Monte Carlo Fan Company 5ML52 owner manual Observe the Following Read and Save These Instructions

Page 2
TOOLS REQUIRED
Wire Cutters Pliers 3
1.
2.
3.
4.

5ML52-CUL-ENG

SAFETY TIPS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,

OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS

Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70-1999), including fire-rated construction.

Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer.

After making the wire connections, the wires should be spread apart with the grounded conductor and the equipment-grounding con- ductor on one side of the outlet box and ungrounded conductor on the other side of the outlet box.

Before you begin installing the fan, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

5. Be cautious! read all instructions and safety information before installing your new fan. Review the accompanying assembly diagrams.

6. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

7. Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 7 feet from the floor to the trailing edge of the blade.

8. To reduce the risk of fire, electric shock, or personal injury, mount to outlet box or supporting system acceptable for fan support. (Mounting must support at least 35 lbs.)

9. Do not bend blade holders during installation to motor, balancing or during cleaning. Do not insert foreign object between rotating blades.

10. Attach the mounting bracket using only the hardware supplied with the outlet box.

11. To reduce the risk of fire or electric shock, do not use this fan with any solid state fan speed control device, or variable speed control.

12. If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application.

13. NEVER place a switch where it can be reached from a tub or shower.

14. The combustion airflow needed for safe operation of fuel-burning equipment may be affected by this unit’s operation. Follow the heating equipment manufacturer’s guideline safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code authorities.

15. Before servicing or cleaning unit, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

Phillips Screwdriver

1 2

 

 

Before you begin installing the fan, Switch power off

 

 

 

 

Before installing this fan

make sure the outlet

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

at Service panel and lock service disconnecting means

 

 

 

box is properly installed to the house structure.

 

 

 

 

to prevent power from being switched on accidentally.

 

 

 

To reduce the risk of fire, electric shock, or per-

 

 

 

 

When the service disconnecting means cannot be

 

 

 

sonal injury, mount to outlet box or supporting

 

 

 

 

locked, securely fasten a prominent warning device,

 

 

 

system acceptable for fan support.

 

 

 

4suc

h as a tag, to the service panel.

 

 

 

(Mounting must support at least 35 lbs.)

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Step Ladder

Install the Mountiing Bracket to the Outlet box.

Use only the screws provided with the out- let box.

6

Install canopy and yoke cover over the down- rod.

Thread wire through downrod with canopy and yoke cover assembled.

Insert downrod into motor yoke. Next, insert clevis pin through yoke and downrod and secure with cotter pin. (see inset)

Image 2
Contents Manual Observe the Following Read and Save These Instructions Use only the screws provided with the out- let boxSafety cable installation Safety Cable Lag ScrewTrouble Suggested Remedy

5ML52 specifications

The Monte Carlo Fan Company 5ML52 is a striking ceiling fan designed to enhance both aesthetic appeal and functional performance in any space. Combining contemporary design with efficient engineering, this fan caters to both style enthusiasts and those looking for practical cooling solutions.

One of the standout features of the 5ML52 is its sleek, minimalist design. With a modern silhouette and a variety of finish options, including brushed steel, matte black, and oil-rubbed bronze, it seamlessly integrates into diverse decor styles, from industrial to modern farmhouse. The fan’s 52-inch blade span makes it ideal for medium-sized rooms, efficiently circulating air and ensuring comfort in living rooms, bedrooms, or kitchens.

The Monte Carlo 5ML52 incorporates advanced motor technology, featuring a powerful yet quiet DC motor. This energy-efficient motor not only reduces energy consumption but also operates quietly, making it perfect for spaces where noise can be a concern, such as bedrooms or study areas. The fan's three-speed settings allow users to customize the airflow according to their preferences and needs, ensuring optimal comfort throughout the day and night.

Another notable characteristic of the 5ML52 is its compatibility with various smart home systems. Equipped with the ability to pair with remote controls and smart home technologies, users can easily manage their fan's operation from anywhere in the room. This intelligent feature adds convenience, allowing for adjustments without the need to get up, especially appreciated during warm evenings or during social gatherings.

In terms of installation, the Monte Carlo 5ML52 has a user-friendly design. With a quick installation process, it allows homeowners to set up their ceiling fan with ease while maintaining sturdy performance. The fan's reversible motor also offers seasonal comfort, allowing for counter-clockwise rotation in summer for a cooling breeze and clockwise rotation in winter to redistribute warm air.

In summary, the Monte Carlo Fan Company 5ML52 combines an elegant modern design, energy-efficient technology, and user-friendly features. With its impressive motor performance, versatile finish choices, and adaptability to smart home systems, it stands out as a top choice for those seeking to elevate their indoor space while enjoying the benefits of effective air circulation.