Lopi 864 ST 10Maintenance, Maintaining Your Fireplaces Appearance, Yearly Service Procedure

Page 10

10Maintenance

Maintaining Your Fireplace's Appearance

Fingerprints or other marks left on the optional plated surface may become etched in place if they are not wiped clean prior to turning the fireplace on. Clean the plated surface with denatured alcohol and a soft cloth (with the fireplace cool). Other cleaners may leave a film that may become etched into the surface.

Yearly Service Procedure

•Failure to inspect and maintain the fireplace may lead to improper combustion and a potentially dangerous situation. We recommend the following procedures be done by a qualified technician.

1.Check the pilot flame. It should touch approximately 3/8" of the top of the thermopile and touch the top of the thermocouple (see illustration below). If it does not, contact your dealer for service.

2.Shut off gas to the fireplace by turning the gas control knob to "OFF" (see step A under "Starting the Pilot" on page 7). Let the fireplace cool for 15 minutes. Remove the glass (see page 10).

3.Remove the log set (NOTE: the logs are very fragile - see page 15). If severely deteriorated, replace. Check the logs for sooting. A small amount of soot along the bottom of the logs is normal. If excessive sooting is found, the fireplace will require adjustment. Contact your dealer.

4.Inspect the burner and remove any debris.

•Make sure the burner is not warped, cracked, or damaged.

•Check the firebox and area around the pilot to make sure there is no warping or damage.

•If any problem is found, discontinue use and contact your dealer for service.

Check the walls and ceiling of the firebox for deterioration.

Before Disassembly - Check the pilot flame (it can be viewed from the front - you will need to look under the center log). It should touch the thermocouple and thermopile.

Check the burner holes.

Thermopile

Pilot Hood

Thermocouple

Make sure the burners are not warped or damaged.

5.Replace the log set. Clean and replace the glass (see Glass Cleaning on page 25). If the glass is damaged, replace. Make sure the gasket along the perimeter of the glass contacts the face of the firebox and forms an air-tight seal. If it does not, re-align or replace the gasket to insure an air-tight seal.

6.Inspect the area behind the access door. Clean if necessary. Check the gas control valve and the gas lines. If damage is found, discontinue use and contact your dealer for service. Clean the air channels, ducts, and blower (if applicable).

7.Start the pilot and turn on the main burner. The flames should be orange/yellow and not touch the top of the firebox. If the pilot or main burners do not burn correctly, contact your dealer for service. Monitor the blower operation.

8.Remove any debris or vegetation near the vent termination. Contact your dealer if any sooting or deterioration is found near the vent termination.

© Travis Industries

4071130

100-01196_000

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Operation Maintenance ST Fireplace2Introduction Installation WarningsIntroduction Important Information Heating Specifications Table of ContentsFeatures Introduction3Safety Precautions If YOU Smell GASDo not place anything inside Before You Begin 6OperationLocation of Controls front side only Operation Starting The Pilot FlameStarting the Fireplace for the First Time Adjusting the Flame Height8Operation Turning the Fireplace On and OffNormal Operating Sounds Adjusting the Optional Blower SpeedOperation9 Normal Operating OdorsYearly Service Procedure 10MaintenanceMaintaining Your Fireplaces Appearance Maintenance11 Grill Installation and Removal12Maintenance Face Installation and RemovalMaintenance13 Glass Frame Removal and Installation14Maintenance Log Set Installation Maintenance15Logs in Place Front Side Logs in Place Back Side Maintenance Center Log InstallationMaintenance17 Front Left Log18Maintenance Front Left Upper LogMaintenance19 Front Upper Center Log20Maintenance Back Left LogRight Ember Chunk Maintenance21Back Ember Chunk 22Maintenance Maintenance23 Back Upper Right Log24Maintenance Ember PlacementMaintenance25 Glass Cleaning26Maintenance Troubleshooting TableWhat Turns the Main Burners On and Off Maintenance27How this Fireplace Works What Prevents Gas BuildupReplacement Parts List 28MaintenanceWiring Diagram Millivolt Wiring stock configurationWarranty29 Years 1 & 2 Coverage Parts & LaborOptional Equipment AccessoriesRemote Control FirebacksOptional Equipment 32Index Index

864 ST specifications

The Lopi 864 ST is a high-efficiency gas fireplace that brings both elegance and practicality to modern living spaces. With its sleek design and impressive heating capabilities, it has quickly become a popular choice for homeowners looking to enhance their interior ambiance while also enjoying the benefits of a functional heating source.

One of the standout features of the Lopi 864 ST is its large viewing area. The fireplace boasts expansive glass doors that provide an unobstructed view of the flames, creating a stunning focal point in any room. The flames can be enjoyed from multiple angles, making it an ideal centerpiece for open-concept living spaces and large rooms. The clean, contemporary design complements various décor styles, from modern to rustic.

The Lopi 864 ST incorporates advanced technologies to enhance performance and efficiency. It is equipped with a powerful heating system that can generate up to 37,000 BTUs, effectively heating spaces ranging from 1,000 to 2,000 square feet, depending on insulation and layout. This makes it a suitable option for both supplemental and primary heating solutions. Moreover, the fireplace features an ENERGY STAR certification, ensuring that it meets rigorous energy efficiency standards.

User convenience is another hallmark of the Lopi 864 ST. It comes with an easy-to-use remote control, allowing homeowners to adjust settings, including flame height and blower speed, from the comfort of their seating area. The variable fan speed and programmable thermostat add to the customization, ensuring optimal comfort throughout the year.

Safety is also a priority in the design of the Lopi 864 ST. The fireplace includes features such as a safety shut-off mechanism, glass doors that remain cool to the touch, and a venting system designed to minimize the risk of hazardous fumes entering the home. This practicality, combined with an aesthetically pleasing appearance, makes it a smart addition to any living space.

In conclusion, the Lopi 864 ST is not just a fireplace; it is a unit that combines innovative technology, design, and safety. With its impressive heating capabilities, modern aesthetics, and ease of use, it provides a perfect blend of comfort and style, making it an excellent choice for those looking to enhance their home environment.
Top Page Image Contents