Regency F1100S, F3100L Stove Assembly Prior to Installation, Airmate Assembly for F1100 & F3100

Page 10

INSTALLATION

STOVE ASSEMBLY

PRIOR TO

INSTALLATION

All units require either the pedestal or 4 legs at- tached to the base.The F1100 and F3100 stoves require either theAirmate or Rear Heat Deflector on top of the stove. Clearances to combustible materialsvarydependingonwhethertheairmate or rear heat defl ector is installed, so be sure to check the Minimum Clearance to Combustible Materials section.

Airmate Assembly for F1100 & F3100

Small

850-105

Large

850-305

1)The airmate sits on top of the stove with the slots in the sides fi tting over the curved defl ector on the rear stove top. See diagram 1. Discard the Rear Heat Defl ector that is supplied with the unit, it is not required if the airmate is installed.

2)Center the airmate and push it forward to the front of the stove. The back of the airmate should be level with the back and sides of the rear heat shield. See Diagrams 2 & 3.

Rear Heat Deflector Assembly

for F1100 & F3100

Small

815-555

Large

815-556

The rear heat deflector is supplied with the stove and must be installed unless the optional airmate hasbeenselected.Itstopstheheatradiatedfrom the flue collar from overheating the rear wall.The rear heat defl ector is installed on top of the rear heat shield, as shown in Diagram 4.

Diagram 4

S3100L Side Shield Adjustment

The left and right side shields are lowered for shipping and handling. It allows for a handhold on the top of the stove. Before placing in the Step Stove in its fi nal position, the side shields must be raised.

Loosen the screws on the rear on the stove (3 per side), slide the side panel up as far as possible and then secure by tightening the screws.

Pedestal Assembly

Small

850-115

Large

850-315

1)For easier assembly, tip the stove on its back (onto a soft surface to prevent scratch- ing).

Hint: If you have chosen the Ash Drawer option, remove the ash dump cover plates before attaching the pedestal (refer to the Ashdrawer Kit Installation section).

2)Remove the blanking plate if:

a)youarenotinstallingoutsidecombustion air or

b)outside air is to be brought in from the rear of the stove.

3)Unscrew the 4 bolts in the under-side of the stove. Align the holes in the corners of the pedestal top with the corresponding holes in the base of the stove. Fasten using a bolt and washer for each corner.

Diagram 1

4) Push the Regency logo

into the two holes in

the front bot-

tom left corner of the pedestal

cover plate.

Diagram 2

Note: Any paint touch up should be done

 

 

prior to placing logo on pedestal.

 

5) If not using ash drawer, then cover plate must

 

beinstalled.Ifusingashdrawer,thendisregard

Diagram 3

cover plate.

10

Regency Freestanding Woodstove

Image 10
Contents Freestanding Woodstoves Regency Fireplace Product Table of Contents Safety Label Safety Label for F1100SSafety Label for F3100L Model Regency Large Freestanding Stove F3100LSafety Label for S3100L Modular Installation Options InstallationResidential Installation Room AIRResidential Installation C Vent Single Wall Minimum Clearance to Combustible MaterialsMinimum Alcove Clearance to Combustible Materials Floor ProtectionRear Heat Deflector Assembly For F1100 & F3100 Stove Assembly Prior to InstallationAirmate Assembly for F1100 & F3100 S3100L Side Shield AdjustmentStep by Step Chimney Connector Installation Leg and Bottom Shield AssemblyMasonry Fireplace Masonry ChimneyFactory Built Chimney Combustible Wall Chimney Connector PASS-THROUGHS Method B 9 228.6 mm Clearance to Combustible Wall MemberMobile Home Installation Recommended Heights for Woodstove FlueInstallation Listed Components for Mobile Home InstallationCanadian Installations Large Stoves F3100L and S3100L Brick Flue Baffle & Secondary AIR Tube InstallationSmall Stoves F1100S Optional Accessories Brick InstallationGlass Installation Door HandleBlower/Fan Draft Control Operating InstructionsOperating Instructions First FireASH Disposal Safety GuidelinesSafety Precautions FAN OperationMaintenance Parts List F1100 & F3100 Stove Main AssemblyS3100 Step Stove Main Assembly PEDESTAL, Bottom Shield & LEG Options Firebrick Regency Freestanding Woodstove Warranty Warranty LifetimeInstaller Please complete the following information
Related manuals
Manual 28 pages 40.44 Kb

F1100S, F3100L, S3100L specifications

The Regency S3100L, F3100L, and F1100S represent a trifecta of innovative solutions designed to elevate both residential and commercial heating experiences. These models are crafted with advanced technologies to ensure efficient operation and enhanced user comfort, making them ideal choices for various heating needs.

The Regency S3100L is a powerful wood-burning stove that stands out for its impressive heat output and sustainable design. With a maximum output of up to 76,000 BTUs, it effectively heats spaces up to 2,600 square feet. A hallmark feature of the S3100L is its secondary combustion technology, which significantly reduces emissions while maximizing heat efficiency. The stove’s clean glass window provides a captivating view of the flames, enhanced by the air-wash system that keeps the glass clear. Its durable construction and traditional aesthetic make it a timeless addition to any home.

Transitioning to the F3100L, this model offers versatility with its remarkable dual-fuel capability, supporting both natural gas and propane. Equipped with advanced electronic ignition and a powerful fan assist, the F3100L efficiently distributes warmth throughout larger areas. Additionally, its ceramic glass viewing area emphasizes the elegance of the flames while allowing for optimal heat retention. The stove features an adjustable thermostat that allows users to maintain the perfect temperature effortlessly, catering to personal preferences and ensuring comfort throughout varying seasons.

Lastly, the F1100S is designed for smaller spaces without compromising on performance. This compact yet robust wood-burning stove is capable of heating up to 1,500 square feet, making it ideal for cabins, smaller homes, or supplemental heat in larger spaces. The F1100S features a simple ash removal system, promoting ease of maintenance, while its sleek design and reduced footprint make it suitable for more confined environments. Like its counterparts, the F1100S includes secondary combustion technology that enhances efficiency and reduces emissions, reinforcing Regency’s commitment to sustainable heating solutions.

Collectively, the Regency S3100L, F3100L, and F1100S embody a commitment to quality, efficiency, and user-friendly features. Each model embraces modern technologies while delivering the timeless warmth and ambiance associated with traditional heating methods. Whether your needs are for expansive spaces or cozy retreats, these stoves epitomize the perfect blend of functionality and aesthetic appeal, making them valuable assets for any heating arrangement.