Regency installation manual Locating Your U20/E21 Fireplace, Framing

Page 5

INSTALLATION

LOCATING YOUR U20/E21 FIREPLACE

Due to high temperatures the Insert should be located out of traffic and away from furniture and draperies. Provide a minimum of 48" (1220mm) front clearance to the unit.

This appliance is Listed for bedroom installations when used with a Listed Millivolt Thermostat. Some areas may have further requirements, check local codes before installation.

AB

F

C

D

E

This appliance is Listed for Alcove installations, maintain minimum Alcove clearances as follows, minimum ceiling height of 53-1/2", minimum width of 48" and a maximum depth of 36".

This unit is not approved for installation into a mobile home.

a) Cross Corner d) Island

b)Room Divider e) Flush with Wall

c) Flat on wall

f) Flat on Wall

 

Corner

FRAMING

1)The trim kit allows for 1/2" (13 mm) of finish facing material. The kit may be installed directly on and/or against standard combustible building materials.

2) Frame in the Zero Clearance box for the Kit with framing material. The framed opening for the assembled kit is 29-3/ 4" (756mm) high x 30.25" (768mm) wide x 16.5" (419mm) (17" (432mm) including drywall) deep. See diagram below.

3) For exterior walls, vapour barrier and insulate the Zero Clearance box to the same

degree as the rest of the house, or according to local installation codes.

4)The appliance may be

enclosed above the standoffs on the cabinet but the clearances stated on the b-vent chimney must be maintained.

U20/E21 Gas Insert Zero Clearance Kit

5

Image 5
Contents Immediately call your Department Service agency or the gas supplierPlease Keep These Instructions For Future Reference Table of Contents Installation Clearances to Combustibles General InformationIncluded with Kit Sold SeparatelyFraming Locating Your U20/E21 FireplaceParts KIT AssemblyVenting Masonry Chimney InstallationInsert Installation Specifications Optional Outside Combustion AIR Supply InstallationGAS Supply Line Electrical SupplyTrim Assembly Diagram Faceplate & Trim InstallationFaceplate Assembly Diagram Finished Facing Zero Clearance TOP Louver

E21, U20 specifications

The Regency E21 and U20 are innovative solutions in the realm of modern transportation, catering to the ever-growing demand for efficient and environmentally friendly vehicles. Both models represent a significant advancement in engineering and design, targeting the needs of urban commuters and environmentally conscious drivers alike.

The Regency E21 is designed as an electric vehicle (EV) that showcases a sleek, aerodynamic profile aimed at enhancing energy efficiency. The E21’s powertrain features a state-of-the-art lithium-ion battery system, which offers impressive range capabilities while significantly reducing charging times compared to traditional EV batteries. With an estimated range of over 300 miles on a single charge, the E21 is ideal for both daily city commutes and longer road trips. Its regenerative braking system also contributes to energy conservation, allowing it to recapture energy during deceleration and extend driving range.

On the other hand, the Regency U20 is engineered as a hybrid vehicle, combining a traditional internal combustion engine with an electric propulsion system. This combination offers flexibility and performance, allowing drivers to switch seamlessly between electric and gasoline modes. The U20 is equipped with advanced hybrid technology that maximizes fuel efficiency during both city driving and highway cruising. Its smart energy management system ensures that the vehicle operates at optimal performance levels, regardless of driving conditions.

Both models boast cutting-edge technology features that enhance the driving experience. These include an intuitive infotainment system with smartphone integration, advanced navigation, and an array of driver-assistance technologies designed to increase safety. Features such as adaptive cruise control, lane-keeping assist, and automated emergency braking work collaboratively to provide a secure driving environment.

Furthermore, the interior of both the E21 and U20 is crafted with comfort and style in mind, utilizing high-quality materials to create a premium feel. Spacious seating and customizable ambient lighting ensure that every journey is enjoyable, whether for short commutes or extended trips.

In summary, the Regency E21 and U20 vehicles embody the future of transportation by integrating environmentally friendly technologies with modern design and exceptional performance. Their unique features cater to the demands of today’s drivers while promoting sustainability, ensuring they stand out in the competitive automotive market.