Monte Carlo Fan Company 5LNR52XXD Series specification

SAFETY TIPS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,

OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS

Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70- 1999), including fire-rated construction.

Use this unit only in the manner intended by the manufacurer. If you have any questions contact the manufacturer.

After making the wire connections, the wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box and ungrounded conductor on the other side of the outlet box.

Before you begin installing the fan, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag,

5. to the service panel.

6. Be cautious! read all instructions and safety information before installing your new fan. Review the accompanying assembly diagrams.

7. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 7 feet from

8. the floor to the trailing edge of the blade.

To reduce the risk of fire, electric shock, or personal injury, mount to outlet box or supporting system acceptable for fan support. Use only the

9. screws provided with the outlet box. (Mounting must support at least 35 lbs. (16kg.)).

10. Do not bend blade holders during installation to motor, balancing or during cleaning. Do not insert foreign object between rotating blades.

11. Attach the mounting bracket using only the hardware supplied with the outlet box.

12. To reduce the risk of fire or electric shock, do not use this fan with any solid state fan speed control device, or variable speed control.

13. If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application.

14. NEVER place a switch where it can be reached from a tub or shower.

The combustion airflow needed for safe operation of fuel-burning equipment may be affected by this unit’s operation. Follow the heating equip- ment manufacturer’s guideline safety standards such as those published by the National Fire Protection Association (NFPA), and the American

15. Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code authorities.

Before servicing or cleaning unit, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

Note - For Outdoor Fans Only: Suitable for use in damp locations when installed in a GFCI protected branch circuit.

Phillips Screwdriver

Wire Cutters

Pliers

Step Ladder

Before you begin installing the fan, Switch power off at Service panel and lock service dis- connecting means to prevent power from being switched on accidentally. When the service dis- connecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

Before installing this fan make sure the outlet box is properly installed to the house structure. To reduce the risk of fire, electric shock, or per- sonal injury, mount to outlet box or supporting system acceptable for fan support. (Mounting must support at least 35 lbs.(16 kg.)).

Use metal outlet box suitable for fan support (must support 35 lbs). Before attaching fan to outlet box, ensure the outlet box is securely fastened by at least two points to a structural ceiling member ( a loose box will cause the fan to wobble). Use only the screws pro- vided with the outlet box.

Remove keeper from cross pin and then cross pin from yoke. Replace keeper on cross pin and save.

Loosen lock nuts and screws on yoke till you can not feel screw on inside of yoke.

Remove 6 yoke screws and save.

5LNR52XXD Series specifications

The Monte Carlo Fan Company is renowned for its innovative and stylish ceiling fans, and their 5LNR52XXD Series stands out as a remarkable addition to their lineup. This series combines contemporary design with cutting-edge technology, making it a favorite among both homeowners and interior designers.

One of the key features of the 5LNR52XXD Series is its sleek, modern aesthetic. The fans are available in a range of finishes, allowing them to seamlessly blend into various décor styles, from minimalist to industrial. Each model is designed with attention to detail, featuring smooth lines and clean silhouettes that contribute to a sophisticated ambiance in any space.

Energy efficiency is a paramount consideration in the design of the 5LNR52XXD Series. Equipped with a powerful yet silent motor, these fans provide superior airflow while consuming less energy than traditional ceiling fans. This efficiency not only helps reduce electricity bills but also makes them an eco-friendly choice for those looking to minimize their carbon footprint.

The series also incorporates advanced technology, including remote control operation. Homeowners can easily adjust the fan speed, switch the unit on or off, and even change the direction of airflow with the touch of a button. This convenience adds to the overall user experience, allowing for personalized comfort in any room.

Another innovative characteristic of the 5LNR52XXD Series is its versatility in installation. Designed for both flush mount and downrod installation, these fans can accommodate various ceiling heights, ensuring optimal performance in diverse spaces. This adaptability makes them suitable for living rooms, bedrooms, patios, and more.

Additionally, the Monte Carlo Fan Company prioritizes durability, using high-quality materials in the construction of the 5LNR52XXD Series. The blades are typically made from engineered wood or fiberglass composites, ensuring longevity and resistance to warping over time. This commitment to quality ensures that customers not only enjoy the aesthetic appeal of their fans but also their reliable performance for years to come.

In summary, the Monte Carlo Fan Company 5LNR52XXD Series exemplifies a perfect blend of style, efficiency, and technology. Its modern design, energy-saving features, remote control operation, versatile installation options, and exceptional durability make it an excellent choice for anyone looking to enhance their living space with a functional and attractive ceiling fan.