TFP Connected to Heat Recovery Ventilator

TYPE 2 INSTALLATION

TFP Connected to Heat Recovery Ventilator

LOCATION

The TFP should be located in the main trunk of the fresh air to house line, after the Heat Recovery Ventilator (HRV) and before any branch lines. (Fig. 3)

MOUNTING

1.	Locate mounting bolts (4) on side of TFP cabinet
	for vertical hanging (Fig. 3) and remove.
2.	Measure distance between the bolts and mark it
	on the floor/header joist where the TFP is to be hung.

Type 2 Installation

*“Breathing T” is designed to assist in neutralizing pressure differences which can occur between HRV and TFP when joined together.

FLOOR JOISTS

	Mounting bolts	Hanging straps (4)
	Mounting bolts

3.	Fasten hanging straps to floor joists using wide
	head nails or screws with washers.
4.	Insert hanging bolts through prepunched holes in
	straps and lift TFP into position. Tighten and secure bolts.

DUCTING

HRV
Relief opening
(breathing T)	Flexible ducting
or leave a 4" - 6"	(fresh air supply)

gap between the TFP and the HRV

Power cord

7" port collars

Main supply trunk

TFP	Air flow
	To BRANCH LINES

Flexible ducting

TFP air cleaner

Access door

Figure 3

1.Install (2) 7” port collars (provided) on TFP cabinet with (8) 8/32” X 3/8” sheet metal screws provided (Fig. 3).

2.The ducting between the TFP and the HRV, and between the TFP and the main supply trunk line to the house, should be kept as straight as possible.

3.A relief opening or breathing T is required to prevent pressure differences.

4.A short piece (1-2 foot) of flexible ducting should be used on both sides of the TFP (Fig. 3).

This will reduce vibration and noise transfer if present.

NOTE: Please refer to the HRV installation manual for proper ducting of that appliance.

CAUTION

The room in which the breathing T is open should be free of combustion equipment such as gas hot water tanks and furnaces. If the T must be exposed in these areas, a pressure test (spillage or backdraft test)should be conducted on the combustion equipment after everything is installed.

TFP3000, TFP3000HEPA specifications

The Lifebreath TFP3000 and TFP3000HEPA are advanced air purification systems designed to enhance indoor air quality by employing cutting-edge technologies. Both models stand out for their ability to filter various pollutants, allergens, and harmful particles from the air, making them perfect for homes, offices, and any enclosed spaces.

At the core of the Lifebreath TFP3000 and TFP3000HEPA is the advanced filtration technology that combines multiple layers of filtration media. The TFP3000 features a high-efficiency particulate air (HEPA) filter that captures 99.97% of particles as small as 0.3 microns. This is particularly effective against dust, pollen, mold spores, and pet dander. The TFP3000HEPA takes this a step further by integrating a specialized HEPA filter designed to trap even finer particles, ensuring superior filtration for sensitive environments.

One of the most notable features of both models is their low operating noise level, which enables them to function quietly in the background without disrupting daily activities. This is particularly beneficial in bedrooms and workspaces where concentration and rest are essential.

The Lifebreath systems employ advanced air management technology which includes a powerful yet energy-efficient motor. This motor efficiently circulates air throughout the room, ensuring that every corner benefits from clean filtered air. The TFP3000 series also includes innovative sensors that monitor air quality in real-time, adjusting the fan speed based on the level of contaminants detected. This smart technology not only optimizes performance but also enhances energy savings.

Furthermore, both units are designed for easy maintenance; they come with filter replacement indicators that inform users when it’s time to change filters, ensuring consistent performance.

In terms of design, the sleek and modern aesthetics of the Lifebreath TFP3000 and TFP3000HEPA allow them to blend seamlessly into any home decor. With user-friendly controls and multiple fan speed options, these air purifiers empower users to customize their airflow preferences.

With their exceptional filtration capabilities, smart technology, and user-friendly features, the Lifebreath TFP3000 and TFP3000HEPA stand out as reliable choices for anyone looking to improve their indoor air quality and create a healthier living environment.