Regency Wraps F33 Normal Operating Sounds GAS Appliances, Maintenance Instructions

Page 15

MAINTENANCE

NORMAL OPERATING SOUNDS OF

GAS APPLIANCES

It is possible that you will hear some sounds from your gas appliance. This is perfectly normal due to the fact that there are various gauges and types of steel used within your appliance. Listed below are some examples. All are normal operating sounds and should not be con- sidered as defects in your appliance.

Blower:

Regency® gas appliances use high tech blowers to push heated air farther into the room. It is not unusual for the fan to make a "whirring" sound when ON. This sound will increase or decrease in volume depending on the setting of your fan switch.

Burner Tray:

The burner tray is positioned directly under the burner tube(s) and logs and is made of a different gauge material from the rest of the firebox and body. Therefore, the varying thicknesses of steel will expand and contract at slightly different rates which can cause "ticking" and "crack- ing" sounds. You should also be aware that as there are temperature changes within the unit these sounds will likely re-occur. Again, this is normal for steel fi reboxes.

Blower Thermodisc:

When this thermally activated switch turns ON it will create a small "clicking" sound. This is the switch contacts closing and is normal.

Pilot Flame:

While the pilot fl ame is on it can make a very slight "whisper" sound.

Gas Control Valve:

As the gas control valve turns ON and OFF, a dull clicking sound may be audible, this is normal operation of a gas regulator or valve.

Unit Body/Firebox:

Different types and thicknesses of steel will expand and contract at different rates resulting in some "cracking" and "ticking" sounds will be heard throughout the cycling process.

5)Theapplianceandflueingsystemmustbeinspectedbeforeuse,and at least annually, by an authorised fi eld service person, to ensure that the fl ow of combustion and ventilation air is not obstructed.

During the annual service call, the burners should be removed from the burner tray and cleaned. Replace the embers and rock wool.

6)Each time the appliance is lit, it may cause condensation and fog the glass. This condensation is normal and will disappear in a few minutes as the glass heats up.

7)Caution: Label all wires prior to disconnection when servicing con- trols. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing.

WARNING:

CHILDREN AND ADULTS SHOULD BE ALERTED TO THE HAZARDS OF HIGH SURFACE TEMPERATURES AND SHOULD STAY AWAY TO AVOID BURNS OR CLOTHING IGNITION. YOUNG CHILDREN SHOULD BE CAREFULLY SUPERVISED WHEN THEY ARE IN THE SAME ROOM AS THE APPLIANCE.

CAUTION:

ANY SAFETY SCREEN OR GUARD REMOVED FOR SERVICING AN APPLIANCE MUST BE REPLACED PRIOR TO OPERATING THE APPLIANCE. DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IN OPERATION.

CLOTHINGOROTHERFLAMMABLEMATERIALSHOULD NOT BE PLACED ON OR NEAR THE APPLIANCE.

NEVER OPERATE THE APPLIANCE WITHOUT THE GLASS PROPERLY SECURED IN PLACE.

MAINTENANCE INSTRUCTIONS

1)Always turn off the gas valve before cleaning. For relighting, refer to lighting instructions. Keep the burner and control compartment clean by brushing and vacuuming at least once a year.

When cleaning the logs, use a soft clean brush as the logs are fragile and easily damaged.

2)Clean appliance and door with a damp cloth (never when unit is hot). Never use an abrasive cleaner. The glass should be cleaned with a gas fi replace glass cleaner (when it starts to cloud up).

3)The heater is fi nished in a heat resistant paint and should only be refi nished with heat resistant paint. Regency® uses Stove Brite Paint - Metallic Black #6309.

4)Make a periodic check of burner for proper position and condition. Visually check the fl ame of the burner periodically, making sure the fl ames are steady; not lifting or fl oating. If there is a problem, call an authorised service person.

Regency® F33-3 Freestanding Gas Stove

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Please Keep These Instructions For Future Reference ManualTo the New Owner Table of Contents Data Badge Before YOU Start InstallationGeneral Safety Information Installation ChecklistMinimum ceiling height is 914 mm from top Unit Pedestal AssemblyF33-3 Reference Dimensions Clearances to CombustiblesPedestal & Leg/Bottom Shield Wiring Instructions LEG and Bottom Shield AssemblyWiring Draft HoodFlueing Valve Description GAS Pipe Pressure TestingGAS Connection System DataTest for Flue Spillage LOG and Ember InstallationDoor Handle Safety LatchFinal Check Optional Remote Wall SwitchOptional Remote Control Installation Optional Wall Thermostat InstallationShutdown Procedure Operating InstructionsOperating Instructions Copy of the Lighting Plate Instructions For Your Safety Read Before LightingMaintenance Maintenance InstructionsNormal Operating Sounds GAS Appliances GOLD-PLATED Doors General Flue MaintenanceLOG Replacement Glass ReplacementRemoving Valve Assembly Aeration AdjustmentPilot Adjustment THERMOPILE/THERMOCOUPLE ReplacementTo remove valve from valve assembly, continue Installing Valve AssemblyWiring Diagram Diagram 2 Ground Lug FAN ReplacementTroubleshooting the GAS Control System Troubleshooting GuideParts List Main AssemblyDescription Burner & LOG Assembly Pedestal & LEG Assembly Regency F33-3 Freestanding Gas Stove Regency F33-3 Freestanding Gas Stove Regency F33-3 Freestanding Gas Stove Warranty

F33 specifications

Regency Wraps F33 is a revolutionary product that stands out in the world of culinary tools, specifically designed for home cooks and professional chefs alike. This versatile kitchen accessory serves multiple purposes and embodies the perfect blend of practicality and innovation.

One of the standout features of the Regency Wraps F33 is its outstanding durability. Constructed from high-quality materials, it can withstand the rigors of daily use without compromising its functionality. The wrap is designed to be tear-resistant, ensuring that users can rely on it for a variety of tasks, whether they are wrapping food items, covering dishes, or creating airtight seals.

The F33 is also user-friendly, with a design that makes it easy to handle and manipulate. Its lightweight nature allows for effortless wrapping, making meal prep a breeze. The wrap comes in a generous size, providing ample coverage for even the largest food items. This feature is particularly beneficial for those who love to meal prep or store leftovers, as it eliminates the need for multiple smaller wraps.

In addition to its physical attributes, the Regency Wraps F33 incorporates advanced technologies that enhance its performance. The wrap is designed with a unique non-stick surface, which prevents food from sticking to it, allowing for easy release and clean-up. This innovative technology not only saves time but also ensures that food items maintain their presentation and integrity.

One of the key characteristics of the F33 is its food-safe composition. It is made from materials that are free from harmful chemicals, making it safe for direct contact with food. This is an essential aspect for health-conscious consumers, as it assures them that their food will not be contaminated by toxins or harmful substances.

Moreover, the Regency Wraps F33 is environmentally friendly, which is a growing concern in today’s society. Its recyclable materials contribute to reducing waste, making it a responsible choice for environmentally aware consumers.

In summary, the Regency Wraps F33 combines durability, user-friendliness, advanced technology, food safety, and environmental consciousness into one exceptional product. It is a must-have in any kitchen, whether you are an enthusiastic home cook or a seasoned chef looking to enhance your culinary experience. With its innovative features and reliable performance, the F33 is set to become an indispensable kitchen companion for anyone who values quality and efficiency in food preparation and storage.
Top Page Image Contents