Lopi manual Specifications

Page 7

 

Specifications

5

 

Heating Specifications:

 

 

 

Approximate Maximum Heating Capacity (in square feet)*

800 to 1,600 Sq. Feet

 

Burn Rate (Pounds per Hour)**

1.0 to 3.5

 

Maximum Burn Time on Low Burn**

10 - 30 Hours

 

Hopper Capacity

35 Pounds

*Heating capacity will vary depending on the home's floor plan, degree of insulation, and the outside temperature. It is also affected by the fuel size, quality, and moisture level.

**Small pellets will increase or decrease the stated burn rates and burn times. Differences of plus or minus 20% depending on fuel quality may occur.

Dimensions:

28-7/8”* for

8” x 10” Panels

31-7/8”* for

10” x 13” Panels

Center of 3” diameter Flue is 9-3/8” above the baseplate and 5-1/8” left of center

18-5/8"

22"

19-5/8"

22-1/8”

Measure clearances to the hopper lid.

40-1/2”* for 8” x 10” Panels

11-5/8"*

 

44-1/2”* for 10” x 13” Panels 9-1/2"*

* Includes trim and the required 3/8” gap between the surround panels and fireplace.

Electrical Specifications:

Electrical Rating

115 Volts, 3.6 Amps, 60 Hz

Watts During Start-Up Sequence

400 (approximately)

Watts During Operation

180 (approximately)

Fuel:

 

The unit is designed for wood pellets that comply with the standards set by the Association of Pellet Fuel Industry (density of at least 40 lbs. per cubic foot, 1/4" to 5/16" diameter, length no greater than 1–1/2", 8200 BTU's/lb., moisture under 8% by weight, ash under 1% by weight, and salt under 300 parts per million). If the fuel does not comply to this standard, the unit may not operate as designed.

EPA Compliance:

This heater is EPA exempt from Phase II requirements, but has been tested for emissions using EPA test methods by OMNI Test Labs.

Travis Industries

4 0 5 1 2 1 6

9 3 5 0 8 0 5 1

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Pioneer Bay Pellet Insert Page Introduction Important Information Introduction1Travis Industries 5 1 2 1 5 0 8 0 5 2Safety Precautions Mobile Home Safety PrecautionsTable of Contents Specifications 6Installation Installation7 Venting the Pellet Stove 8InstallationMobile Home Requirements Installation9Outside Air used for combustion Too Much Air 0InstallationRestrictor Adjustment Not Enough AirSurround Panel & Circuit Board Installation Installation1Installation into a Masonry Fireplace 2InstallationTravis Industries 7 0 2 0 5 0 8 0 5 Installation into a Factory Built Metal FireplaceStarting the Heater for the First Time Safety Notice4Operation Location of ControlsLoading Pellets Operation1Two Modes of Operation To Start Manual ModeTo Adjust the Heat 6OperationTo Adjust Room Temperature or Start the Stove Auto Mode8Operation Adjusting the Fan SpeedManual Auger Button Fault LightPower Outages Start-Up SequenceMake Sure Pellets are Not Piling Up 0MaintenanceDaily Maintenance whenever using the heater Inspect the BurnCleaning the Firepot Maintenance2Check Firepot for Clinkers Cleaning the Optional Gold Surfaces Door and optional Grill 2MaintenanceBi-Weekly Maintenance or every 10 bags of pellets Clean the Heat Exchange TubesOpening The Door Let the stove cool completely before conducting serviceClean the Glass 4MaintenanceCheck Ashbox, Ashpan, Dispose Ash If Necessary Sweep Ash Into Ashpan Yearly Maintenance or every two tons 6MaintenanceClean the Vent make sure the heater and vent is cool Check for Air Leaks Around the Door, Glass, and Ashpan 8MaintenanceReplacement Parts List Maintenance0Normal Operating Sounds Serial No Safety LabelYears 1 & 2 Coverage Parts & Labor Limited 7 Year WarrantyGold Grill Optional EquipmentThermostat 4Optional EquipmentOptional Gold Door Optional LogTravis Industries 6 0 2 1 5 0 8 0 5 Travis Industries 2 0 2 0 5 0 8 0 5 6Index

Masonry Fireplace Factory Built (Metal) Fireplace Mobile Home Model: Pioneer Bay (Heritage Bay PI) specifications

The Lopi Masonry Fireplace Factory Built (Metal) Fireplace Mobile Home Model: Pioneer Bay, also known as Heritage Bay PI, represents a fusion of modern technology and classic design tailored for mobile homes. This fireplace model has been thoughtfully engineered to offer both style and functionality, making it an ideal choice for homeowners looking to enhance their living space with an elegant heating solution.

One of the standout features of the Pioneer Bay is its impressive heating capacity. With a BTU output that ensures efficient heating, this fireplace is capable of warming larger areas without sacrificing comfort. It's designed to be a primary heat source, efficient enough to keep a mobile home cozy even in the coldest months.

Installation versatility is another hallmark of the Pioneer Bay. Its factory-built construction allows for straightforward installation in various settings within mobile homes, complying with various local building codes. This model typically comes equipped with a venting system that can be adapted for both vertical and horizontal configurations, providing homeowners with the flexibility to select the best setup for their space.

Aesthetically, the Heritage Bay PI boasts a sleek and contemporary design, featuring clean lines and a large fire viewing area. The fireplace is framed with durable metal, ensuring longevity and minimal maintenance. The glass door enhances the visual appeal while offering a clear view of the flames, creating a warm and inviting atmosphere.

In terms of technology, the Pioneer Bay incorporates advanced combustion systems that optimize fuel efficiency and reduce emissions. By utilizing a secondary combustion process, it maximizes the burn time of the fuel while minimizing particulate matter released into the atmosphere. This not only makes the fireplace more environmentally friendly but also reduces the frequency of firewood replenishment.

Safety is a priority in the design of the Pioneer Bay. It features a secure glass door with a built-in air wash system designed to keep the glass clean and reduce heat transfer to exterior surfaces. Additionally, the overall design complies with stringent safety standards, ensuring peace of mind for families.

In conclusion, the Lopi Masonry Fireplace Factory Built Mobile Home Model: Pioneer Bay (Heritage Bay PI) epitomizes a balance of warmth, aesthetics, efficiency, and safety. It is an ideal choice for mobile home owners seeking a stylish yet functional heating solution, elevating the overall comfort and ambiance of their living spaces. This fireplace makes for a perfect combination of modern technology and traditional wood-burning charm, resulting in a reliable and delightful home heating experience.
Top Page Image Contents