Helpful Hints for Sweeping See Figure | Nilfisk-ALTO 114RS SWEEPER

OPERATING INSTRUCTIONS

	SIDE AISLES
	MAIN AISLE
P4134/0001	SIDE AISLES
P4134	FIGURE 9

HELPFUL HINTS FOR SWEEPING - See Figure 9

Here are some suggestions to keep in mind while sweeping.

1.Plan your sweeping in advance. Try to arrange long runs with minimum stopping and starting.

2.Pick up large debris before sweeping with the Machine.

3.Use the sweeper to sweep debris from side aisles into the main aisle.

4.After the Sweeper has made a sweeping run, turn off the dust control switch and use the filter shaker, Push and hold the shaker switch for approximately 15 seconds

5.Allow a few inches of overlap of sweep paths. This will eliminate leaving dirty patches.

6.Sweep in straight paths and do not bump posts or scrape the sides of the machine.

7.Periodically turn the sweeping broom end for end to prevent the bristles from “setting” in one direction.

8.Do not turn steering wheel too sharply when machine is in motion. The machine is very responsive to movement of the steering wheel - so avoid sudden turns.

9.As the Hopper becomes full, the sweeper will start to leave debris on the floor. When this occurs stop sweeping and empty the hopper.

TO EMPTY THE HOPPER

1.Place the Main Broom Lever in the “Off” position, raise Side Brooms, and proceed to the disposal site for emptying the Hopper.

2.Stop the Sweeper, Turn off the dust control switch and shake the filter for 15 seconds.

3.Place all controls in the “Off ” position and engage the wheel Lock.

4.Proceed to the rear of the Sweeper and unlock the Hopper latch.

5.Grasp the Hopper Handle and remove the hopper.

6.Dump the Hopper. Get Help if needed.

7.Position the Hopper and install it making sure that the Hopper goes in squarely.

8.Lock the Hopper Latch.

9.Resume Sweeping or perform the Post Operation Checklist if finished Sweeping.

TO STOP THE SWEEPING OPERATION

When the sweeping has been completed follow these instructions.

NOTE

After stopping, perform these post operation checks.

POST OPERATION CHECKLIST

1.Before turning off key switch, Check Battery Condition Meter.

2.Stop Machine and turn key switch to “Off” and Engage Wheel Lock.

3.Check all flaps for wear, damage, and adjustment.

4.Empty Hopper

5.Check Main Broom and Side Broom for wear or damage.

6.Charge Batteries if determined to be necessary in step 1 above.

American-Lincoln Technology	1-15
114 RS Operator’s Manual

114RS SWEEPER specifications

The Nilfisk-ALTO 114RS Sweeper is a powerful and efficient machine designed to meet the demanding needs of commercial and industrial cleaning applications. This versatile equipment is widely recognized for its durability, ease of use, and advanced features, making it an essential tool for maintaining cleanliness in various environments such as warehouses, shopping centers, and outdoor spaces.

One of the standout features of the Nilfisk-ALTO 114RS is its robust design. Constructed with high-quality materials, this sweeper is built to withstand tough working conditions while ensuring long-lasting performance. The ergonomic design makes it easy to maneuver, even in tight spaces, allowing operators to clean large areas quickly and effectively.

The Nilfisk-ALTO 114RS is equipped with a powerful suction system that delivers excellent dust control. This technology minimizes airborne particles, providing a cleaner and healthier environment for both workers and customers. The dual filter system enhances dust collection efficiency, extending the lifespan of the filters and reducing maintenance needs.

Another notable characteristic of the 114RS is its advanced intuitive controls. The user-friendly interface simplifies operation, enabling operators to focus on cleaning rather than navigating complex settings. The adjustable sweeping speed allows for optimized performance based on the nature of the task, ensuring thorough cleaning without compromising efficiency.

In addition, the Nilfisk-ALTO 114RS features a large debris hopper that can hold a significant amount of waste, reducing the frequency of emptying and allowing for continuous operation over extended periods. The easy-to-empty hopper further enhances productivity, making it convenient for workers to dispose of collected debris quickly.

The battery-powered version of the 114RS provides the added benefit of being environmentally friendly and quieter compared to gas-powered alternatives. This makes it suitable for use in noise-sensitive areas, such as hospitals or schools, without disrupting daily activities.

Overall, the Nilfisk-ALTO 114RS Sweeper combines powerful cleaning performance, advanced technology, and user-friendly design. Its robust construction, dust control capabilities, efficient operation, and environmental considerations make it an ideal choice for businesses seeking to maintain high cleanliness standards while maximizing operational efficiency. The 114RS is not just a sweeper; it is a reliable partner in achieving a cleaner and more productive workspace.