SAFETY TIPS
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS
Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70- 1999), including
Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer.
After making the wire connections, the wires should be spread apart with the grounded conductor and the
Before you begin installing the fan, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.
Be cautious! read all instructions and safety information before installing your new fan. Review the accompanying assembly diagrams. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 7 feet from the floor to the trailing edge of the blade.
WARNING – Risk of fire, electric shock, or personal injury, The fan in this box may be either directly supported from a structural framing member of a building and/or may be mounted to an outlet box marked acceptable for fan support of 31.8 kg. (70 lbs.) or less. Most outlet boxes .Attach the mounting bracket using only the hardware supplied with the outlet box.
9. To reduce the risk of fire or electric shock, do not use this fan with any solid state fan speed control device, or variable speed control.
10. If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application.
11. NEVER place a switch where it can be reached from a tub or shower.
12. The combustion airflow needed for safe operation of
13. Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code authorities.
Before servicing or cleaning unit, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally.
14. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.
15Before servicing or cleaning unit, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.
| 1 | Phillips Screwdriver | Wire Cutters | Pliers | ||
|
|
| 2 |
|
| |
|
|
|
|
| ||
|
|
|
|
|
|
|
| Before you begin installing the fan, Switch power off |
| Before installing this fan | make sure the outlet |
|
| ||||||||||||||
|
|
| ||||||||||||||||||
| at Service panel and lock service disconnecting means |
| box is properly installed to the house structure. |
|
| |||||||||||||||
| to prevent power from being switched on accidentally. |
| To | reduce the risk of fire, electric shock, or per- |
|
| ||||||||||||||
| When the service disconnecting means cannot be |
| sonal injury, mount to outlet box or supporting |
|
| |||||||||||||||
| locked, securely fasten a prominent warning device, |
| system acceptable for fan support. |
|
| |||||||||||||||
| such |
| as a tag, to the service panel. |
| (Mounting must support at least 70 lbs.) |
|
| |||||||||||||
|
|
|
|
| Safety cable installation |
|
| 5 |
|
| BUILDING STRUCTURE METHOD |
|
|
|
| |||||
4 |
|
|
|
|
|
|
|
|
|
|
| |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Lag Screw |
|
|
|
|
|
| Mounting |
|
|
|
|
| |||||||
| Safety Cable |
|
|
|
|
|
|
|
|
|
|
| ||||||||
|
|
|
| Outlet box |
| Plate |
|
|
|
|
| |||||||||
|
|
|
| Lag Screw |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| Safety Cable |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
| Washer |
|
|
|
|
|
| Wood |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
| Lock Washer |
|
|
|
|
|
| Screws |
|
|
|
|
|
|
| ||
| For Canadian | installation and for USA fan and |
|
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
|
| Secure mounting plate directly to a joist from |
|
| ||||||||||||||||
light kit combinations over 35 lbs, in both flush |
|
|
| |||||||||||||||||
and downrod mode the safety cable must be |
| the buliding structure via the two knock out |
|
| ||||||||||||||||
installed into the house structure beams using |
| holes on the outlet box. Use only the appropri- |
|
| ||||||||||||||||
the 3” lag screws provided. Make sure that |
| ate wood screws and washers included with |
|
| ||||||||||||||||
when the safety cable is fully extended the |
| your fan. Caution: Wood screws must go |
|
| ||||||||||||||||
leadwires are longer than the cable and no |
| through the safety cable,hanging plate,outlet |
|
| ||||||||||||||||
stress is placed on the leadwires. |
| box and into the building joist. |
|
| ||||||||||||||||
|
|
| ||||||||||||||||||
3Step Ladder
Thread safety cable through center hole of the mounting plate. Thread your house wires through center hole also.These will be needed for wiring of the fan.
6
Remove 1 screws opposite each other and loosen 3 remaining screws. Save removed screws for use later.