Mounting the Thermostat, Installation | Pecoware TC170 instruction

TC170 THERMOSTAT

▲! WARNING

•READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THIS THERMOSTAT.

•Failure to observe safety information and comply with instruc- tions could result in PERSONAL INJURY, DEATH AND/OR PROPERTY DAMAGE.

•To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use only wiring with insulation rated for full thermostat operating voltage.

•Before installing this control, the Voltage Selection Switch must be placed in the correct position. See instructions.

•To avoid potential fire and/or explosion do not use in potentially flammable or explosive atmospheres.

•Retain these instructions for future reference. This product, when installed, will be part of an engineered system whose specifications and performance characteristics are not designed or controlled by PECO. You must review your application and national and local codes to assure that your installation will be functional and safe.

CAUTION

•Use copper wire only, insulate or wire nut all unused leads.

•Care should be used to avoid electrostatic discharge to the T170 thermostat.

•This unit has configuration jumpers. You may need to reconfigure this thermostat for your application. See page 3.

MOUNTING THE THERMOSTAT

Thermostat mounts to a 4x4 box with a 2x4 mud ring.

CAUTION

All wiring connections must be made inside the electric box or the T170 maybe damaged.

2x4 Mud Ring

Cover Locking Snaps

(Both Sides)

T170 Base

T170 Cover Assembly

INSTALLATION

1.This thermostat is a 24 VAC only control. Leave the Voltage Selec- tion Switch in the 24 VAC position for proper operation. Failure to select the correct voltage will result in thermostat malfunction or perma- nent thermostat damage.

2.Connect wires using the wiring diagram. Wire nut off all unused wires. All connections must be located in the outlet box.

3.Install the T170 base with the two furnished mounting screws to

a standard 4 x 4 x 2-1/8” square device box with a 2” x 4” mud ring mounted horizontally. Tighten the screws evenly but do not over tighten. 4. To use a remote sensor on units with local sensing capability, remove jumper JP-1 to disable local sensing. Failure to remove JP-1 will cause improper operation of the thermostat with a remote probe installed.

5.Verify that the circuit board is firmly snapped into the cover and has not been dislodged during handling.

6.Install the cover assembly. Press firmly to engage the cover locking snaps.

7.Checkout: After wiring and installation is complete, energize the system. Set fan to ON. Set the system button to AUTO, or available selection. Using the UP arrow, adjust temperature above the ambient temperature to cycle heating stage(s) on. Using the DOWN arrow adjust the temperature below ambient temperature to cycle cooling stage(s) on.

TYPICAL OPERATION

System Button Operation

OFF	All thermostat outputs are off.
AUTO	The thermostat automatically selects heating or cooling mode
	depending upon the set point and room temperature. The ap-
	propriate HEAT or COOL icon are illuminated if demand exists.
	A 3°F dead-band is provided to prevent short cycling between
	heating and cooling modes. After changeover, the control point
	automatically shifts so that the control off point equals the set
	point temperature.
COOL	The thermostat operates as a cooling only thermostat.
HEAT	The thermostat operates as a heating only thermostat.

Up/Down Arrow Button Operation

Up/Down arrows increased or decreased temperature.

Fan Button Operation

In ON the fan output is continuous. In AUTO the output cycles with demand. Some models are available with Controlled Off and or Staged Fan.

F/C Button Operation

This button toggles from Fahrenheit to Celsius.

Speed Button Operation

Some models have a Speed button instead of a F/C button. Fan speed is determined by manual selection of HI or LO. Holding this button in for 5 seconds will toggle the displayed temperature from Fahrenheit to Celsius.

P/N 69289 3220-2083 REV 0 PAGE 1

TC170 specifications

Pecoware TC170 is an innovative touch computer designed for various industrial applications, offering robust features and cutting-edge technology to meet the demands of modern businesses. With a focus on durability, performance, and user-friendly interfaces, the TC170 stands out in the market as a reliable solution for various operational needs.

One of the main features of the Pecoware TC170 is its impressive touchscreen display. The device comes equipped with a 17-inch high-resolution display that provides excellent visibility, even in challenging lighting conditions. This makes it ideal for environments such as factories and warehouses where bright lights or glare might interfere with visibility. The touchscreen is designed for ease of use, supporting multi-touch functionality for a more intuitive user experience.

The TC170 is built on a powerful processor platform, ensuring fast response times and efficient multitasking. It typically features an Intel Celeron or Core i-series processor, allowing it to handle various applications seamlessly. This performance is further complemented by ample RAM options, which enable the device to run multiple applications without compromising speed or efficiency.

In terms of connectivity, the Pecoware TC170 excels with multiple ports, including USB, Ethernet, and serial connections, allowing easy integration with various peripherals and automation systems. This versatility makes it suitable for different sectors, including manufacturing, logistics, and retail.

Durability is another defining characteristic of the TC170. It is designed to withstand the rigors of industrial environments, featuring a rugged chassis and IP-rated protection against dust and water. This resilience ensures that the device can operate reliably in harsh conditions, minimizing downtime and maintenance costs.

Additionally, the TC170 supports various operating systems, including Windows and Linux, providing flexibility for businesses to choose the software that best meets their operational needs. This adaptability is crucial in a rapidly evolving technological landscape, allowing organizations to stay competitive.

With its blend of technology, durability, and functionality, the Pecoware TC170 is an ideal solution for businesses looking to enhance productivity and streamline operations. Its user-friendly design, coupled with robust performance features, positions it as a frontrunner in the touch computer market. Whether for data entry, inventory management, or real-time processing, the TC170 is designed to meet the diverse needs of modern enterprises, making it a valuable investment for the future.