Lopi Revere owner manual Limited 7 Year Warranty, Years 1 & 2 Coverage Parts & Labor

Page 27

Limited 7 Year Warranty

27

To register your TRAVIS INDUSTRIES, INC. 7 Year Warranty, complete the enclosed warranty card and mail it within ten (10) days of the appliance purchase date to: TRAVIS INDUSTRIES, INC., 4800 Harbour Pointe Blvd. SW, Mukilteo, WA 98275. TRAVIS INDUSTRIES, INC. warrants this gas appliance (appliance is defined as the equipment manufactured by Travis Industries, Inc.) to be defect-free in material and workmanship to the original purchaser from the date of purchase as follows:

Check with your dealer in advance for any costs to you when arranging a warranty call.

Mileage or service charges are not covered by this warranty. This charge can vary from store to store.

Years 1 & 2 - COVERAGE: PARTS & LABOR

Firebox Assembly:

Ceramic Glass

Re-Installation Allowance

Firebox, Baffle Supports, Air Tubes, Air Channels, Convection Chamber

Glass (breakage from thermal shock)

In cases where heater must be removed from home

Door Assembly:

Firebrick

for repairs, a partial cost of re-installation is covered

Solid Brass or Cast Door, Latch Assembly, Glass Retainers

(pre-authorization required)

 

 

Plated Finish

Breakage from thermal shock

Accessories

Plated Door, Legs, etc… See "Conditions & Exclusions" # 9 below.

Air Control Assembly

Legs, Pedestal, Panels, Blower

Slider Plate, Pressure Plate

 

One-Way Freight Allowance

One-way freight allowance on pre-authorized repair done at factory is covered.

Exclusions:

Paint, Gasketing

Years 3 Through 5 - COVERAGE: PARTS & LABOR

Firebox Assembly:

Firebox, Baffle Supports, Air Tubes, Air Channels, Convection Chamber

Air Control Assembly

Slider Plate, Pressure Plate

Door Assembly:

One-Way Freight Allowance

Solid Brass or Cast Door, Latch

One-way freight allowance on pre-authorized

Assembly, Glass Retainers

repair done at factory is covered.

Exclusions: Paint, Gasketing, Plated Finish, Accessories (Legs, Pedestal, Panels, Blower), Glass, Firebrick, Re-Installation Allowance

Years 6 & 7 - COVERAGE: PARTS ONLY

Firebox Assembly:

Door Assembly:

Air Control Assembly

Firebox, Baffle Supports, Air Tubes, Air Channels, Convection Chamber

Solid Brass or Cast Door, Latch Assembly, Glass Retainers

Slider Plate, Pressure Plate

Exclusions: Paint, Gasketing, Plated Finish, Accessories (Legs, Pedestal, Panels, Blower), Glass, Firebrick, Re-Installation Allowance, One- Way Freight Allowance, Labor

CONDITIONS & EXCLUSIONS

1.This new appliance must be installed by a qualified installer. It must be installed, operated, and maintained at all times in accordance with the instructions in the Owner’s Manual. Any alteration, willful abuse, accident, neglect, or misuse of the product shall nullify this warranty.

2.This warranty is nontransferable, and is made to the ORIGINAL purchaser, provided that the purchase was made through an authorized Travis dealer.

3.Discoloration and some minor expansion, contraction, or movement of certain parts and resulting noise, is normal and not a defect and, therefore, not covered under warranty. Over-firing (operation where the steel may glow red) of this appliance can cause serious damage and will nullify this warranty.

4.The warranty, as outlined within this document, does not apply to the chimney components or other Non-Travis accessories used in conjunction with the installation of this product. If in doubt as to the extent of this warranty, contact your authorized Travis retailer before installation.

5.Travis Industries will not be responsible for inadequate performance caused by environmental conditions such as nearby trees, buildings, roof tops, wind, hills or mountains or negative pressure or other influences from mechanical systems such as furnaces, fans, clothes dryers, etc.

6.This Warranty is void if:

a.The unit has been operated in atmospheres contaminated by chlorine, fluorine or other damaging chemicals.

b.The unit is subject to submersion in water or prolonged periods of dampness or condensation.

c.Any damage to the unit, combustion chamber, heat exchanger or other components due to water, or weather damage which is the result of, but not limited to, improper chimney/venting installation.

7.Exclusions to this 7 Year Warranty include: injury, loss of use, damage, failure to function due to accident, negligence, misuse, improper installation, alteration or adjustment of the manufacturer's settings of components, lack of proper and regular maintenance, damage incurred while the appliance is in transit, alteration, or act of God.

8.This 7 Year warranty excludes damage caused by normal wear and tear, such as paint discoloration or chipping, worn or torn gasketing, chipped or cracked firebrick, etc. Also excluded is damage to the unit caused by abuse, improper installation, modification of the unit, or the use of fuel other than that for which the unit is configured (use cord wood only).

9.Damage to brass or plated surfaces caused by fingerprints, scratches, melted items, or other external sources left on the surfaces from the use of abrasive cleaners is not covered in this warranty. Damage to the surfaces from over-firing (operation where the steel may glow red) is not covered in this warranty.

10.TRAVIS INDUSTRIES, INC. is free of liability for any damages caused by the appliance, as well as inconvenience expenses and materials. Incidental or consequential damages are not covered by this warranty. In some states, the exclusion of incidental or consequential damage may not apply.

11.This warranty does not cover any loss or damage incurred by the use or removal of any component or apparatus to or from the Travis appliance without the express written permission of TRAVIS INDUSTRIES, INC. and bearing a TRAVIS INDUSTRIES, INC. label of approval.

12.Any statement or representation of Travis products and their performance contained in Travis advertising, packaging literature, or printed material is not part of this 7 year warranty.

13.This warranty is automatically voided if the appliance’s serial number has been removed or altered in any way. If the appliance is used for commercial purposes, it is excluded from this warranty.

14.No dealer, distributor, or similar person has the authority to represent or warrant Travis products beyond the terms contained within this warranty. TRAVIS INDUSTRIES, INC. assumes no liability for such warranties or representations.

15.Travis Industries will not cover the cost of the removal or re-installation of hearths, facing, mantels, venting or other components.

16.If for any reason any section of this warranty is declared invalid, the balance of the warranty remains in effect and all other clauses shall remain in effect.

17.This 7 year warranty is the only warranty supplied by Travis Industries, Inc., the manufacturer of the appliance. All other warranties, whether express or implied, are hereby expressly disclaimed and purchaser’s recourse is expressly limited to the warranties set forth herein.

IF WARRANTY SERVICE IS NEEDED:

1.If you discover a problem that you believe is covered by this warranty, you MUST REPORT it to your Travis dealer WITHIN 30 DAYS, giving them proof of purchase, the purchase date, and the model name and serial number.

2.Travis Industries has the option of either repairing or replacing the defective component.

3.If your dealer is unable to repair your appliance’s defect, he may process a warranty claim through TRAVIS INDUSTRIES, INC., including the name of the dealership where you purchased the appliance, a copy of your receipt showing the date of the appliance’s purchase, and the serial number on your appliance. At that time, you may be asked to ship your appliance, freight charges prepaid, to TRAVIS INDUSTRIES, INC. TRAVIS INDUSTRIES, INC., at its option, will repair or replace, free of charge, your appliance if it is found to be defective in material or workmanship within the time frame stated within this 7 year warranty. TRAVIS INDUSTRIES, INC. will return your appliance, freight charges (years 1 to 5) prepaid by TRAVIS INDUSTRIES, INC., to your regional distributor, or dealership.

4.Check with your dealer in advance for any costs to you when arranging a warranty call. Mileage or service charges are not covered by this warranty. This charge can vary from store to store.

© Travis Industries

100-01165

4040806

Image 27
Contents Revere Fireplace Insert Mail your Warranty Card Today, and Save Your Bill of Sale 2IntroductionIntroduction Important Information Table of Contents Ashes Safety PrecautionsMobile Travis Industries, Inc. grants no warranty, implied orDimensions Features & SpecificationsInstallation Options Features Heating SpecificationsInstallation Considerations Planning The InstallationPreparation for Installation Additional Accessories Needed for InstallationFireplace Requirements Minimum Fireplace SizeInsert Placement Requirements Hearth RequirementsMasonry Fireplace Requirements Leveling Bolt Installation Zero-Clearance Metal Fireplace RequirementsDrafting Performance Block-Off Plate Template Block-Off Plate InstallationFireplace Insert with Positive ConnectionInsert with Direct MasonryInsert with Face Seal Connection Insert with Direct Connection Z.C. FireplaceOpening the Door Safety NoticeOperating Your Appliance Before Your First FireBypass Operation Starting a Fire Adjusting the Burn Rate Approximate Air Control SettingsAsh Removal Normal Operating Sounds Optional Blower OperationRe-Loading the Stove Overnight BurnSelecting Wood Testing Wood MoistureWhy Dry Wood is Key Hints for BurningTroubleshooting Remove Ash if necessary Daily Maintenance while stove is in useClean the Glass if necessary Maintaining Your ApplianceMonthly Maintenance while appliance is in use Door and Glass InspectionCreosote Formation and Need for Removal Firebrick and Baffle Inspection Yearly MaintenanceCleaning the Air Duct and Blower if applicable Touch Up PaintReplacing the Door Handle Door PartsReplacing the Glass Replacing the Door GasketFirebox Parts Floor and Side Firebrick Removal & ReplacementAir Tube Removal & Replacement Baffle Removal & ReplacementYears 6 & 7 Coverage Parts only Limited 7 Year WarrantyYears 1 & 2 Coverage Parts & Labor Years 3 Through 5 Coverage Parts & LaborListing Label Listing LabelOptional Equipment Door Shell InstallationHex Wrench Arched Panels Installation InstructionsSurround Panels Rectangular PanelsTop Trim Panel Bracket Right Side Front Blower To Switch The Power Cord To The Left SideIndex

Revere specifications

The Lopi Revere is a highly efficient and stylish wood stove that stands out in the market for its superb heating capabilities and modern design. Ideal for both residential and commercial settings, the Revere model seamlessly combines traditional wood-burning aesthetics with cutting-edge technology to deliver an optimal heating experience.

One of the main features of the Lopi Revere is its impressive heat output. The stove produces up to 75,000 BTUs, making it suitable for heating spaces ranging from 1,000 to 2,500 square feet. This makes the Revere an excellent choice for those living in larger homes or those seeking to create a cozy atmosphere in expansive living areas. The extended burn time of up to 12 hours on a single load of wood ensures that users can enjoy prolonged warmth without the hassle of constant reloading.

The Lopi Revere is constructed from high-quality materials, ensuring durability and longevity. The heavy-duty steel body not only adds to the aesthetic appeal but also enhances heat retention and distribution. Additionally, its ceramic glass door allows users to enjoy a captivating view of the flames while maintaining safety and efficiency. The large firebox can accommodate logs up to 20 inches, providing ample room for longer burn times.

Equipped with advanced combustion technology, the Lopi Revere ensures a clean and efficient burn. The stove features a secondary combustion system that maximizes heat output while minimizing emissions. By utilizing a combination of primary and secondary air controls, the Revere achieves optimal airflow, resulting in a cleaner burn that is more environmentally friendly.

Another characteristic that sets the Lopi Revere apart is its ease of use. The simple, adjustable air intake and ash removal system allow for seamless operation and maintenance. Users can easily regulate the heat output and control the burn rate according to their specific heating needs.

With its versatile design, the Lopi Revere is available in several finishes, including classic black and modern painted options, allowing homeowners to match the stove to their interior style. Whether positioned in a rustic cabin or a contemporary home, the Lopi Revere adds both functionality and aesthetic value.

In summary, the Lopi Revere is a modern wood stove that brings together efficiency, style, and advanced technology, making it an outstanding choice for anyone looking to enhance their home heating experience.