Lenco Marine CS-1004 owner manual Take OUT Screw Before Installation, Din Front/Rear-Mount

Page 3

INSTALLATION

Notes:

•Choose the mounting location where the unit will not interfere with the normal driving function of the driver.

•Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly.

•Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.

•Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.

•Install the unit where it does not get in the driver’s way and cannot injure the passenger if there is a sudden stop, like an emergency stop.

•If installation angle exceeds 30˚ from horizontal, the unit might not give its optimum performance.

30˚

•Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration.

DIN FRONT/REAR-MOUNT

This unit can be properly installed either from “Front” (conventional DIN Front- mount) or “Rear” (DIN Rear-mount installation, utilizing threaded screw holes at the sides of the unit chassis).

For details, refer to the following illustrated installation methods.

TAKE OUT SCREW BEFORE INSTALLATION

Before install the unit, please remove the two screws.

Take out screw before installation

DIN FRONT-MOUNT (Method A)

Installation Opening

This unit can be installed in any dashboard having an opening as show below:

53 mm

182 mm

Installing the unit

Be sure you test all connections first, and then follow these steps to install the unit.

1.Make sure the ignition is turned off, and then disconnect the cable from the vehicle battery's negative (-) terminal.

2.Disconnect the wire harness and the antenna.

3.Press the release button on the front panel and remove the control panel (see the steps of “using the detachable front panel”).

4.Lift the top of the outer trim ring then pull it out to remove it.

5.The two supplied keys release tabs inside the unit's sleeve so you can remove it. Insert the keys as far as they will go (will the notches facing up) into the appropriate slots at the middle left and right sides of the unit. Then slide the sleeve off the back of the unit.

GB-3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents CS-1004 MP3 Mobile Audio System Contents Installing the unit InstallationTake OUT Screw Before Installation Installation OpeningRemoving the unit DIN REAR-MOUNT Method B Removing the Front Panel Using the Detachable Front PanelInstalling the Front Panel Precautions when handingISO Connection Wiring ConnectionLocation of Keys OperationFaceplate Release Sound AdjustmentDisplay LoudnessRadio Operation Speech group Selecting Tracks Switching to CD ModePausing Playing CD OperationSelecting Tracks by AMS/MPS MP3 Button MP3 OperationEjecting a Disc Selecting Tracks in Single StepPress BND/LOU Enter MIXED-CD Operation Audio SelectDisc Notes Radio SpecificationGeneral CD PlayerSymptom Cause Solution Trouble Shooting

CS-1004 specifications

The Lenco Marine CS-1004 is an advanced control switch designed for boat owners looking to enhance their marine experience. This state-of-the-art switch integrates various features that not only improve functionality but also ensure durability and ease of use on the water.

One of the standout features of the CS-1004 is its robust construction, which is crafted to weather the challenging marine environment. The switch is made from high-quality materials that resist corrosion and ensure longevity, a critical factor for any marine component. Its design includes a weatherproof cover, providing additional protection against moisture and saltwater exposure.

The Lenco Marine CS-1004 is designed for versatility, making it suitable for a wide range of applications on boats, such as controlling trim tabs, LED lights, and other electrical systems. Its intuitive design allows for easy installation, enabling boat owners to swiftly incorporate the switch into their systems without significant modifications.

In terms of technology, the CS-1004 integrates a simple yet effective operational mechanism. Users can expect smooth and reliable performance thanks to its precision-engineered components. The switch features illuminated buttons, allowing for easy visibility in low-light conditions, which is particularly beneficial during nighttime operation on the water.

Safety is a critical consideration in marine applications, and the Lenco CS-1004 addresses this need by including built-in circuit protection. This feature safeguards against potential electrical surges, which can occur due to various reasons, enhancing the overall reliability of the system. Additionally, the switch is designed to operate seamlessly with Lenco's trim tab systems, making it an excellent choice for those already utilizing Lenco products.

Another notable characteristic of the CS-1004 is its ergonomic design. The button layout is user-friendly, allowing for quick access and operation, which can be crucial during critical maneuvers on the water. Boat operators appreciate how the switch responds to minimal effort, providing a more enjoyable boating experience.

In conclusion, the Lenco Marine CS-1004 is a feature-rich control switch that marries durability with advanced functionality. Its rugged construction, user-friendly design, and integrated safety features make it an indispensable component for boaters who seek reliability and ease of use in their marine electronics. With its versatility and robust technology, the CS-1004 stands as a trusted choice for enhancing the efficiency and enjoyment of recreational boating.
Top Page Image Contents