Nilfisk-ALTO ATTIX 791-2M/B1 Replacing the waste bag, Replacing the filter bag

Page 11

7.2.2Replacing the waste bag

Only after picking up nonhazardous dust or dust with MAC values >1 mg/m³.

7.2.3 Replacing the filter bag

During the following work, en- sure that dust is not unnecessarily spread around. Wear a P2 breath- ing mask.

 

2

1

1

3

1

ATTIX 791-2M/B1

1.Remove the upper section of cleaner from the dirt tank.

2.Open the retaining clamps

(1) and remove the interme- diate ring (2) from the tank.

3.Close the waste bag using the cable binder (3).

4.Dispose of the dirt in accord- ance with legal regulations.

5.Insert a new filter bag into the cleaned tank as described in the instructions enclosed.

1.Open the retaining clamps and remove the upper section of the cleaner from the dirt tank.

2.Carefully remove the filter bag connection from the inlet fitting.

3.Close the filter bag connection with the slide.

4.Dispose of the filter bag in ac- cordance with legal regulations.

5.Place a new filter bag into the cleaned tank as described in the instructions (printed on the filter bag)

IMPORTANT: Press the filter bag connection on the inlet fit- ting as far as possible.

7.2.4 Emptying the dirt tank

Only after picking up harmless dust with- out a filter bag.

To empty the dirt tank after picking up liquids: remove

the intermediate ring as a proper seal is only ensured during suction. After emptying the tank: clean the rim of the tank and the seals in the intermediate ring and the upper section of cleaner before refitting them.

If the seal or groove is dirty or dam- aged, the suction performance will be reduced.

Before reinserting the suction hose: clean the inlet fitting and hose col- lar.

 

2

1

1

 

3

1.Remove the upper section of cleaner from the dirt tank.

2.Open the retaining clamps

(1)and remove the interme- diate ring (2) from the tank.

3.Pull the lever in the handle

(3)upwards and tilt the tank.

4.Tip out the collected dirt.

5.Dispose of the dirt in accord- ance with legal regulations.

or:

3.Open the tank locks (4).

4.Use the handles (5) to lift the tank out of the frame.

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 53-65 14-2627-39 40-52Attix 791-2M/B1 Contents Transport Important safety instructionsSymbols used to mark For your own safetyElectrical components Picking up liquidsRepair Maintenance, cleaningAccessories and spare parts Tool socketOperation DescriptionBefore start-up Switch position „auto Connecting electrical appliancesEnsure that the electrical appliance is switched off Switching on Vacuum cleaner 4.2.1 Switch positionPicking up liquids Do not pick up flammable substances Applications and techniquesAcoustic warning Attix 791-2M/B1 Type of dust Filter bag/waste bagAfter finishing work MaintenanceEmptying the dirt tank Replacing the waste bagReplacing the filter bag Replacing filter element Never use the vacuum cleaner without a filterFault Cause Remedy TroubleshootingTests and approvals CleanerGuarantee Further informationEC declaration of conformity Technical data Attix 791-2M/B1Accessories Thailand

ATTIX 791-2M/B1 specifications

The Nilfisk-ALTO ATTIX 791-2M/B1 is a robust and versatile vacuum cleaner designed for both commercial and industrial applications. This powerful machine is engineered to handle the toughest cleaning tasks while ensuring user comfort and efficiency. One of its standout features is the high-performance motor, providing exceptional suction power that enables it to tackle heavy debris and fine dust with ease.

Equipped with a large capacity tank of up to 70 liters, the ATTIX 791-2M/B1 minimizes downtime by allowing for extended use before needing a disposal or emptying. Its innovative two-stage filtration system, including a HEPA filter option, guarantees the capture of even the smallest particles, including allergens and hazardous materials, making it ideal for environments that require high levels of cleanliness, such as construction sites and workshops.

The machine's compact design facilitates maneuverability, while the integrated carrying handle and sturdy wheels enable easy transport across different surfaces. Additionally, the ATTIX 791-2M/B1 features a patented "Turbine Flow" technology that maximizes airflow while minimizing energy consumption. This allows operators to achieve efficient cleaning results without incurring high operating costs.

Safety and convenience are also key characteristics of this vacuum cleaner. The built-in electronic water stop feature prevents water damage to the motor, making it suitable for wet and dry applications. Furthermore, the machine is designed with user-friendly controls, allowing for easy adjustments and operation. The noise-reduction technology ensures a quieter working environment, enhancing comfort for both the operator and those in the vicinity.

The Nilfisk-ALTO ATTIX 791-2M/B1 also supports various accessory options and attachments, making it versatile for different cleaning tasks. Whether you’re dealing with construction debris, fine dust, or liquid spills, this vacuum cleaner is engineered to adapt to your needs. Its durability and reliability make it a trusted choice for professionals seeking a high-performance cleaning solution that meets the demands of various environments. Overall, the ATTIX 791-2M/B1 combines power, efficiency, and user-friendly features, earning its place as a leader in industrial vacuum technology.
Top Page Image Contents