Husqvarna 540200800 Auxiliary Engine Vacuum Assembly Servicing the Engine, Pre-Start Check

Page 13

Operators Guide

Auxiliary Engine Vacuum Assembly Servicing the Engine

1.Make sure that engine oil is at engine manufacturer’s recommended level (refer to engine manual).

2.Fill the fuel tank. Use fresh, clean, unleaded automotive gasoline.

Pre-Start Check

1.Make sure the stop switch is in the OFF position and spark plug wire is disconnected. Pull the starter rope slowly to make certain there are no foreign objects in the blower housing.

2.Be sure the spark plug wire and cover are attached to the spark plug.

Starting the Engine

1.Turn the stop switch to the ON position.

2.Move the choke lever to the FULL CHOKE position.

3.Move the throttle lever to the FULL THROTTLE position.

4.Grasp the starter handle firmly. Pull the handle with a rapid continuous motion.

5.When the engine starts, move the choke to 1/2 choke and then to NO CHOKE position

Operating the Vacuum

1.NEVER USE THE Z2-7 WITHOUT THE INLET COVER AND ALL HOSES SECURELY ATTACHED.

2.Make sure both hoses are connected at both ends. Inspect hoses prior to each use.

3.Do not use the Z2-7 on slopes greater than 15 degrees.

4.The mower must be running in order to vacuum debris through the mower deck.

5.In heavy grass it may be necessary to mow and vacuum at a slower ground speed.

6.Never attempt to unclog the Z2-7 until both the mower’s engine and vacuum’s engine have been shut off and all moving parts have come to a complete stop.

7.Do not stand behind the vent at the rear of the Z2-7 due to the potential for small pieces of blowing debris to escape through this vent.

8.Be sure to wear eye and ear protection.

9.TO STOP THE ENGINE: throttle down to slow for a few seconds, then push switch to OFF. Remove any hearing protection and listen for all moving parts to come to a complete stop. The flywheel in the power head will coast for a few seconds after the engine is shut off before actually stopping.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Z2-7 Collection System Operator’s Manual Models Parts Manual Index Operators Guide SpecificationsFeatures and Controls Auxiliary Engine Features and Controls Spindle Drive General Information Operation Unpacking Instructions Assembly InstructionsAttaching the Heat Shield If installing a spindle drive assembly, skip to stepAttaching the Engine Mount and Vacuum Assembly Attaching a Spindle Drive Assembly Hose Attachment Pre-Start Check Auxiliary Engine Vacuum Assembly Servicing the EngineStarting the Engine Operating the VacuumPreventative Maintenance Schedule Cleaning and WashingStorage Cleaning Exhaust Screen Engine Service and MaintenanceCaring For Vacuum Hoses Trouble Shooting Guide Assembly Replacement Parts540200853 Top/Frame Assembly Top Assembly Replacement Parts QTY Description Spindle Drive KitDescription QTY Accessories, Auxiliary EngineBoot for Gen Boot for Gen II 72 Deck Hitch Custom Kit for MiniCustom Kit for Gen Custom Kit for Gen II 72 Deck Custom Kit for Gen Custom Kit for iZ Spindle Drive Fan Assembly FAN Cover W/DECALS

540200800 specifications

The Husqvarna 540200800 is a versatile and powerful tool designed for professional landscapers and outdoor enthusiasts alike. This innovative product, a part of Husqvarna's high-quality line-up, stands out due to its combination of advanced features and user-friendly design.

One of the key features of the Husqvarna 540200800 is its robust motor, which delivers ample power for a variety of tasks, from trimming and pruning to heavy-duty cutting. This high-performance engine allows for efficient operation, ensuring that users can complete their jobs quickly and effectively.

The design of the Husqvarna 540200800 emphasizes ergonomics, making it comfortable to operate for extended periods. The adjustable handle allows users to modify the angle and length to suit their height and working style, reducing fatigue during long sessions. Additionally, the lightweight structure ensures maneuverability, allowing users to navigate through tight spaces with ease.

Husqvarna has incorporated several cutting-edge technologies into the 540200800, enhancing its performance and reliability. The X-Torq engine technology significantly reduces fuel consumption and emissions, making it more environmentally friendly while ensuring that users can operate for longer without frequent refueling. Furthermore, the Smart Start feature ensures hassle-free starting, minimizing the effort needed to get the machine up and running.

Another notable characteristic of the Husqvarna 540200800 is its durability. Built with high-quality materials and engineered for tough outdoor conditions, this tool is designed to withstand demanding use. Its rugged construction ensures longevity, making it a sound investment for professional users who rely on their equipment day in and day out.

The Husqvarna 540200800 also features a variety of attachments that can be easily swapped out, making it an adaptable tool for various tasks. From edging to blowing, this system allows for efficient handling of different landscaping jobs without the need for multiple pieces of equipment.

In summary, the Husqvarna 540200800 is a top-tier tool that combines power, versatility, and user-friendly design. Its advanced technologies, high-performance engine, and ergonomic features make it an essential asset for anyone looking to maintain a pristine outdoor space. With this tool in hand, users can expect exceptional results and a smoother workflow, whether for personal use or professional landscaping.
Top Page Image Contents