Monte Carlo Fan Company 5SI owner manual Black Blue White Green, Place blade onto blade holder

Page 3

7

Tighten both yoke set screws to further secure downrod.

10

Make wire connections to power source using wire nuts provided. Make sure that no filiments are outside of the wirenut. After making the wire connections, the wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box and ungrounded conductor on the other side of the outlet box.

8

Carefully lift fan assembly onto mounting bracket. Rotate fan so that the notch on the ball engages the ridge in the mounting bracket. This will allow hands-free wiring.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

House

 

 

Fan

 

 

 

11

 

 

 

 

Black

 

 

Black

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Blue

 

 

 

 

White

 

 

 

 

 

White

 

 

 

 

Green

 

 

 

 

 

 

 

 

 

 

 

 

 

Green(downrod)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Green(Bracket)

 

For pullchain controls, follow diagram above. Make sure that all exposed wiring is secured inside wire nuts. Note: Wires from house may vary in color and may not include ground wire. After wiring is conplete, gently push wires into junction box with wire nuts pointing upward. Refer to point 3 of safety tips.

9Safety cable installation

Safety Cable

Lag Screw

For Canadian installation and for USA fan and light kit combinations over 35 lbs, in both flush and downrod mode the safety cable must be installed into the house structure beams using the 3” lag screws provided. Make sure that when the safety cable is fully extended the leadwires are longer than the cable and no stress is placed on the leadwires.

12

Fan Switch

Light Switch

Wall

Control

For control of fan and optional light from wall location, follow diagram above. NOTE: A profes- sional electrician is recommended for this type of installation.

13

Raise the canopy up and align the two holes in the canopy with the two holes in the hanger bracket. Secure with two screws provided.

14

Place blade onto blade holder.

15

Install 3 screws and washers per blade and tighten securely. Repeat for all 5 blades

16

17

Check the motor for plastic shipping stabilizer tabs, and remove them if they are present. Attach blade assembly to motor using the motor screws and washers provided. Tighten screws securely.

After attaching blade; reinstall the switch hous- ing using the three screws previously removed.

Image 3
Contents Owner’s Manual Port of of 31.8 kg 70 lbs or less. Most outlet Member of a building and/or may be mountedBlack Black Blue White GreenPlace blade onto blade holder For Light Kit Installation Only Not USE a Solid State variable speed control

5SI specifications

The Monte Carlo Fan Company 5SI is a remarkable ceiling fan that seamlessly combines aesthetic appeal with advanced functionality. Renowned for its sleek design, the 5SI offers a modern twist to traditional ceiling fans, making it an ideal choice for contemporary homes and commercial spaces alike.

One of the standout features of the 5SI is its minimalist design, which incorporates clean lines and a discrete profile. This ceiling fan is available in a variety of finishes, including brushed nickel, matte black, and antique brass, allowing it to complement diverse interior decor styles. The fan's 52-inch blade span is perfect for medium to large rooms, delivering excellent airflow while maintaining a stylish appearance.

The Monte Carlo 5SI is equipped with energy-efficient DC motors, which not only contribute to its quiet operation but also enhance its overall performance. These motors consume significantly less energy compared to traditional AC motors, making the 5SI an environmentally friendly choice. The whisper-quiet operation is particularly beneficial for bedrooms, living rooms, or any space where noise is a concern.

Another notable technology featured in the 5SI is its easy-to-use remote control system. The remote allows users to easily adjust the fan speed and light settings without the need for a wall switch. This added convenience enhances user experience, making it simple to create the perfect ambiance in any room.

The fan blades of the 5SI are crafted from high-quality materials, ensuring durability and longevity. The fan is designed with an aerodynamic shape to maximize airflow while minimizing noise. The 5SI’s blades are reversible, offering versatility in airflow direction; this means that users can enjoy a refreshing breeze during the summer months and warm air circulation during winter.

The Monte Carlo 5SI also features integrated LED lighting options, which provide bright and efficient illumination. The LED bulbs are designed to last longer and consume less energy compared to traditional bulbs, making them an ideal choice for energy-conscious consumers. With dimmable capabilities, the lighting can be adjusted to set the mood for any occasion.

In summary, the Monte Carlo Fan Company 5SI stands out as a premium ceiling fan that successfully merges style, efficiency, and advanced technology. Its modern design, energy-efficient motor, user-friendly remote control, durable materials, and integrated LED lighting make it an attractive and practical choice for those looking to enhance their living or working space.