Nilfisk-ALTO 91WS manual Battery Powered Machines

Page 7

MACHINE PREPARATION

C0605

FIGURE 2

BATTERY POWERED MACHINES

The battery powered machines may be shipped with the batteries and charger in separate containers. The batteries will need to be filled with electrolyte if batteries were shipped dry.

1.Uncrate the machine and carefully remove it from the skid to prevent damage.

2.Inspect the machine for obvious damage and check the controls for proper operation.

3.Connect and tighten battery cables. (See Figure 2)

4.Connect battery cables. Be sure to observe polarity. (See Figure 2)

5.Charge batteries using the quick disconnect provided. Leave the top cover open while charging to prevent build up of explosive gases generated during the charging process. Refer to the charging instructions provided in the manual and on the charging unit being used.

6.For safety, do not operate until you have read the safety precautions and operation instructions in the manual.

WARNING

Lead acid batteries generate gases which can cause an explosion. Make sure the switch on the charger is in the “OFF” position before connecting or disconnecting the charger. If no switch is provided, unplug the charger before making connections to the batteries. Keep sparks and flame away from batteries. NO SMOKING. Charge the batteries only in an area with good ventilation and leave the top cover open while charging.

WARNING

Batteries contain sulfuric acid which can cause burns to exposed skin or eyes. To prevent injury, wear protective clothing and safety glasses when working on batteries. In the event that acid comes in contact with skin or eyes, flush affected area with fresh water for a minimum of 5 minutes and get medical attention immediately.

1-6

American-Lincoln

 

91 WS

Page 6 Page 8
Image 7
Page 6 Page 8
Contents AMERICAN-LINCOLN Table of Contents American-Lincoln Specifications Sweeping System Machine DimensionsOptional Equipment Machine Preparation GAS/LP Powered MachinesMachine Preparation Battery Powered Machines Safety Precautions Safety PrecautionsSafety Precautions Machine Controls Machine Controls KEY SwitchHour Meter Machine Controls Filter Shaker SwitchSide Broom Lift Handle Main Broom AdjustmentMain Broom Lever Hopper Dump Handle Filter Manifold LatchFORWARD/REVERSE Control Handle Rewind Starter Circuit BreakersOperating Instructions Battery Machine OperationGAS/LP Machine Operation To Start LP Powered Sweeper Starting Instructions PRE-START ChecklistTo Start the Battery Powered Sweeper To Start GAS Powered SweeperTo Stop Sweeper To Drive Machine for TransportTo Sweep with Machine To Empty HopperBattery Charging Instructions Post Operation ChecklistTo Fill the Gasoline Powered Machine Fuel Tank Gasoline Powered Machine Fueling InstructionsLP Powered Machine Fueling Instructions To Change LP Tank Machine Storage Gasoline Powered MachinesService Chart 10,19 11,15 Sweeping Guidelines HOW to SweepSweeping Various Types of Debris Main Broom Service InstructionsMain Broom Service Instructions To Adjust the Main Broom Sweep HeightService Instructions To Check the Side Broom Sweep Pattern Side BroomsTo Change the Side Brooms Height AD- Justment To Change the Side Brooms Dust Control Service InstructionsTo Clean the Filter Baffle To Clean the Panel FilterTo Clean Hopper Flap Service InstructionsTo Adjust the Side Flaps Hopper Service InstructionsFuel Filter Service Engine AIR Intake ServiceTo Replace the Forward Drive Belt To Check the Engine OIL LevelTo Replace the Reverse Belt LP Safety Precautions LP GAS System LP GAS ComponentsLP Vapor Withdrawal System LP Fuel Tanks LP ChecklistTo Begin Changing the LP Tank LP Tank CareUSE and Care of LP Tanks Changing LP TanksStandard Metric Torque Values Standard Hardware & Torque ValuesDecimal Metric & Conversion Table SAE Grade Bolt IdentificationAbbreviations Screws Hardware Legend Hardware Legend Hardware Legend Hardware Legend Hardware Legend Screw, HHC M14 x 1.50 x 45mmgr10 Ordering Parts American Lincoln TechnologyAmerican-Lincoln Technology Table of Contents Chapter Part Number Description QTY Frame Parts ListHardware Used Frame Exploded View Covers Parts List Covers Exploded View Part Number Description Wheel Drive Parts ListWheel Drive Exploded View Lower Wheel Drive Parts List Lower Wheel Drive Exploded View Main Broom Parts List Main Broom Exploded View Main Broom Arms Parts List Main Broom Arms Exploded View Right Hand Side Broom Parts List Right Hand Side Broom Exploded View 13 H150Hopper Parts List Hopper Exploded View Filter Shaker Parts List Filter Shaker Exploded View Impeller Parts List Impeller -EXPLODED View Battery Parts List Battery Exploded View Service Parts Engine Parts ListEngine Exploded View Electrical Assembly Battery Parts List Electrical Assembly Battery Exploded View Back Wiring View TOPElectrical Assembly GAS Parts List M1 Relay Electrical Assembly GAS Exploded ViewControl Panel Battery Parts List Control Panel Battery Exploded View Control Panel GAS Parts List Control Panel GAS Exploded View Decals Parts List Decals Exploded View American-Lincoln Decals GAS Exploded View American-Lincoln Technology Table of Contents Chapter Left Hand Side Broom Option Parts List Left Hand Side Broom Option Exploded View LP Option Parts List LP Option Exploded View C0626 Foam Filled Tire OptionWET Sweep Bypass Option Spare Parts Kits Battery Machine Part Number DescriptionMain Broom Options TOP Back Wiring View Schematic & Connection Drawing BatteryOption Schematic & Connection Drawing GASIndex Index Index AMERICAN-LINCOLN

91WS specifications

The Nilfisk-ALTO 91WS is a state-of-the-art waste water vacuum system, designed to tackle both outdoor and indoor cleaning tasks across various industries. This versatile machine is particularly renowned for its impressive suction power, allowing for the effective removal of liquid waste, sludge, and debris in less time and with minimal effort.

One of the key features of the 91WS is its robust construction. Designed with durability in mind, the vacuum has a sturdy chassis and components that are resistant to wear and tear, making it ideal for demanding environments such as construction sites and heavy industry. The unit is also equipped with large wheels, ensuring ease of mobility even when fully loaded.

The 91WS incorporates advanced technology to enhance its performance. Its powerful motor delivers strong suction capabilities, while the innovative filtration system effectively separates solids from liquids, preventing clogging and maintaining optimal efficiency. The vacuum's advanced design also allows for quick and easy emptying, minimizing downtime and boosting productivity.

Another significant characteristic of the Nilfisk-ALTO 91WS is its user-friendly interface. Operators will appreciate the intuitive controls that make it simple to adjust settings and monitor performance. The vacuum is designed for easy maintenance; access to key components is straightforward, ensuring that servicing is efficient, and the machine continues to operate at peak capacity.

The 91WS also features multiple attachment options, allowing users to customize the machine for specific tasks. Whether it's cleaning up after spills or managing waste disposal, the versatility of the attachments ensures that it can handle various cleaning challenges with ease.

Safety is paramount in any industrial environment, and the Nilfisk-ALTO 91WS is designed with several safety features. The integrated float system prevents overflow, and the durable construction of the vacuum ensures that it can withstand rigorous use without posing risks to the operator.

In summary, the Nilfisk-ALTO 91WS is a powerful and versatile waste water vacuum that excels in demanding situations. With its strong performance, advanced technologies, and user-friendly features, it is an ideal solution for any business looking to optimize their cleaning processes while ensuring safety and efficiency.
Top Page Image Contents