Hisense Group KF 346GWE Transmitter HR. Timer button High Power button, Timer ON/OFF button

4.Introduction of the Remote control Unit

SENSOR

Transmitter

1 小时

x

1 HR. TIMER button

HIGH POWER button

FLAP button

TIMER ON/OFF button

TIMER SET/CANCEL

button

A/C SENSOR button

	AUTO	SET TEMP
			C
	1HOUR
		HOUR	AUTO
		ON
		OFF	AUTO
1HR	ON/OFF		TEMP
HIGH
POWER
FLAP			MODE
ON	关	FAN SPEED
	OFF
预SET约	CANCEL		SLEEP
BATTERY	A/C SENSOR		ACL

Display

TEMP.setting button

ON/OFF button

MODE selector button

FAN SPEED

selector button

NIGHT SETBACK button

ACL button

(Cover closed)

Battery compartment

(pull off the cover to expose the batteries.)

NOTE

The illustration above pictures the remote control unit after the cover has been lowered and removed.

Transmitter	When you press the buttons on the remote control unit,the			mark appears in
	the display to transmit the setting changes to the receiver in the air conditioner.
SENSOR	A temperature sensor inside		the remote control unit	senses the room
	temperature.
Display	Information on the operating conditions is displayed while the remote control
	unit is switched on. If the unit is turned off, only the mode that was set
	previously is still displayed.
SLEEP	For details, see“Night Setback Mode”. When you press this button, in the
	HEAT, DRY or COOL mode, the		mark appears in the display, the remote
button
	control unit will automatically adjust the set temperature to save energy.
TEMP. Setting buttons	Press the	button to increase the set temperature.
	Press the	button to reduce the set temperature.
ON/OFF operation	This button is for turning the air conditioner on and off.
button

6