Multipoint 75/100, Features and benefits

04Features and benefits

Multipoint 75/100

Multipoint 75/100 are ideal for commercial applications such as cloakrooms, kitchens or washrooms, where a single heater is required to service multiple draw-offs. Both products may also be used for single point showering and are available with 6kW rating (2 x 3kW elements) for use in locations where faster hot water recovery is required.*

As with all unvented units above 15 litres, it is a Building Regulation requirement that installers are competent to install Multipoint 75 and 100 litre units. This normally means having successfully completed a course in unvented systems.

For details on training courses call 0845 600 7402.

75 and 100 litre capacities

Choice of 3.0kW or 6.0kW rating

Factory-fitted temperature and pressure relief valves

Twin heavy gauge copper inner containers

Replaceable long life alloy sheathed elements

Adjustable thermostats 5°C to 75°C max.

Suitable replacement for Cistern-type water heaters where improved water flow required

CFC/HCFC free (ODP zero) insulation GWP 3.1 (Global Warming Potential)

Element ‘On’ indicator

No anodes to inspect or replace

Suitable for use with any standard mixers or taps

Fitted with 1 metre of 3-core cable

Comprehensive installation instructions

BEAB and kiwa approved

Five year on-site parts and labour inner container guarantee

Items supplied factory fitted to all units

Expansion vessel

Pressure relief (expansion) valve

Temperature & pressure relief valves

Items supplied loose

Combined pressure-reducing valve with built-in strainer

Tundish

Mounting brackets

Multipoint 75/100 selection matrix

	Capacity	Basins
	75	5 to 8
100		8 to 10

N.B. Figures are for guidance only, the Heatrae Sadia Specifier Advice team should be contacted to discuss requirements for specific sites.

*Depending on demand, increased effective capacity and levels of user protection can be achieved by the use of Heatrae Sadia's thermostatic blending valve Pack U3 or U7 (See page 6).