Monte Carlo Fan Company 5AB52 owner manual Before installing this fan Make sure the outlet

Page 2
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.

SAFETY TIPS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,

OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS

Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70- 1999), including fire-rated construction.

Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer.

After making the wire connections, the wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box and ungrounded conductor on the other side of the outlet box.

Before you begin installing the fan, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

Be cautious! read all instructions and safety information before installing your new fan. Review the accompanying assembly diagrams. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 7 feet from the floor to the trailing edge of the blade.

To reduce the risk of fire, electric shock, or personal injury, mount to outlet box or supporting system acceptable for fan support. (Mounting must support at least 35 lbs.) Use mounting screws provided with the outlet box.

Do not bend blade holders during installation to motor, balancing or during cleaning. Do not insert foreign object between rotating blades. Attach the mounting bracket using only the hardware supplied with the outlet box.

To reduce the risk of fire or electric shock, do not use this fan with any solid state fan speed control device, or variable speed control. If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application.

NEVER place a switch where it can be reached from a tub or shower.

The combustion airflow needed for safe operation of fuel-burning equipment may be affected by this unit’s operation. Follow the heating equip- ment manufacturer’s guideline safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code authorities.

Before servicing or cleaning unit, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

16. Airflow direction: warm weather - switch to left -forward / cool weather -switch to right - reverse.

 

 

Phillips Screwdriver

Wire Cutters

Pliers

 

1

 

2

 

 

 

 

 

 

 

Before you begin installing the fan, Switch power off

 

Before installing this fan

make sure the outlet

 

 

 

 

 

at Service panel and lock service disconnecting means

 

box is properly installed to the house structure.

 

 

to prevent power from being switched on accidentally.

 

To reduce the risk of fire, electric shock, or per-

 

 

When the service disconnecting means cannot be

 

sonal injury, mount to outlet box or supporting

 

 

locked, securely fasten a prominent warning device,

 

system acceptable for fan support.

 

 

such as a tag, to the service panel.

 

(Mounting must support at least 35 lbs.)

 

 

4

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

3Step Ladder

Install the Mountiing Bracket to the Outlet box.

Use only the screws provided with the out- let box.

6

Thread wire thru canopy.

Thread wire thru downrod.

Insert downrod into motor yoke. Next, insert clevis pin through yoke and downrod and secure with cotter pin. (see inset)

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Owner’s Manual 28.6 LBSSonal injury, mount to outlet box or supporting Before installing this fan Make sure the outletInstall the Mountiing Bracket to the Outlet box Use only the screws provided with the out- let boxSafety Cable Lag Screw House FanStart Incorrect assembly, installationIf fan does not

5AB52 specifications

The Monte Carlo Fan Company 5AB52 is an exquisite ceiling fan that embodies both modern aesthetics and advanced engineering. In the realm of ceiling fans, the 5AB52 stands out with its sleek design and powerful performance. This fan is designed to provide efficient airflow, making it an ideal choice for cooling down any room, while also enhancing the overall décor.

One of the main features of the Monte Carlo 5AB52 is its size. With a 52-inch blade span, it is perfectly sized for medium to large rooms, such as dining areas, living rooms, or bedrooms. The fan is available in various finishes, allowing homeowners to select an option that best fits their existing interior design. Choices include classic finishes like white and oil-rubbed bronze, as well as more contemporary options like matte black or brushed nickel.

The 5AB52 is powered by a robust motor that ensures quiet operation, even at high speeds. This is particularly beneficial for those who prefer a peaceful environment, as it allows for comfortable cooling without the disruptive noise that can often accompany ceiling fans. Additionally, the motor is designed with energy efficiency in mind, contributing to lower energy bills and a reduced carbon footprint.

Another remarkable feature is the fan's blades, which are crafted from high-quality materials. They are not only durable but also aerodynamically designed, enhancing airflow efficiency. The blades are also meticulously balanced to minimize wobbling, creating a steady and pleasant breeze.

The Monte Carlo 5AB52 offers versatile control options. It can be operated via pull chain, wall control, or even remote control depending on the installation and setup. This ensures that users have the flexibility to choose the most convenient method for their needs.

Installation is made easy thanks to the fan's versatile mounting system, which allows for standard, flush, or angled installations. This adaptability means that homeowners can install the fan in a variety of settings, whether they have high ceilings or a more standard architectural style.

Overall, the Monte Carlo Fan Company 5AB52 is a blend of style, functionality, and advanced technology. It not only promises to enhance the comfort of any space but also adds a touch of elegance to the home. Its thoughtful design and features make it a favorite among homeowners seeking a reliable and attractive ceiling fan solution.
Top Page Image Contents