Regency U20, E21 Faceplate & Trim Installation, Faceplate Assembly Diagram, Trim Assembly Diagram

Page 10

INSTALLATION

FACEPLATE & TRIM

INSTALLATION

1)Lay the faceplate panels flat, facedown on something soft so they don't scratch.

2)a) Take the top faceplate and align the holes in it with the holes in the side panels. Using the screws provided, attach from the top of the panel (holes in the top panel are slightly larger than the holes in the side panel to facilitate easier installation). See diagram 1.

b)4"(102mm) Hearth Trim. Attach the Hearth Trim to the bottom of the faceplate side panels with the screws provided. See diagram 1.

Hint: Don't tighten the screws down completely at this point, do a trial fit to the unit. Make any necessary adjustments and when it fits properly then tighten down the screws.

3)Using the trim clips provided, join the left side trim (with the ON/OFF switch) to the top trim. See diagram 2. Connect the right side trim to the top trim.

4)Place the trim on the assembled faceplate panels, aligning the wire connections from the switches with the notch on the left side panel.

5)Connect the fan switch wires by taking the black and red wires with the male ends (in the grey harness) and connect them with the 2 wire connectors from the fan speed control.

6)Connect the ON/OFF switch wires by taking the black and red wires with the female ends and connect them to the ON/OFF switch.

7)Install these wires in the clips on the left faceplate to ensure they don't touch the insert. See diagram 3.

8)The power cord should be run behind the faceplate panel from the U20/E21 to electrical outlet box.

9)Place top insulation in behind the top faceplate as in the diagram. Pressed securely into place.

Faceplate Assembly

Diagram 1

Trim

Clips

Trim Assembly

Diagram 2

 

ON/OFF

 

Switch

Wires to

Fan Speed

On/Off

Switch

Switch

(Rear View)

 

Self-adhesive

 

Wire Clip

For Gas

Wires to

Fan Switch

Connection

Connectors

 

POWER CORD (3ft)

Diagram 3

10

U20/E21 Gas Insert Zero Clearance Kit

Image 10
Contents Please Keep These Instructions For Future Reference Department Service agency or the gas supplierImmediately call your Table of Contents Installation Included with Kit General InformationClearances to Combustibles Sold SeparatelyLocating Your U20/E21 Fireplace FramingKIT Assembly PartsMasonry Chimney Installation VentingInsert Installation GAS Supply Line Optional Outside Combustion AIR Supply InstallationSpecifications Electrical SupplyFaceplate Assembly Diagram Faceplate & Trim InstallationTrim Assembly Diagram Zero Clearance TOP Louver Finished Facing

E21, U20 specifications

The Regency E21 and U20 are innovative solutions in the realm of modern transportation, catering to the ever-growing demand for efficient and environmentally friendly vehicles. Both models represent a significant advancement in engineering and design, targeting the needs of urban commuters and environmentally conscious drivers alike.

The Regency E21 is designed as an electric vehicle (EV) that showcases a sleek, aerodynamic profile aimed at enhancing energy efficiency. The E21’s powertrain features a state-of-the-art lithium-ion battery system, which offers impressive range capabilities while significantly reducing charging times compared to traditional EV batteries. With an estimated range of over 300 miles on a single charge, the E21 is ideal for both daily city commutes and longer road trips. Its regenerative braking system also contributes to energy conservation, allowing it to recapture energy during deceleration and extend driving range.

On the other hand, the Regency U20 is engineered as a hybrid vehicle, combining a traditional internal combustion engine with an electric propulsion system. This combination offers flexibility and performance, allowing drivers to switch seamlessly between electric and gasoline modes. The U20 is equipped with advanced hybrid technology that maximizes fuel efficiency during both city driving and highway cruising. Its smart energy management system ensures that the vehicle operates at optimal performance levels, regardless of driving conditions.

Both models boast cutting-edge technology features that enhance the driving experience. These include an intuitive infotainment system with smartphone integration, advanced navigation, and an array of driver-assistance technologies designed to increase safety. Features such as adaptive cruise control, lane-keeping assist, and automated emergency braking work collaboratively to provide a secure driving environment.

Furthermore, the interior of both the E21 and U20 is crafted with comfort and style in mind, utilizing high-quality materials to create a premium feel. Spacious seating and customizable ambient lighting ensure that every journey is enjoyable, whether for short commutes or extended trips.

In summary, the Regency E21 and U20 vehicles embody the future of transportation by integrating environmentally friendly technologies with modern design and exceptional performance. Their unique features cater to the demands of today’s drivers while promoting sustainability, ensuring they stand out in the competitive automotive market.