Remote operation

Remove upper motor housing.

Align the 6 holes on the yoke and replace with the screws saved from earlier step. Tighten securely.

Tighten 2 downrod set screws and lock nuts.

Remote Transmitter Dip swtiches

Remote Receiver Dip switches

Set dip switches on the Remote Transmitter and Remote Receiver to the same settings. This must be done so the units will communcate properly. If you have other fans you can set to control from one transmitter by setting both receivers the same as the transmitter. If you have more than one fan with remote. You can set the dip switches to different positiosns to have seperate control.

Place blades in the side slots of the	Replace upper motor housing.
motor. Line up the 3 holes and install
washers and screws securely.
11	12

Slide canopy and yoke cover onto the

Align hole in downrod with hole in

downrod. Thread the leadwires and

yoke and install cross pin. Install

safety cable through the downrod as

shown.

downrod into yoke. Install keeper

into cross pin.

Safety cable installation

Safety Cable

Lag Screw

safety

cable

washer

3” lag

lock

screw

washer

Fan and light

kit combinations over 35 lbs,

Raise fan with downrod assembled to

in both flush and downrod mode the safety

the ceiling bracket and hang fan

cable must be installed into the house struc-

ture beams using the 3” lag screws,washers,

assembly. Be sure to rotate the

and lock washers. provided. Make sure that

downrod ball so that the notch in the

when the safety cable is fully extended the

lead wires are longer than the cable and no

bracket engages the slot in the ball.

stress is placed on the lead wires.

white

black

Make wiring connections as indicated above.

White from fan to white from remote marked

N. Blue from fan to blue from remote marked

light. Black from fan to Black from remote

Install remote receiver by sliding into opening in

marked L. White from house to white from

the Mounting bracket. Make sure that the dip

remote marked AC N . Black from house to

switches on the Transmitter and the Receiver

Black from remote marked AC L. Connect all

are set to the same position. See Fig 34 for

green ground wires to Ground wire from

House.

5LNR52XXD Series specifications

The Monte Carlo Fan Company is renowned for its innovative and stylish ceiling fans, and their 5LNR52XXD Series stands out as a remarkable addition to their lineup. This series combines contemporary design with cutting-edge technology, making it a favorite among both homeowners and interior designers.

One of the key features of the 5LNR52XXD Series is its sleek, modern aesthetic. The fans are available in a range of finishes, allowing them to seamlessly blend into various décor styles, from minimalist to industrial. Each model is designed with attention to detail, featuring smooth lines and clean silhouettes that contribute to a sophisticated ambiance in any space.

Energy efficiency is a paramount consideration in the design of the 5LNR52XXD Series. Equipped with a powerful yet silent motor, these fans provide superior airflow while consuming less energy than traditional ceiling fans. This efficiency not only helps reduce electricity bills but also makes them an eco-friendly choice for those looking to minimize their carbon footprint.

The series also incorporates advanced technology, including remote control operation. Homeowners can easily adjust the fan speed, switch the unit on or off, and even change the direction of airflow with the touch of a button. This convenience adds to the overall user experience, allowing for personalized comfort in any room.

Another innovative characteristic of the 5LNR52XXD Series is its versatility in installation. Designed for both flush mount and downrod installation, these fans can accommodate various ceiling heights, ensuring optimal performance in diverse spaces. This adaptability makes them suitable for living rooms, bedrooms, patios, and more.

Additionally, the Monte Carlo Fan Company prioritizes durability, using high-quality materials in the construction of the 5LNR52XXD Series. The blades are typically made from engineered wood or fiberglass composites, ensuring longevity and resistance to warping over time. This commitment to quality ensures that customers not only enjoy the aesthetic appeal of their fans but also their reliable performance for years to come.

In summary, the Monte Carlo Fan Company 5LNR52XXD Series exemplifies a perfect blend of style, efficiency, and technology. Its modern design, energy-saving features, remote control operation, versatile installation options, and exceptional durability make it an excellent choice for anyone looking to enhance their living space with a functional and attractive ceiling fan.