Using your Bluetooth headset with the Logitech wireless hub
I have disconnected my headset and now my speakers don’t work
This may be because the Windows® sound and audio properties have not switched back from Bluetooth® audio to your sound card. (This should happen automatically when you disconnect or unpair your headset.)
To check this, follow these steps:
1.At the Windows® Control Panel, select Sounds and Audio Devices (Windows® XP) or Sounds and Multimedia (Windows® 2000).
2.Go to the Audio tab and check that your sound card is selected in both the Sound playback and Sound recording panels. If it is not, select your sound card in both lists.
3.(Windows® XP only.) Go to the Voice tab and check that your sound card is selected in both the Voice playback and Voice recording panels. If it isn’t, select your sound card in both places.
4.Click OK to save any changes made and close the dialog.
I have disconnected my Logitech headset from the Bluetooth wireless hub and now my mobile phone can’t see it
Early releases of the Logitech headset do not support multiple pairing. This means that if you pair your headset with a new Bluetooth® device (such as your computer), your previous pairing (such as that with your mobile phone), is lost.
The solution is to pair your Logitech headset with your mobile phone again.
© 2003 Logitech, Inc. | 24 |