MOUNTING AND WIRING

!WARNING

Do not use on circuits exceeding specified voltage. Higher voltage will damage control and could cause shock or fire hazard.

!CAUTION

To prevent electrical shock and/or equipment damage, disconnect electric power to system at main fuse or circuit breaker box until installation is complete. Failure to earth ground the appli- ance or reversing the neutral and hot wire con- nection to the line can cause shock hazard.

Shut off main gas to heating system until instal- lation is complete.

Route and secure all wiring as far from flame as practical to prevent fire and/or equipment damage.

To prevent damage to the transformer, system components or wiring harness, take care when drilling new mounting holes. Failure to do so may result in electrical shock, fire hazard or equip- ment damage.

INSTALLATION

NOTE

All wiring should be installed according to local and national electrical codes and ordinances.

The control must be secured to an area that will experi- ence a minimum of vibration and remain below the maxi- mum ambient temperature rating of 175°F. The control is approved for minimum ambient temperatures of -40°F.

When mounting the control, any orientation is acceptable. Choose a location that will not damage, obstruct or place stress on the control’s terminations, system wiring har- ness or system components. After finding a suitable location, drill four (4) 1⁄8” holes for mounting control. To ensure proper mounting hole locations, there is a mount- ing hole template on page 8 of this instruction sheet. Detach the page with the template from the instruction sheet and apply it to the mounting location. When drilling the holes, take care so that the transformer, wiring har- ness or other system components are not damaged. Four

(4)#8 sheet metal screws are provided to complete the installation.

Refer to the wiring diagram and wiring table when con- necting the 50A55 control to other components of the system.

UL approved, 105°C rated 18 gauge, stranded, 2⁄64” thick insulation wire is recommended for all low voltage safety circuit connections. Refer to 50A55 specification sheet for recommended terminals to mate with those on the control.

UL approved 105°C rated 16 gauge min., stranded, 4⁄64” thick insulation wire is recommended for all line voltage connections. Refer to 50A55 specification sheet for rec- ommended terminals to mate with those on the control.

After installation or replacement, follow appliance manufacturer’s recommended installation or service in- structions to ensure proper operation.

The 50A55 has only one serviceable part–an automotive type fuse, which protects the low voltage transformer from damage if its output is short-circuited. If the fuse has opened up, remove whatever caused the short circuit and replace the fuse with only a 3 Amp automotive type fuse. If the fuse is not the cause of the control’s problem, replace the entire 50A55 control. There are no other user serviceable parts.

3

Page 2 Page 4
Page 3
Image 3
White Rodgers 50a55-286 installation instructions Mounting and Wiring, Installation
Page 2 Page 4

50a55-286 specifications

The White Rodgers 50A55-286 is a highly esteemed thermostat designed for residential heating and cooling systems. Known for its reliability and user-friendly interface, this device integrates cutting-edge technology with versatility that appeals to a wide range of users. The 50A55-286 is particularly recognized for accommodating various HVAC systems, including gas, oil, and electric heating as well as central air conditioning.

One of the most prominent features of the White Rodgers 50A55-286 is its digital display, which provides clear readability of the current temperature settings and system status. The thermostat is equipped with an intuitive user interface that allows users to easily adjust temperatures and settings. The programming capabilities enable users to set distinct temperatures for different times of the day, promoting energy efficiency. This feature not only aids in maintaining comfort but also helps in reducing energy costs by avoiding unnecessary heating or cooling when not needed.

In addition to its programmable functions, the White Rodgers 50A55-286 is designed with both heat and cool settings. This versatility is essential for homes with varied climate needs throughout the year. The thermostat also includes a blower control that provides optimal airflow management, enhancing comfort in living spaces.

The technological design of the 50A55-286 adheres to industry standards while ensuring compatibility with most existing systems. The quick-connect terminals facilitate straightforward installation, making it accessible to both experienced technicians and DIY enthusiasts. Moreover, the thermostat's robust construction ensures durability and longevity, even in the face of temperature fluctuations.

Another significant characteristic is the precise temperature control that the White Rodgers 50A55-286 offers. It features an accuracy range that allows for minimal temperature variance, ensuring that users can achieve and maintain their desired indoor environment. The thermostat's energy-saving settings further enhance its appeal, making it an eco-friendly choice for modern-day consumers.

In conclusion, the White Rodgers 50A55-286 thermostat is a well-rounded device, presenting key features such as its user-friendly design, compatibility with various HVAC systems, digital display, customizable programming, and energy efficiency. With its advanced technologies and solid performance, it remains a preferred choice for homeowners seeking reliable climate management solutions.
Top Page Image Contents