FilterStream HW_A710 instruction manual Replacing the Filter, AIR Filter

Page 15

Replacing the Filter

Please follow these steps to replace your AirTamer®

AIR FILTER.

1.Turn the AirTamer® off by pressing the POWER BUTTON and unplugging the unit from the electrical outlet.

2.Remove the AIR EXIT GRILL by pushing down on the AIR EXIT GRILL TABS (2a) and pulling the AIR EXIT GRILL (2b) away from the unit.

3.Remove the AIR FILTER by firmly gripping the sides of the AIR FILTER and pulling the AIR FILTER out of the unit.

4.Mark the suggested month of AIR FILTER replacement on the new AIR FILTER by checking off the appropriate month (e.g. If it is suggested that the AIR FILTER be replaced in twelve (12) months and you install the AIR FILTER on January 1st, put a check in the box beside the letter representing the month to replace – in this case January, for the next January.).

5.Insert the new AIR FILTER by placing the bottom of the AIR FILTER inside your AirTamer® and pushing it past the large front rubber tab. Then push the top of the AIR FILTER past the large front rubber tab at the top of the unit.

Note:

Make sure that the AIR FLOW ARROWS face towards the front of the unit.

6.Replace the AIR EXIT GRILL.

7.Press and hold down the CHANGE FILTER LIGHT BUTTON for three (3) seconds to reset the CHANGE FILTER memory.

2a

2b

3

5

6

7

makes life better!

Page 13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Ultra High Efficiency Air Purifier Professional Series Table of Contents About Your AirTamer Important Safety Instructions Important SafeguardsMakes life better FCC Information Fan Speed Timer 2, 4, 6, 8 Power Cord Features and ControlsFront Air Exit Grill Tabs Control Panel Power Delay OnRelaxing Lavender Rear AirTamer Germ-OdorUnit Set-Up Set-Up & OperationReplace the AIR Exit Grill AIR Filter FrameFan Speed Auto Off/Delay On TimerPower On/Off Using the Auto Off TimerUsing the Delay On Timer Your AirTamer A710 FiltersUltra High Performance Pleated Air Filter Germ-Odor-Virus Protection Air Filter Change Filter LightFilter Frame Resetting the Change Filter LightAIR Filter Replacing the FilterUsing Alternative Non-AirTamer Air Filters Aroma Cartridge Compartment How To UseAirTamer Aroma System To Order Aroma Cartridge RefillsAbout Dr. Rachel Herz Rachel S. Herz, Ph.D., Expert in the Psychology of SmellBrown University Medical School LED Brightness Control Issue Resolution Troubleshooting GuideFilter How often do I need to replace the AIR FILTER? Questions & AnswersYear Limited Warranty Art 100 A200

HW_A710 specifications

The FilterStream HW_A710 is a state-of-the-art air purification system designed to improve indoor air quality using innovative filtration technologies. This advanced device is ideal for residential, commercial, and industrial environments, ensuring that the air you breathe is free from harmful pollutants, allergens, and odors.

One of the main features of the HW_A710 is its multi-stage air filtration system. It employs a pre-filter, HEPA filter, and activated carbon filter, working synergistically to capture a wide range of airborne particles. The pre-filter effectively captures larger particles like dust, pet hair, and lint, extending the life of the HEPA filter. The HEPA filter is designed to capture 99.97% of particles as small as 0.3 microns, including pollen, smoke, and mold spores. The final stage, the activated carbon filter, is essential for removing odors and volatile organic compounds (VOCs) from the air, ensuring a fresh and clean environment.

The HW_A710 also utilizes advanced technologies to enhance its overall effectiveness. One such technology is the use of a built-in air quality sensor that continuously monitors the air quality in real-time. This smart feature adjusts the fan speed automatically based on the detected pollutant levels, optimizing energy consumption while providing efficient purification.

In addition, the HW_A710 is equipped with a user-friendly control panel that allows for easy operation. Users can select from different fan speeds, set timers, and even switch to a silent mode for nighttime use. The device is designed with a sleek and modern aesthetic, making it a stylish addition to any room.

Portability is another key characteristic of the HW_A710. It is lightweight and comes with integrated handles, allowing users to move it from room to room with ease. With a coverage area of up to 1,000 square feet, it is suitable for large living spaces, offices, or commercial settings.

The FilterStream HW_A710 is also designed with energy efficiency in mind, meeting stringent energy consumption standards. This ensures that not only do you benefit from cleaner air, but you also reduce your carbon footprint.

In conclusion, the FilterStream HW_A710 offers a comprehensive and effective solution for air purification. With its multi-stage filtration system, advanced air quality monitoring, user-friendly features, and energy-efficient design, it stands out as a top choice for anyone looking to improve their indoor air quality.
Top Page Image Contents