Koblenz/Thorne Electric U-900 Cleaning the Nozzle, If it should become clogged Model U-800

Page 9

CLEANING THE NOZZLE:

The nozzle hose carries the dirt from the nozzle to the dust bag, and also fuctions as the attachment cleaning hose.

If it should become clogged:

Model U-800

1.Unplug the power cord.

2.Lift up the lid of cleaning attachment opening. Remove the clog or blockage.

3.If the previous step does not correct the problem, pull the power nozzle from the cleaning attachment opening located at the base of the vacuum cleaner. Turn the unit over and remove the bottom plate (see page 14 removing the bottom plate), unscrew the hose inlet fitting screw, then pull out the entire nozzle hose from the housing. Clear the obstruction from the hose assembly, replace the hose in the housing and reinstall the bottom plate. See step 10 on page 15.

Model U-900

1.Unplug the power cord.

2.Open the lid on the cleaning attachment opening and remove the clog or blockage.

3.If the hose is still blocked, remove hose cuff from nozzle inlet.

4.Turn the unit over, remove bottom plate.

5.Check nozzle inlet tube for obstructions.

6.When clear, reinstall bottom plate. See instructions on page 15. Replacing the drive belt.

• Any other servicing should be performed by an Authorized Vacuum Cleaner service center.

-9-

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Operating Instructions Manual DE Usuario Read ALL Instructions Before Using this Appliance Important Safety InstructionsCommercial Model U-800 & U-900 Parts IdentificationModel U-800 Commercial Model U-900 Commercial HOW to Install Cleaning Tools Model U-800 CommercialVacuum Assembly Attaching the Handle Replacing the Dust BAGChecking the Secondary Filter Handle Adjustments Automatic SELF-ADJUSTING Carpet NozzleChecking the Exhaust Filter Vacuum OperationsResetting the Thermal Switch ON-BOARD Cleaning ToolsSuction Control Remove the Bottom PlateReplacing the Drive Belt Changing the Agitator BrushesFor Best Performance Cleaning the Nozzle If it should become clogged Model U-800Model U-900 Advertencias Instrucciones DE SeguridadBarredora Industrial Modelo U-800 Y U-900 Descripcion DEL ProductoModelo U-800 Industrial Modelo U-900 Industrial Como Instalar Accesorios Modelo U-800 IndustrialEnsamble DE LA Aspiradora Ensamble DE ManijaRevision DE Filtro DEL Motor Revision DE Filtro DE Salida Instrucciones DE USO Switch DE EncendidoAjuste DE Altura Automatica Ajuste DE ManijaAccesorios a Bordo Para Reiniciar EL Switch TermicoControl DE Succion Para Quitar LA Tapa InferiorCambiando LA Banda Cambio DE Cerdas DE CepilloPara UN Mejor Desempeño Limpieza DE Conexion DE Manguera Si se tapa Modelo U-800Modelo U-900 Warranty GarantiaCentros DE Servicio
Top Page Image Contents