Graco Inc 233757 important safety instructions Pressurized Equipment Hazard

Page 5

Warning

WARNING

PRESSURIZED EQUIPMENT HAZARD

Spray from the gun, hose leaks, or ruptured components can splash fluid in the eyes or on the skin and cause serious injury.

Do not point the gun at anyone or at any parts of the body.

Do not stop or deflect leaks with your hand, body, glove, or rag.

Follow the Pressure Relief Procedure on page 11 whenever you are instructed to relieve pressure; stop spraying; clean, check, or repair the equipment; and install or clean the spray nozzle.

Tighten all fluid connections before operating the equipment.

Check the hoses, tubes, and couplings daily. Replace worn, damaged, or loose parts immediately. Permanently coupled hoses cannot be repaired; replace the entire hose.

TOXIC FLUID HAZARD

Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin, inhaled, or swallowed.

Know the specific hazards of the fluid you are using. Read the fluid manufacturer’s warnings.

Store hazardous fluid in an approved container. Dispose of hazardous fluid according to all local, state and national guidelines.

Always wear protective eyewear, gloves, clothing and respirator as recommended by the fluid and solvent manufacturer.

309474K

5

Image 5
Contents Model 233757 Shown II 2 G Low PressureContents Key to Model Designation List of ModelsEquipment Misuse Hazard Pressurized Equipment Hazard Back Pressure Regulators IntroductionFluid Pressure Regulators Fluid Inlet from gunFluid Inlet from pump Valve ball and seat Adjustment screw Spring Diaphragm Valve plungerFluid Outlet to gun Air inlet Diaphragm Fluid Outlet To gun Valve plungerAir to gun Fluid Air to pump InstallationAir to Fluid RegulatorAir to Pump Gun G a BAir Fluid Air to Back Pressure Regulator Air to GunAir to Fluid Regulator Fluid to gunAdjusting the Regulator Pressure Relief ProcedureOperation Flush Before First UseProblem Cause Solution TroubleshootingFlushing MaintenanceCleaning and Repair Description PartsMechanical Fluid Pressure Regulators Part Nos Mechanical Back Pressure Regulators Part Nos Part No. Description TI11249a Description Qty Pneumatic Back Pressure Regulators Part Nos Category Data Technical DataGauge Accessory GaugesFlow Rate Data Thread Dimension a Mounting DimensionsMounting Dimensions 309474K For Graco Canada Customers Graco Warranty