Pella V981553 installation instructions Cleaning Instructions, Important Notice

Page 9

CLEANING INSTRUCTIONS

Remove labels and clean the glass, using a soft, clean, grit-free cloth and mild soap or detergent. Be sure to remove all liquid by wiping dry or use a clean squeegee. The vinyl frame may be cleaned as described above. For stubborn dirt, a “non-abrasive" cleaner such as Bon-Ami®or Soft Scrub® may be used. Do not use solvents such as mineral spirits, toluene, xylene, naphtha or muriatic acid as they can dull the finish, soften the vinyl and/or cause failure of the insulated unit seal. Keep door tracks clear of dirt and debris. Keep weep holes open and clear of obstructions.

IMPORTANT NOTICE

Because all construction must anticipate some water infiltration, it is important that the wall system be designed and constructed to properly manage moisture. Pella Corporation is not responsible for claims or damages caused by anticipated and unanticipated water infiltration; deficiencies in building design, construction and maintenance; failure to install Pella products in accordance with Pella's installation instructions; or the use of Pella products in wall systems which do not allow for proper management of moisture within the wall systems. The determination of the suitability of all building components, including the use of Pella products, as well as the design and installation of allow for proper management of moisture within the wall systems. The determination of the suitability of

all building components, including the use of Pella products, as well as the design and installation of flashing and sealing systems are the responsibility of the Buyer or User, the architect, contractor, installer, or other construction professional and are not the responsibility of Pella.

Pella products should not be used in barrier wall systems which do not allow for proper management of moisture within the wall systems, such as barrier Exterior Insulation and Finish Systems, (EIFS) (also known as synthetic stucco) or other non-water managed systems. Except in the states of California, New Mexico, Arizona, Nevada, Utah, and Colorado, Pella makes no warranty of any kind on and assumes no responsibility for Pella windows and doors installed in barrier wall systems. In the states listed above, the installation of Pella Products in barrier wall or similar systems must be in accordance with Pella's installation instructions.

Product modifications that are not approved by Pella Corporation will void the Limited Warranty.

Page 8 Page 9
Image 9
Page 8 Page 9
Contents Vinyl Windows and Doors Cut the water resistive barrier 1C Rough Opening PreparationFold the water resistive barrier 1D. Fold side flaps into Tab the sill flashing tape and fold. Cut 1 wide tabs at eachSetting and Fastening the Door Prepare the Door for InstallationFasten the door to opening Integrating the Door to the Water Resistive BarrierReinstall the Sliding Panel Interior Seal Sealing the Door to the Exterior Wall CladdingApply insulating foam sealant. From the interior, insert Insert closed cell foam backer rod into the space around Installation Instructions Bottom FIN RemovalInstructions Reversing Door Slide Rotate the handle 180 and install the door handle byRemove the sill and screen tracks from the door Remove the door handle by removing the twoImportant Notice Cleaning Instructions

V981553 specifications

The Pella V981553 is a premium window offering that combines innovative design with advanced technologies to enhance both aesthetic appeal and energy efficiency. This window model is part of Pella's renowned product line, known for its durability, style, and environmental performance.

One of the standout features of the Pella V981553 is its exclusive InsulShield technology. This advanced glass option significantly reduces heat transfer, ensuring that homes remain comfortable regardless of the weather outside. The technology utilizes multiple panes of glass, along with gas fills like argon or krypton, to create an effective thermal barrier. This not only enhances comfort but also helps homeowners save on energy bills.

In terms of design, the Pella V981553 is highly customizable. Homeowners can choose from a variety of styles, colors, and finishes to complement their home’s architecture. The window is available in different grid patterns and configurations, allowing for personalized aesthetics that suit any design preference. Additionally, Pella provides options for decorative glass, which can add a unique touch while maintaining privacy.

Durability is another hallmark of the V981553 model. It features constructed frames made from high-quality materials that resist warping, fading, and cracking. The window’s exterior is often coated with a protective finish that enhances longevity and reduces maintenance needs, allowing homeowners to enjoy their investment without the hassle of frequent upkeep.

The Pella V981553 also prioritizes security, employing robust locking mechanisms that provide peace of mind. The use of laminated glass further enhances safety by reducing the likelihood of breakage.

Installation of the Pella V981553 is designed to be user-friendly. Pella’s windows come with pre-drilled frames, which simplifies the process for builders and homeowners alike. The product is engineered to fit standard openings, minimizing the need for extensive modifications during installation.

Overall, the Pella V981553 exemplifies a commitment to quality, innovation, and style. With its energy-efficient features, customizable options, and robust construction, it is a smart choice for homeowners looking to enhance their living spaces while adhering to modern standards of performance and aesthetics. Whether for new builds or renovations, the Pella V981553 is a testament to Pella’s dedication to superior craftsmanship.
Top Page Image Contents