Lighting instructions 7200DERN gas valve

GOLD GV Ser. 3 — User’s information manual

Lighting instructions — 7200DERN gas valve

Before attempting to start the boiler, check the boiler pressure temperature gauge. If boiler and system are full of water and properly pressurized, the gauge should read at least 12 psig on most systems. Operating the boiler without proper water content will damage boiler and controls and could result in severe personal injury, death or substantial property damage.

FOR YOUR SAFETY READ BEFORE OPERATING

If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

A.This appliance does not have a pilot. It is equipped with an ignition device which automatically lights the burner. Do not try to light the burner by hand.

B.Before OPERATING, smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor. See below.

C.Use only your hand to depress and move Selector arm on gas valve. Never use tools. If the arm will not depress or move by hand, don't try to repair it, call a qualified service technician. Force or attempted repair may result in a fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control, which has been under water.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electric switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.

•If you cannot reach your gas supplier, call the fire department.

OPERATING INSTRUCTIONS

1.STOP! Read the safety information above on this label.

2.Set the thermostat to lowest setting.

3.Turn off all electrical power to the appliance.

4.Remove jacket top panel.

5.This appliance is equipped with an ignition device which automatically lights the burner. Do not try to light the burner by hand.

6.Depress Selector arm slightly and move left to OFF.

7.Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow "B" in the safety information above. If you don't smell gas, go to the next step.

8.Depress Selector arm slightly and move right to ON.

9.Turn on all electric power to the appliance.

10.Set thermostat to desired setting.

11.If the appliance will not operate, follow the instructions "TO TURN OFF GAS TO APPLIANCE" below and call your service technician or gas supplier.

12.Replace jacket top panel.

Robertshaw gas valve model 7200DERN

Selector arm

85020

NOTE: Selector arm cannot be moved to OFF unless arm is pushed in slightly. DO NOT force.

TO TURN OFF GAS TO THE APPLIANCE

1.Set the thermostat to lowest setting.

2.Turn off all electric power to the appliance if service is to be performed.

3.Remove jacket top panel.

4.Depress Selector arm slightly and move left to OFF. Do not force.

5.Replace jacket top panel.

12	Part number 550-141-812/0699

3 Series specifications

The Weil-McLain 3 Series is a highly regarded line of cast iron boilers known for their reliability, efficiency, and ease of installation. Designed to provide optimal heating solutions for residential and light commercial applications, the 3 Series is built to meet the demands of any heating challenge while ensuring long-lasting performance.

One of the standout features of the Weil-McLain 3 Series is its robust construction. The boiler is crafted from high-quality cast iron, which enhances durability and heat retention. This material not only extends the lifespan of the boiler but also improves overall efficiency, making it an excellent investment for homeowners seeking to improve their heating systems.

The 3 Series boasts an advanced design that emphasizes efficiency. With an AFUE (Annual Fuel Utilization Efficiency) rating of up to 84%, the boiler operates at a level that helps to reduce energy bills while maintaining a comfortable indoor environment. This energy efficiency is complemented by the boiler's ability to adapt to various heating demands, offering consistent warmth even during the coldest months.

Another significant aspect of the Weil-McLain 3 Series is its user-friendly interface. The series features intuitive controls that simplify the operation of the boiler. This ease of use extends to maintenance and serviceability, with accessible components that make it straightforward for technicians to perform regular upkeep and repairs.

The 3 Series is also equipped with innovative technology that enhances its performance. This includes the option for modulating burners, which allow the boiler to adjust its output based on the current heating needs of the space. This means less energy is wasted, leading to further cost savings for the user.

In terms of size and installation, the Weil-McLain 3 Series caters to a variety of configurations. It comes in multiple sizes and has a compact design that allows it to fit seamlessly into different environments. Whether you are upgrading an existing system or installing a new one, the 3 Series provides versatility that meets diverse heating requirements.

In summary, the Weil-McLain 3 Series is a powerful and reliable boiler choice, distinguished by its durable construction, efficiency, user-friendly features, and innovative technologies. It delivers dependable performance for those seeking a heating solution that optimizes comfort while promoting energy savings. The 3 Series stands out as a trusted choice for homeowners and businesses alike, ensuring consistent heating that meets the demands of modern life.