Nortec Steam Humidifiers Installation, Receiving & Unpacking Equipment, Humidifier Configuration

Page 4

INSTALLATION

RECEIVING & UNPACKING EQUIPMENT

1.Check packing slip to ensure ALL material has been delivered.

2.All material shortages are to be reported to NORTEC within 48 hours from receipt of goods. NORTEC assumes no responsibility for any material shortages beyond this period.

3.Inspect shipping boxes for damage and note on shipping waybill accordingly.

4.After unpacking, inspect equipment for damage and if damage is found, notify the shipper promptly.

5.All NORTEC products are shipped on an F.O.B. factory basis. Any and all damage, breakage or loss claims are to be made directly to the shipping company.

PRE-INSTALLATION CHECKPOINT

1.Ensure that available voltage and phase corresponds with humidifier voltage and phase as indicated on humidifier’s nameplate label.

2.Ensure that the dedicated external disconnect switch is of sufficient size to handle the rated amps as indicated on the nameplate label. Refer to local codes.

3.Report any discrepancy immediately.

Figure #1

RESDELUX Series Humidifier

Condensate

Return

Steam

Outlet

Nameplate

Label

 

 

PowerAnd

 

 

Control

Drain

Wiring

Water

Supply

HUMIDIFIER CONFIGURATION

To avoid any danger, never operate the humidifier with a door off.

To open the door, use the key to unlock, lift door up slightly and pull door forward.

LOCATION & MOUNTING

HUMIDIFIERS

RESDELUX Series humidifiers are designed to mount on a suitable wall or vertical surface. Do not sit on the floor due to additional clearances required for plumbing, electrical, and control access holes. The clearance dimensions shown in this manual are for reference only and are the minimum required for maintenance of the humidifier. Local and National Codes should be consulted prior to final location and installation of the humidifier. NORTEC does not accept responsibility for installation code violations.

1.Location of the humidifier should be below and as close as possible to the steam distributor location or blower pack. Net output will be reduced as a result of heat loss through long steam hose.

2.See Figure #2 for front clearance requirements for access during installation, maintenance and troubleshooting.

Figure #2

Clearance Requirements

Wall

NOTE: Local and national

 

 

 

Min. 36"

codes may deviate. Please

Frontal

consult applicable codes

Clearance

for clearance requirements

 

 

 

 

 

 

 

 

 

 

 

3.Where possible, mount humidifier at a height convenient for servicing.

4.To mount the humidifier use two #8 screws, 2” long, and secure into a standard 2”X4” wood stud or equivalent structure.

5.Make sure humidifier is level.

- 1 -

Image 4
Contents Installation, Operation Maintenance Troubleshooting Guide Table Of Contents Page Installation PRE-INSTALLATION CheckpointHumidifier Configuration Receiving & Unpacking EquipmentSteam Distributor Nozzle in duct location MinSteam Hose Installation Condensate Hose suppliedBlower Pack Connection Cabinet Mounting of the Blower PackRemote Mounting of the Blower Pack Table #1 Clearances of Remote Mounted Blower PackWater Supply Line PlumbingDrain Line LOW Voltage Control Wiring and Installation Control WiringElectrical Electrical Requirements for Permanently Connected ResdeluxControl Installation OperationIntroduction Resdelux OperationMaintenance Manual Capacity AdjustmentWhen to Replace the Steam Cylinder Steam CylinderHOW to Remove the Steam Cylinder HOW to Install the Replacement CylinderMandatory Cleaning of the Drain Valve Extended ShutdownTroubleshooting Diagnostic Procedures TroubleshootingProcedures and Terms Used Diagnosing L1 N Transformer Spare Parts List and Exploded View Resdelux Item Number Part Number Description21a 21b 21c 13a 13d 13e 13b 13c 11b 11a 12 12a 14a Periodic Maintenance Checklist Inspect, Check, Clean, and Adjust all items listedLimited Warranty MTH/DAY/YR

Steam Humidifiers specifications

Nortec Steam Humidifiers are recognized for their robust performance and reliability in providing precise humidity control for various applications. These advanced humidification systems utilize state-of-the-art technology to ensure optimal indoor air quality in commercial, industrial, and institutional environments. One of the standout features of Nortec Steam Humidifiers is their ability to produce high-quality steam through an efficient and consistent process.

The humidifiers employ a direct steam generation method, which allows for rapid humidity delivery and precise control over output levels. This is particularly beneficial in settings such as hospitals, laboratories, and manufacturing facilities, where specific humidity levels are critical for operational success. The steam produced is free from impurities and is ideal for various applications, including protecting sensitive equipment, preserving materials, and enhancing comfort for occupants.

Another notable characteristic of these humidifiers is their compact design. Nortec Steam Humidifiers are engineered to occupy minimal space while maintaining high productivity. Furthermore, they are equipped with advanced controls and monitoring systems that enable users to customize settings according to their specific needs. This includes options for modulating steam output according to the changing requirements of the environment.

The humidifiers also feature a user-friendly interface, allowing for easy adjustment and monitoring of system performance. High-precision sensors measure humidity levels accurately, ensuring that the output is consistently matched to the desired set point. Nortec Steam Humidifiers are designed with energy efficiency in mind, using innovative technologies to minimize energy consumption while maximizing steam output.

In terms of maintenance, Nortec provides easy access to key components, ensuring that routine checks and servicing can be completed efficiently. The use of advanced materials in the construction of humidifiers contributes to their durability and long operational lifespan. Integration with building management systems is also possible, allowing for seamless operation within a larger environmental control strategy.

In summary, Nortec Steam Humidifiers stand out in the market due to their innovative technologies, precise humidity control, energy efficiency, and ease of maintenance. These features make them an ideal choice for a wide array of humidification needs, ensuring excellent air quality and comfort in any setting. With their commitment to quality and reliability, Nortec continues to be a leader in the humidification industry.