Extended Shutdown, Terms Used | Nortec Industries None instruction

dependent on water supply conditions and humidifier usage. Failure to replace the cylinder at the end of cylinder life may result in unit damage. NORTEC is not responsible for any damages resulting from, or attributable to, the failure to replace a used cylinder (see Manufacturer’s Warranty).

REMOVING THE OLD CYLINDER

See Figure # 5.

1.Turn off the water supply to unit.

2.The old cylinder must be drained completely before removing. This is done by pushing the auto on/off/drain switch to the “drain” position.

3.When completely drained, push the auto on/off/drain switch to the “off” position.

4.Open the main disconnect during the entire cylinder change operation.

5.The power wires to the cylinder are attached by cylinder plugs to the electrode pins on top of the cylinder. Pull these plugs vertically off the pins. See Figure # 5.

6.Using slot screwdriver, loosen the steam hose clamp(s) and pull steam hose off vertically.

7.The cylinder is now ready to be lifted out of the unit.

Figure #6

Plugs

White	Sensor Pin	1Ø
Sensor Plug	Sensor Pin	1Ø
Sensor Plug

Cylinder

Plug

Cylinder Pin	Cylinder Pin
	Sensor Pin

3Ø

Cylinder Pin	Cylinder Pin

Cylinder Pin

INSTALLING THE NEW CYLINDER

1.The reverse procedure should be followed to install a new cylinder. The main disconnect is to be left open until the cylinder is completely installed and reconnected.

2.Ensure that the cylinder mounting stubs are seated properly in the allotted side mounting slots within the unit.

3.The white sensor plug on all units is for the sensor pin, which always goes on the single pin offset from the others. See Figure # 6.

4.Ensure that cylinder plugs are very snug on the pins.

5.Replace loose fitting plugs, loose plugs may generate enough heat to melt and destroy the plug and new cylinder plugs must be ordered.

MAINTENANCE

WARNING! The plumbing and electrical compartments contain high voltage components and wiring. The access cover is attached with screws. Access should be limited to authorized personnel only.

EXTENDED SHUTDOWN

Before disconnecting power to the humidifier for a period of extended shutdown, ALWAYS DRAIN the cylinder first. Otherwise, the electrodes are subject to harmful corrosion which drastically shortens the cylinder life. Do NOT leave the switch in the DRAIN position indefinitely as the drain coil could burn out. Leave the switch in the OFF position and “open” the main external fused disconnect to stop power to the humidifier. Close the shut off valve in the water supply line feeding the humidifier.

TROUBLESHOOTING

TERMS USED

F.L.A. (Full Load Amps): Refers to amps listed on the humidifier specification label.

SHORT CYCLING: When the ‘on time’ of the humidifier is less than ten minutes upon a call for humidity. To correct short cycling, all humidifiers have a capacity adjustment which allows the output of the humidifier to be reduced to as low as 20% of rated output, thus extending the ‘on time’ required to maintain output.

- 4 -

None specifications

Nortec Industries is a well-established company renowned for its innovative approach and commitment to quality in the manufacturing sector. characterized by a diverse portfolio of products that cater to various industries, Nortec Industries has become a leader in technology-driven solutions. The company specializes in creating advanced equipment and systems primarily for the energy, environmental, and telecommunications sectors.

One of the main features of Nortec Industries is its state-of-the-art manufacturing facilities, equipped with cutting-edge technology and automation systems. These facilities allow for high-speed production while ensuring precision and efficiency in every product. By using technologies such as Computer Numerical Control (CNC) machining and laser cutting, Nortec is able to achieve intricate designs and maintain strict quality control standards.

Nortec Industries prides itself on its commitment to sustainability and eco-friendly practices. The company actively integrates green technologies into its manufacturing processes. This includes the use of recyclable materials, energy-efficient machinery, and waste reduction strategies that minimize the environmental impact of production. Their ability to provide eco-conscious solutions aligns with the global shift towards sustainability, making them a preferred partner for organizations looking to reduce their carbon footprint.

Another significant characteristic of Nortec Industries is its emphasis on research and development. The company invests heavily in R&D to stay ahead of industry trends and respond to market demands promptly. This innovation-driven approach enables Nortec to develop new products and technologies that improve performance and user experience, offering clients an edge over competitors.

Nortec's product range includes advanced automation systems, control panels, and monitoring technologies that enhance operational efficiency for businesses. Their solutions are highly customizable, allowing clients to tailor systems to their specific needs, further exemplifying Nortec’s dedication to customer service and satisfaction.

In conclusion, Nortec Industries stands out in the manufacturing world due to its innovative technologies, commitment to sustainability, and focus on customer-centric solutions. Their continuous pursuit of excellence and adaptation to industry changes positions them as a leader, ready to tackle future challenges and maintain impactful partnerships across multiple sectors.