Regency I1200S installation manual Installation Into a Factory Built Fireplace

Page 10

INSTALLATION

INSTALLATION INTO A MASONRY FIREPLACE

When referencing installation or connec- tion to masonry fi replaces or chimneys, the masonry construction must or shall be code complying.

The insert must be installed as per the require- ments of your local inspection authority. Three methods of fl ue connection are acceptable in most areas, these include:

1)Positive fl ue connection, where a large blocking plate and a short connector pipe is used.

2)Direct fl ue connection, where a smaller blocking plate and a connector pipe to the fi rst fl ue liner tile is used.

3)Full fl ue liner, where a stainless steel rigid or fl exible liner pipe is routed from the insert outlet collar to the top of the chimney.

Regency highly recommends the use of a full liner as the safest installation and provides the mostoptimumperformance. Your retailer should be able to help you decide which system would be the best for your application.

1) Positive Flue

2) Direct Flue

 

 

 

Connection

Connection

 

 

 

with Cleanout

with Cleanout

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3a) Full Flue Liner

(No Cleanout

Required)

In Canada this fireplace insert must be installed with a continuous chimney liner of 6" diameter extending from the fire- place insert to the top of the chimney. The chimney liner must conform to the Class 3 requirements of CAN/ULC-S635 or CAN/ ULC-S640, Standard for Lining Systems for New Masonry Chimneys.

Note: A clean-out door is sometimes required, by your inspector, to be installed when either the Positive flue connection or Direct flue connection method is used.

The use of one of the connection methods listed on this page not only increases the safety of your insert by directing the hot gases up the fl ue, but will also help increase the unit's effi ciency and decrease creosote deposits in the chimney.

When a connected fl ue or liner is in use, the insert is able to “breathe” better by allowing a greater draft to be created. The greater draft can decrease problems such as, diffi cult start-ups, smoking out the door, and dirty glass.

INSTALLATION INTO A

FACTORY BUILT

FIREPLACE

1)When installed in a factory built fi replace, a full stainless steel rigid or fl exible fl ue liner is mandatory, for both safety and perform- ance purposes. When a fl ue or liner is in use, the insert is able to breathe better by allowing a greater draft to be created. The greater draft can decrease problems such as, diffi cult start-ups, smoking out the door, and dirty glass.

2)In order to position the fl ue liner, the exist- ing rain cap must be removed from your chimney system. In most cases the fl ue damper should also be removed to allow passage of the liner.

3)In most cases opening the existing spark screens fully should give enough room for the insert installation. If it does not, remove and store.

4)If the fl oor of your fi replace is below the level of the fi replace opening, adjust the insert's levelling bolts to accommodate the difference. When additional shimming is required, use non-combustible masonry or steel shims.

5)Measure approximately the alignment of the flue liner with the position of the smoke outlet hole on the insert to check for possible offset. If an offset is required, use the appropriate offset adaptor in your installation.

6)Once the above items have been checked, slide your insert into position after fi rst po- sitioning and securing the fl ue liner to the offset adaptor.

Attach the rod to the adaptor and slide the adaptor onto the unit as the unit is slid into position. Ensure a positive connection.

Secure the adaptor to the unit by using 2 bolts, fl at washers, lock washers and one screw in the front.

Re-install raincap at completion of installa- tion.

10

I1200 Regency Wood Insert

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Wood Insert 918-665a 07/12/07Regency Fireplace Product Table of Contents I1200 Safety LabelRegency Wood Insert Unit Dimensions With Standard Flue AdaptorWith Offset Flue Adaptor Chimney Specifications InstallationBefore Installing Your Insert Fireplace SpecificationsBtu Hrft 2 Masonry and Factory Built Fireplace Clearances203mm = Btuinch Hrft 3Installation Installing Your InsertRe-install the door if removed prior to Diagram I1200 Regency Wood InsertPositive Flue Direct Flue Connection With Cleanout Installation Into a Factory Built Fireplace3a Full Flue Liner No Cleanout Required Regular/Oversize Faceplate Installation Regular/Oversize Faceplate Trim Installation Completed Faceplate Assembly FAN / Blower Draft Control Screen Door First FireFAN Operation Some Safety GuidelinesOperating Instructions ASH DisposalMaintenance Main Assembly Parts ListGrommet Strain Relief Faceplates 171-920 Faceplate & Trim Set Regular BlackFirebrick I1200 Regency Wood Insert Warranty Warranty LifetimeInstaller Please complete the following information

I1200S specifications

The Regency I1200S is a remarkable addition to the world of portable radios, combining advanced technology with user-friendly features designed for both casual listeners and audio enthusiasts. This model exemplifies Regency's commitment to quality, performance, and innovation in communication devices.

One of the standout features of the Regency I1200S is its impressive reception capabilities. Thanks to an advanced DSP (Digital Signal Processing) technology, users can enjoy crystal-clear sound quality across a wide range of frequencies. This technology helps in minimizing static and distortion, ensuring that every transmission is crisp and easy to understand.

The I1200S is designed for versatility, supporting multiple bands including AM, FM, and shortwave. This broad coverage allows users to tune into their favorite local stations or explore international broadcasts, making it an ideal companion for travelers and radio enthusiasts alike. The inclusion of a digital display enhances usability, providing clear information on frequency and signal strength.

Another key characteristic of the Regency I1200S is its durability. Constructed with high-quality materials, it is built to withstand the rigors of travel and outdoor use. The lightweight design and compact size make it easy to carry, while the ergonomic controls ensure that users can operate the device without hassle, even in challenging conditions.

Battery life is another critical aspect where the I1200S excels. The radio is equipped with an efficient power management system that allows for extended usage on either rechargeable or disposable batteries. This feature is particularly beneficial for outdoor enthusiasts who may be away from power sources for extended periods.

Moreover, the I1200S includes practical features such as a headphone jack for private listening and a built-in speaker for group enjoyment. The intuitive controls allow users to easily switch between modes, adjust volume, and navigate through channels without confusion.

In summary, the Regency I1200S stands out as a top-tier portable radio, merging advanced technologies with practical features. Its robust reception, user-friendly design, and durability make it an exceptional choice for anyone looking to enjoy high-quality audio and reliable communication, whether at home, on the road, or in nature.
Top Page Image Contents