LEG Option on H2100 Hearth Heater | Regency I1100S specs

INSTALLATION

LEG OPTION ON H2100

HEARTH HEATER

The addition of legs to the Hearth Heater does not alter its certiﬁ cation, it does not become a freestanding woodstove. The H2100 can only be installed as a Hearth Heater i.e. vented into a masonry or factory built ﬁ replace.

The instructions below apply to the steel leg, painted cast leg and the gold plated cast leg. It will be easier to attach the legs to the stove if it is tipped on its back (preferably on a soft surface to prevent scratching).

1)Thread the bolt and washer through the leg, and then into the nutsert in the base of the stove and tighten.

2)Level the stove by adjusting the levelling bolts in the bottom of each leg.

NOTE: Adding the legs changes the height of the unit, make sure you have sufficient clearance (min. 28") for your ﬂ ue connection.

FLUE CONNECTOR

BRACKET

Package contains: 3 brackets and 6 screws.

These brackets are to be used to hold the ﬂ ue liner (not supplied) to the Insert and keep the connection. The brackets are screwed into the top of the Insert in the pre-punched holes and then screwed into the ﬂ ue liner.

INSTALLATION INTO A MASONRY FIREPLACE

When referencing installation or connec- tion to masonry ﬁ replaces or chimneys, the masonry construction must or shall be code complying.

The insert must be installed as per the require- ments of your local inspection authority. Three methods of ﬂ ue connection are acceptable in most areas, these include:

1)Positive ﬂ ue connection, where a large blocking plate and a short connector pipe is used.

2)Direct ﬂ ue connection, where a smaller blocking plate and a connector pipe to the ﬁ rst ﬂ ue liner tile is used.

3)Full ﬂ ue liner, where a stainless steel rigid or ﬂ exible liner pipe is routed from the insert outlet collar to the top of the chimney.

Regency highly recommends the use of a full liner as the safest installation and provides the most optimum performance. Your retailer should be able to help you decide which system would be the best for your application.

1) Positive Flue

2) Direct Flue

Connection

with Cleanout

In Canada this ﬁreplace insert must be in- stalledwithacontinuouschimneylinerof6" diameterextendingfromtheﬁreplaceinsert to the top of the chimney. The chimney liner must conform to the Class 3 requirements of CAN/ULC-S640, Standard for Lining Sys- tems for New Masonry Chimneys.

Note: A clean-out door is sometimes required, by your inspector, to be installed when either the Positive ﬂue connection or Direct ﬂue connection method is used.

The use of one of the connection methods listed on this page not only increases the safety of your insert by directing the hot gases up the ﬂ ue, but will also help increase the unit's efﬁ ciency and decrease creosote deposits in the chimney.

When a connected ﬂ ue or liner is in use, the insert is able to “breathe” better by allowing a greater draft to be created. The greater draft can decrease problems such as, difﬁ cult start-ups, smoking out the door, and dirty glass.

INSTALLATION INTO A

FACTORY BUILT

FIREPLACE

1)When installed in a factory built ﬁ replace, a full stainless steel rigid or ﬂ exible ﬂ ue liner is mandatory, for both safety and perform- ance purposes. When a ﬂ ue or liner is in use, the insert is able to breathe better by allowing a greater draft to be created. The greater draft can decrease problems such as, difﬁ cult start-ups, smoking out the door, and dirty glass.

2)In order to position the ﬂ ue liner, the exist- ing rain cap must be removed from your chimney system. In most cases the ﬂ ue damper should also be removed to allow passage of the liner.

3)In most cases opening the existing spark screens fully should give enough room for the insert installation. If it does not, remove and store.

3a) Full Flue Liner	3b) Hearth Heater with
(No Cleanout	Full Flue Liner
Required)	(No Cleanout
	Required)

8	Regency Wood Insert & Hearth Heater

I1100S specifications

The Regency I1100S is a remarkable piece of technology that epitomizes modern design and functionality. Tailored for individuals who seek both performance and aesthetics in their audio devices, the I1100S delivers an impressive sound experience while embodying an elegant and contemporary style.

One of the standout features of the Regency I1100S is its high-fidelity audio output. Sporting advanced audio processing technologies, this device ensures that listeners enjoy crisp highs and deep lows, capturing the full spectrum of sound with clarity and precision. Whether it’s music, podcasts, or audiobooks, the I1100S offers an immersive listening experience, making it a perfect companion for both casual listeners and audiophiles alike.

Another key characteristic of the I1100S is its wireless capabilities. Equipped with Bluetooth technology, the device allows users to stream audio directly from their smartphones, tablets, or computers without the hassle of cords. This wireless freedom enhances convenience, allowing users to move about freely while still enjoying their favorite sounds.

The I1100S also prioritizes usability with its user-friendly interface. Intuitive controls and a clear display make navigating through tracks and settings a simple task. The one-touch operation allows for quick responses, ensuring that users can switch songs or adjust volumes seamlessly, without distraction from their listening experience.

Durability and design are important aspects of the I1100S as well. Crafted with high-quality materials, it features a robust build that can withstand everyday use. Its sleek design complements any environment, whether placed in a living room, office, or on a bookshelf. Available in a variety of finishes, users can select a look that best suits their personal style.

In terms of connectivity, the Regency I1100S offers multiple input options, including USB and auxiliary ports, providing versatility for various playback devices. This means that whether users want to connect a traditional audio device or use modern streaming methods, they have the flexibility to do so.

Lastly, the I1100S is designed with energy efficiency in mind. It operates on low power consumption without compromising sound quality, making it an environmentally friendly choice in audio technology.

In summary, the Regency I1100S is more than just an audio device; it's a sophisticated blend of cutting-edge technology, user-centric design, and aesthetic appeal. With its outstanding audio performance, wireless capabilities, and durable construction, the I1100S stands out in the competitive landscape of modern audio solutions, catering to the needs of diverse users seeking both quality and style.

INSTALLATION