Lenco Marine CS-1004 owner manual Loudness, Display

Page 10

OPERATION

c)RETUNE L, RETUNE S mode The initial time of automatic TA search or PI search mode is selected. When PI information is not caught for retune time, the radio start to retune to next same PI station. When same PI station does not catch 1 cyclic search, the radio goes to last station and waits for several minutes until PI code is received.

-RETUNE L mode: Selected as 90 seconds.

-RETUNE S mode: Selected as 30 seconds.

d)MASK DPI or MASK ALL mode The AF frequency (which has different PI or NO R.D.S. signal with high field strength) is masked during checking PI when the unit searches AF. The unit doesn’t search this AF (DIP) for few minutes. In the case of the AF of NO R.D.S. signal with high field strength, if the real AF is wrongly masked as DIP by some interference, the unit hesitates to search real Afs. For this reason, the unit has the user option (MASK DPI) which doesn’t mask the AF of NO R.D.S. signal with high field strength. In MASK DPI mode, the wrong sound or long mute (according to PI SOUND or PI MUTE) can be heard from the AF station which has NO R.D.S. signal and of which the field strength is higher than that of the currently tuning AF (station).

But, these phenomenon are rare and the user will hardly hear the wrong sound in whole Europe.

-MASK DPI mode:

Masked only the AF which has different PI.

-MASK ALL mode: Masked the AF which has different PI and NO R.D.S. signal with high field strength.

e)BEEP 2’ND, BEEP ALL, BEEP OFF mode

The situation of beep sound is selected. The 3 mode is selected as also pressng AUDIO SELECT button (11) or AUDIO SELECT button (12).

-BEEP 2’nd mode:

The beep is only generated when all allowed double key is pressed long (1 sec).

e.g.

When preset button (14) is pressed.

When BND/LOU button (13) is pressed.

When AMS button (18) is pressed.

-BEEP ALL mode:

The beep is generated when every key is pressed.

-BEEP OFF mode: The beep is disabled.

LOUDNESS

Press BND/LOU button (13) for several seconds to reinforce the bass output. Press it for several seconds again to release this function.

DISPLAY

Press DSP button (15) to operate as the conversion of each display mode as follows:

-In case of receiving a RDS station In radio mode:

-> PS -> CT -> FREQ. -> PTY -> In CD mode:

-> CD -> CT -> PS -> FREQ. -> PTY ->

-In case of no receiving CT or PTY information, the display shows as “NO CLOCK” or “NO PTY”.

-In case of receiving a non RDS station In radio mode:

-> “NO CLOCK” -> FREQ. -> “NO PTY” ->

In CD (MP3) mode:

-> CD (MP3) -> CT -> FREQ. ->

GB-10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents CS-1004 MP3 Mobile Audio System Contents Installation Opening InstallationTake OUT Screw Before Installation Installing the unitRemoving the unit DIN REAR-MOUNT Method B Precautions when handing Using the Detachable Front PanelInstalling the Front Panel Removing the Front PanelWiring Connection ISO ConnectionOperation Location of KeysSound Adjustment Faceplate ReleaseLoudness DisplayRadio Operation Speech group CD Operation Switching to CD ModePausing Playing Selecting TracksSelecting Tracks in Single Step MP3 OperationEjecting a Disc Selecting Tracks by AMS/MPS MP3 ButtonPress BND/LOU Enter Audio Select MIXED-CD OperationDisc Notes CD Player SpecificationGeneral RadioTrouble Shooting Symptom Cause Solution

CS-1004 specifications

The Lenco Marine CS-1004 is an advanced control switch designed for boat owners looking to enhance their marine experience. This state-of-the-art switch integrates various features that not only improve functionality but also ensure durability and ease of use on the water.

One of the standout features of the CS-1004 is its robust construction, which is crafted to weather the challenging marine environment. The switch is made from high-quality materials that resist corrosion and ensure longevity, a critical factor for any marine component. Its design includes a weatherproof cover, providing additional protection against moisture and saltwater exposure.

The Lenco Marine CS-1004 is designed for versatility, making it suitable for a wide range of applications on boats, such as controlling trim tabs, LED lights, and other electrical systems. Its intuitive design allows for easy installation, enabling boat owners to swiftly incorporate the switch into their systems without significant modifications.

In terms of technology, the CS-1004 integrates a simple yet effective operational mechanism. Users can expect smooth and reliable performance thanks to its precision-engineered components. The switch features illuminated buttons, allowing for easy visibility in low-light conditions, which is particularly beneficial during nighttime operation on the water.

Safety is a critical consideration in marine applications, and the Lenco CS-1004 addresses this need by including built-in circuit protection. This feature safeguards against potential electrical surges, which can occur due to various reasons, enhancing the overall reliability of the system. Additionally, the switch is designed to operate seamlessly with Lenco's trim tab systems, making it an excellent choice for those already utilizing Lenco products.

Another notable characteristic of the CS-1004 is its ergonomic design. The button layout is user-friendly, allowing for quick access and operation, which can be crucial during critical maneuvers on the water. Boat operators appreciate how the switch responds to minimal effort, providing a more enjoyable boating experience.

In conclusion, the Lenco Marine CS-1004 is a feature-rich control switch that marries durability with advanced functionality. Its rugged construction, user-friendly design, and integrated safety features make it an indispensable component for boaters who seek reliability and ease of use in their marine electronics. With its versatility and robust technology, the CS-1004 stands as a trusted choice for enhancing the efficiency and enjoyment of recreational boating.
Top Page Image Contents