Freecom Technologies RCS-M2000T, RCS-M2000U operation manual Control Panel, Mode

THE CONTROL PANEL

7 6

1 2

3 4 5

1.POWER ON/OFF

Easy push-button control switch to turn the unit ON and OFF.

2.MODE

There are four different fan speed settings:

•FAN—Fan only (no cooling)

•HI—High fan speed with cooling setting

•ME—Medium fan speed with cooling setting

•LO—Low fan speed with cooling setting.

3.THERMO CONTROL

The Thermo Control automatically defaults to a temperature of approximately 75ÞF when the unit is started. Adjust left button for colder air and right button for warmer air. Each press of either button adjusts the temperature control by approximately 3.5ÞF.

4.AUTO SWING

Choose between fixed position or oscillating (70 degrees) vertical louvers.

5.TIMER

Adjustable 9 hour timer can be programmed to turn off air conditioner after 1, 2, 3, 4, 5, 6, 7, 8, or 9 hours.

6.FULL TANK INDICATOR

The full tank indicator will automatically light and 8 "beeps" will sound when the water tank is full.

7.COMPRESSOR "ON" INDICATOR

The "COMP. ON" light will turn on when the compressor is operating. The light will turn off when the compressor stops. This unit is equipped with a special safety time delay feature. The compressor (cooling mechanism) may be delayed for up to five minutes. This safety feature prevents damage to the compressor.

7