂ at surface.

NOTE: Door Screen only in Australia.

16	Regency® F33-3 Freestanding Gas Stove

F33 specifications

Regency Wraps F33 is a revolutionary product that stands out in the world of culinary tools, specifically designed for home cooks and professional chefs alike. This versatile kitchen accessory serves multiple purposes and embodies the perfect blend of practicality and innovation.

One of the standout features of the Regency Wraps F33 is its outstanding durability. Constructed from high-quality materials, it can withstand the rigors of daily use without compromising its functionality. The wrap is designed to be tear-resistant, ensuring that users can rely on it for a variety of tasks, whether they are wrapping food items, covering dishes, or creating airtight seals.

The F33 is also user-friendly, with a design that makes it easy to handle and manipulate. Its lightweight nature allows for effortless wrapping, making meal prep a breeze. The wrap comes in a generous size, providing ample coverage for even the largest food items. This feature is particularly beneficial for those who love to meal prep or store leftovers, as it eliminates the need for multiple smaller wraps.

In addition to its physical attributes, the Regency Wraps F33 incorporates advanced technologies that enhance its performance. The wrap is designed with a unique non-stick surface, which prevents food from sticking to it, allowing for easy release and clean-up. This innovative technology not only saves time but also ensures that food items maintain their presentation and integrity.

One of the key characteristics of the F33 is its food-safe composition. It is made from materials that are free from harmful chemicals, making it safe for direct contact with food. This is an essential aspect for health-conscious consumers, as it assures them that their food will not be contaminated by toxins or harmful substances.

Moreover, the Regency Wraps F33 is environmentally friendly, which is a growing concern in today’s society. Its recyclable materials contribute to reducing waste, making it a responsible choice for environmentally aware consumers.

In summary, the Regency Wraps F33 combines durability, user-friendliness, advanced technology, food safety, and environmental consciousness into one exceptional product. It is a must-have in any kitchen, whether you are an enthusiastic home cook or a seasoned chef looking to enhance your culinary experience. With its innovative features and reliable performance, the F33 is set to become an indispensable kitchen companion for anyone who values quality and efficiency in food preparation and storage.