Herrmidifier Co G-200/300 manual Installation

Page 7

Installation

See installation instructions on the provided mounting template

Read the instructions in the furnace installation manual carefully before attempting installation or operation of the humidifier. Failure to follow these instructions may result in improper installation and therefore, void the manufacturer’s warranty.

WARNING

Improper electrical wiring can cause personal injury, death, or property damage. Local codes require that the unit be installed by a properly qualified HVAC technician or electrician.

Some furnaces provide 120VAC auxiliary terminals that may be used to power the humidifier. Since these auxiliary terminals are interlocked with the fan, no separate fan interlock relay is required in the humidistat circuit depending on the furnace model. These terminals are marked HTG.Acc/Neutrals. Acc/Neutral or Hum-H/Hum-N.

When connected to these furnaces using 120VAC auxiliary terminals interlocked to the furnace fan, connect the primary of the supplied 120/24VAC transformer to the auxiliary terminals on the furnace. Connect the secondary of the transformer to the unit pigtails and SPST humidistat provided. The humidifier will then turn on whenever the furnace fan is running and there is a call for humidity.

For systems without 120VAC or 24VAC auxiliary terminals, systems with multi-speed blowers or non-120VAC systems, the switch contacts of a separate SPST-NO fan interlock relay is required to be wired in series with the humidistat switch. Depending on the installation and furnace manufacturer the coil for this relay could be:

Wired in parallel with the coil of the NO fan relay, typically 24VAC.

Wired in parallel with the common and heating speed tap of the units blower typically 120VAC or 240VAC.

An inductively coupled current sensing relay on the common of the units blower.

5

Image 7
Contents 200/300 Duct Mount Bypass Humidifier Table of Contents Introduction IntroductionSpecifications SpecificationsAir Tightness of Home This chart uses A.R.I. standard designationsCapacity Selection Guide OperationStart Up Recommended Relative Humidity Levels Vs. TemperatureInstallation Mounting Locations To Inspect and Clean the Fluid Restrictor MaintenanceMaintenance of Your Humidifier To Inspect and Clean the Conical Mesh Water FilterEnd of Heating Season Shut Down To Inspect and Replace the Evaporator PadHumidifier is running all the time. Is this normal? TroubleshootingTroubleshooting Description of Parts Description Model G-200 300 Parts listUnit Diagram Humidifier Limited Two Year Warranty Warranty

G-200/300 specifications

The Herrmidifier Co G-200/300 is an advanced humidification solution designed for both commercial and residential applications, ensuring optimal indoor air quality and comfort. This innovative system stands out in the market due to its modern technologies and superior features that address the needs of today's environment.

One of the standout features of the G-200/300 is its high-capacity output, which can efficiently manage humidity levels across larger spaces. With a robust humidifying capacity, it caters to diverse environments, from offices and retail spaces to residential areas, providing a comfortable atmosphere for occupants. Its adjustable settings allow users to customize humidity levels according to personal preferences or specific requirements, ensuring a personalized experience.

The G-200/300 employs an advanced microprocessor control system that simplifies operation and enhances efficiency. This system allows for precise monitoring and adjustment of humidity levels, making it easier for users to maintain optimal conditions without manual intervention. Additionally, the unit’s digital display provides real-time feedback on performance metrics, such as humidity levels, temperature, and operational status, ensuring informed decision-making.

Energy efficiency is another hallmark of the Herrmidifier G-200/300. Designed with energy-saving technologies, it minimizes power consumption while maximizing performance. This results in lower utility costs and a more sustainable operation. The unit's low-water shutdown feature further enhances safety by automatically turning off the system if the water supply is low, preventing damage and ensuring longevity.

The design of the G-200/300 also emphasizes user-friendly maintenance. It features easy-access components for straightforward cleaning and servicing, which helps to maintain peak performance and extend the lifespan of the unit. The filter system is designed for easy replacement, ensuring that the air remains fresh and free from contaminants.

Constructed from high-quality materials, the Herrmidifier G-200/300 is built to withstand the rigors of daily use, making it a reliable addition to any environment. Its sleek design allows it to blend seamlessly with various decors, while its compact size ensures it can be placed in areas with limited space.

In conclusion, the Herrmidifier Co G-200/300 represents a leap forward in humidification technology. With its high capacity, advanced controls, energy efficiency, and user-friendly design, it stands as an excellent choice for anyone looking to enhance indoor air quality and comfort. This system effectively meets the diverse needs of modern users, making it a valuable investment for both personal and professional spaces.