Monte Carlo Fan Company 5SCR60BR3 owner manual Safety cable installation

Page 4

19

Install yoke cover over downrod.

22

Tighten set screws to hold ball in place.

25Safety cable installation

Safety Cable

Lag Screw

safety cable

washer

3” lag lock screw washer

Fan and light kit combinations over 35 lbs, in both flush and downrod mode the safety cable must be installed into the house struc- ture beams using the 3” lag screws,washers, and lock washers. provided. Make sure that when the safety cable is fully extended the lead wires are longer than the cable and no stress is placed on the lead wires.

28

Make wire connections to power source using wire nuts provided. Make sure that no filiments are outside of the wirenut. After making the wire connections, the wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box and ungrounded conductor on the other side of the outlet box.

20

Install canopy cover over downrod.

23

Remote Transmitter Dip swtiches

Remote Receiver Dip switches

Set dip switches on the Remote Transmitter and Remote Receiver to the same settings. This must be done so the units will communcate properly. If you have other fans you can set to control from one transmitter by setting both receivers the same as the transmitter. If you have more than one fan with remote. You can set the dip switches to different positiosns to have seperate control.

26

Install remote receiver by sliding into opening in the Mounting bracket. Make sure that the dip switches on the Transmitter and the Receiver are set to the same position. See Fig 57 for remote operation

29

Lift canopy to ceiling aligning the key hole slots with the screws on the bottom of the mounting bracket. Rotate the canopy counter clockwise to lock in place. Tighten the screws to secure the canopy. See inset for keyhole shape

21

Place ball on downrod. Replace pin removed earlier and pull ball up so that the pin fits in the notches in the ball.

24

Raise fan with downrod assembled to the ceiling bracket and hang fan assembly. Be sure to rotate the downrod ball so that the notch in the bracket engages the slot in the ball.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

27

 

 

 

 

 

 

Fan

 

 

House

 

 

 

 

 

 

 

 

 

 

 

 

fuses

 

 

 

 

white

 

white

 

 

 

 

 

 

 

 

 

 

black

 

 

 

 

 

 

 

 

 

 

 

 

 

orange

 

black

 

 

 

 

 

 

 

 

 

 

 

blue

Green

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Make wiring connections as indicated above. White from fan to white from remote marked N. Orange from fan to Orange from remote marked Light/up. Blue from fan to blue from remote marked down light. Black from fan to Black from remote marked L. White from house to white from remote marked AC N . Black from house to Black from remote marked AC L. Connect all green ground wires to Ground wire from House.

30

Attach blade arms to blades using the blade arm screws and washers provided.

Image 4
Contents Owner’s Manual Phillips Screwdriver Wire Cutters Pliers Loosen set screws that holds ball Safety cable installation For light kit go to step Page Attach front cover to wall control with screws provided Suggested Remedy REV.0

5SCR60BR3 specifications

The Monte Carlo Fan Company 5SCR60BR3 is a sophisticated ceiling fan that combines contemporary design with innovative technology, making it an exceptional choice for modern homes. Its sleek, refined appearance is characterized by a rich bronze finish and a simple yet elegant five-blade configuration, which provides both aesthetic appeal and functionality.

One of the standout features of the 5SCR60BR3 is its powerful motor, designed to deliver efficient airflow while maintaining a quiet operation. This is particularly beneficial for living spaces where comfort and tranquility are paramount. The fan includes reversible motor technology, allowing users to switch the direction of the blades. This feature supports both cooling in the summer and warm air circulation during the winter months, promoting year-round comfort and energy efficiency.

Another defining characteristic of the Monte Carlo 5SCR60BR3 is its size. With a 60-inch blade span, this fan is ideal for larger rooms, making it a perfect fit for living rooms, bedrooms, or open-concept spaces. The fan’s blades are crafted from premium materials that not only enhance durability but also improve airflow performance, ensuring effective circulation throughout the room.

In terms of installation, the 5SCR60BR3 is designed with user convenience in mind. It includes a standard mounting system that makes it easy to install, even for those who may not have extensive DIY experience. The fan is also compatible with a range of smart home technologies, allowing integration with voice control systems and mobile apps. This versatility aligns with the growing trend of smart home automation, making the Monte Carlo fan a forward-thinking choice.

For lighting, the fan can be paired with compatible light kits, offering additional ambient illumination to enhance the room's overall atmosphere. The included remote control, with its intuitive interface, allows users to adjust fan speed and light levels effortlessly from anywhere within the vicinity.

The Monte Carlo Fan Company 5SCR60BR3 is not just a practical addition to any room; it is also a stylish statement piece that complements modern decor. With its combination of performance, style, and advanced technology, this ceiling fan redefines the standard for home comfort solutions, making it a top choice for discerning homeowners.