Regency I1200S Installing Your Insert, Re-install the door if removed prior to, Installation

Page 9

INSTALLATION

INSTALLING

YOUR INSERT

SAFETY NOTE: The insert is very heavy and will require two or three people to move it into position. The insert can be made a little lighter by removing the cast iron door by opening it and lifting it off its hinges. Be sure to protect your hearth extension with a heavy blanket or carpet scrap during the installation.

NOTE: You will be required to purchase either the standard or offset 6" diameter (152mm)

flue adaptor that is best suited for the specifi c installation.

List of Tools needed;

-Pull Rod (included with insert)

-1/2” socket / ratchet

-3/8 open face wrench

1)Install fl ex liner into existing chimney as per liner manufacturer’s specifi cations. See diagram 1.

2)Install the required fl ue adaptor onto the end of the fl ex liner. Secure the adaptor using 3 screws - 1 on the front, left and right side as shown in diagram 2.

Alignment of the fl ue adaptor can be critical during the install, it is recommended that the fl ex liner be left as compressed as possible. Before inserting the unit the adaptor should hang, when level, slightly above the required height.

3)Install the unit by fi rst setting the rear of the unit into the fi replace. See diagram 3. Ensure that the unit is centered in the existing fi replace and lined up with the fl ue adaptor.

Diagram 3

4)Slide the unit back until the fl ue adaptor is slightly engaged.

5) At this point it is recommended to level the unit and ensure that the leveling bolts rest on the surface of the fi replace. This will keep the adaptor from binding as the unit is slid into position.

6)Insert the provided pull rod through the hole in the top center of the unit. Secure the threaded end into the fl ue adaptor as shown in diagram 4. While sliding the unit into place pull on the rod to ensure that the fl ue adaptor is properly engaged. See diagram 5.

7)Ensure that the unit is still level.

8)To complete the installation and to ensure a secure fi t and connection of the fl ue adaptor to the insert, it is essential that the two bolts, fl at washers and lock washers (supplied with packaged manual) be installed and tightened using a 1/2" socket as shown in diagram 6. This prevents the possibility of creosote drip and exhaust gas leakage.

Diagram 6

9)Remove the pull rod from the top center of the fi replace. See diagram 7.

Diagram 1

Flex Liner

Flue Adaptor

Diagram 2

Secure adaptor using 3 screws - 1 in the front and 1 each on the left and right side.

Pull Rod

Diagram 7

NOTE: The pull rod should not be thrown away. It should be kept if the stove is ever needed to be removed from the fireplace.

Diagram 4

Pull Rod

10) Re-install the door if removed prior to

 

 

installation.

Pull Rod In Place

Diagram 5

I1200 Regency Wood Insert

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 918-665a 07/12/07 Wood InsertRegency Fireplace Product Table of Contents Safety Label I1200Regency Wood Insert With Standard Flue Adaptor Unit DimensionsWith Offset Flue Adaptor Before Installing Your Insert InstallationChimney Specifications Fireplace Specifications203mm Masonry and Factory Built Fireplace ClearancesBtu Hrft 2 = Btuinch Hrft 3Re-install the door if removed prior to Installing Your InsertInstallation Diagram I1200 Regency Wood InsertInstallation Into a Factory Built Fireplace Positive Flue Direct Flue Connection With Cleanout3a Full Flue Liner No Cleanout Required Regular/Oversize Faceplate Installation Regular/Oversize Faceplate Trim Installation Completed Faceplate Assembly FAN / Blower Draft Control First Fire Screen DoorOperating Instructions Some Safety GuidelinesFAN Operation ASH DisposalMaintenance Parts List Main AssemblyGrommet Strain Relief 171-920 Faceplate & Trim Set Regular Black FaceplatesFirebrick I1200 Regency Wood Insert Warranty Lifetime WarrantyInstaller Please complete the following information

I1200S specifications

The Regency I1200S is a remarkable addition to the world of portable radios, combining advanced technology with user-friendly features designed for both casual listeners and audio enthusiasts. This model exemplifies Regency's commitment to quality, performance, and innovation in communication devices.

One of the standout features of the Regency I1200S is its impressive reception capabilities. Thanks to an advanced DSP (Digital Signal Processing) technology, users can enjoy crystal-clear sound quality across a wide range of frequencies. This technology helps in minimizing static and distortion, ensuring that every transmission is crisp and easy to understand.

The I1200S is designed for versatility, supporting multiple bands including AM, FM, and shortwave. This broad coverage allows users to tune into their favorite local stations or explore international broadcasts, making it an ideal companion for travelers and radio enthusiasts alike. The inclusion of a digital display enhances usability, providing clear information on frequency and signal strength.

Another key characteristic of the Regency I1200S is its durability. Constructed with high-quality materials, it is built to withstand the rigors of travel and outdoor use. The lightweight design and compact size make it easy to carry, while the ergonomic controls ensure that users can operate the device without hassle, even in challenging conditions.

Battery life is another critical aspect where the I1200S excels. The radio is equipped with an efficient power management system that allows for extended usage on either rechargeable or disposable batteries. This feature is particularly beneficial for outdoor enthusiasts who may be away from power sources for extended periods.

Moreover, the I1200S includes practical features such as a headphone jack for private listening and a built-in speaker for group enjoyment. The intuitive controls allow users to easily switch between modes, adjust volume, and navigate through channels without confusion.

In summary, the Regency I1200S stands out as a top-tier portable radio, merging advanced technologies with practical features. Its robust reception, user-friendly design, and durability make it an exceptional choice for anyone looking to enjoy high-quality audio and reliable communication, whether at home, on the road, or in nature.
Top Page Image Contents