FilterStream HW_A710 instruction manual Troubleshooting Guide, Issue Resolution

Page 20

Troubleshooting Guide

Issue

Resolution

 

 

CHANGE

This may mean that it is time to replace the AIR FILTER

FILTER LIGHT

installed in your unit. This is dependant upon which

is orange.

model of air filter you are using.

 

Once you replace the AIR FILTER in your unit, press and

 

hold the CHANGE FILTER LIGHT BUTTON for three (3)

 

seconds. The lights on the unit will then flash once, and

 

the CHANGE FILTER LIGHT BUTTON will change back

 

to green and begin counting down another six (6)

 

month period of time.

 

 

CHANGE

This means that you have run the unit for two (2) weeks

FILTER LIGHT

after the CHANGE FILTER LIGHT has changed to

is pulsing

orange and you must replace the AIR FILTER soon (or

orange.

reset the CHANGE FILTER LIGHT if you are using a 12

 

month filter).

 

Once you replace the AIR FILTER in your unit, press and

 

hold the CHANGE FILTER LIGHT BUTTON for three (3)

 

seconds. The lights on the unit will then flash once, and

 

the CHANGE FILTER LIGHT BUTTON will change back

 

to green and begin counting down the life on your new

 

AIR FILTER.

 

 

The LED

To turn the lights on the AirTamer® DOWN or OFF,

lights on the

press and hold the POWER button while the unit is

AirTamer® are

on. The unit will then cycle through its 16 brightness

too bright.

levels. When you have reached your desired level

I want the

of brightness, release the POWER button. The unit

will stay at that brightness level until you readjust it

lights on the

following the same steps.

unit to be off.

Note:

 

 

After pressing any button on the unit, the brightness

 

level will go to High and then return to your chosen

 

brightness level after four (4) seconds.

 

 

Page 18

AirTamer®

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Ultra High Efficiency Air Purifier Professional Series Table of Contents About Your AirTamer Important Safeguards Important Safety InstructionsMakes life better FCC Information Features and Controls Front Air Exit Grill Tabs Control Panel PowerDelay On Fan Speed Timer 2, 4, 6, 8 Power CordRear AirTamer Germ-Odor Relaxing LavenderSet-Up & Operation Unit Set-UpAIR Filter Frame Replace the AIR Exit GrillAuto Off/Delay On Timer Power On/OffUsing the Auto Off Timer Fan SpeedUltra High Performance Pleated Air Filter Using the Delay On TimerYour AirTamer A710 Filters Change Filter Light Germ-Odor-Virus Protection Air FilterResetting the Change Filter Light Filter FrameReplacing the Filter AIR FilterUsing Alternative Non-AirTamer Air Filters How To Use AirTamer Aroma SystemTo Order Aroma Cartridge Refills Aroma Cartridge CompartmentBrown University Medical School About Dr. Rachel HerzRachel S. Herz, Ph.D., Expert in the Psychology of Smell LED Brightness Control Troubleshooting Guide Issue ResolutionFilter Questions & Answers How often do I need to replace the AIR FILTER?Year Limited Warranty Art 100 A200

HW_A710 specifications

The FilterStream HW_A710 is a state-of-the-art air purification system designed to improve indoor air quality using innovative filtration technologies. This advanced device is ideal for residential, commercial, and industrial environments, ensuring that the air you breathe is free from harmful pollutants, allergens, and odors.

One of the main features of the HW_A710 is its multi-stage air filtration system. It employs a pre-filter, HEPA filter, and activated carbon filter, working synergistically to capture a wide range of airborne particles. The pre-filter effectively captures larger particles like dust, pet hair, and lint, extending the life of the HEPA filter. The HEPA filter is designed to capture 99.97% of particles as small as 0.3 microns, including pollen, smoke, and mold spores. The final stage, the activated carbon filter, is essential for removing odors and volatile organic compounds (VOCs) from the air, ensuring a fresh and clean environment.

The HW_A710 also utilizes advanced technologies to enhance its overall effectiveness. One such technology is the use of a built-in air quality sensor that continuously monitors the air quality in real-time. This smart feature adjusts the fan speed automatically based on the detected pollutant levels, optimizing energy consumption while providing efficient purification.

In addition, the HW_A710 is equipped with a user-friendly control panel that allows for easy operation. Users can select from different fan speeds, set timers, and even switch to a silent mode for nighttime use. The device is designed with a sleek and modern aesthetic, making it a stylish addition to any room.

Portability is another key characteristic of the HW_A710. It is lightweight and comes with integrated handles, allowing users to move it from room to room with ease. With a coverage area of up to 1,000 square feet, it is suitable for large living spaces, offices, or commercial settings.

The FilterStream HW_A710 is also designed with energy efficiency in mind, meeting stringent energy consumption standards. This ensures that not only do you benefit from cleaner air, but you also reduce your carbon footprint.

In conclusion, the FilterStream HW_A710 offers a comprehensive and effective solution for air purification. With its multi-stage filtration system, advanced air quality monitoring, user-friendly features, and energy-efficient design, it stands out as a top choice for anyone looking to improve their indoor air quality.
Top Page Image Contents