Fantom Vacuum FM740 B Using the Vacuum Cleaner, ON/OFF Switch, Adjusting the Handle

Page 7

USING THE VACUUM CLEANER

ON/OFF SWITCH

Start or stop vacuum cleaner by pushing on the switch.

OFF ON

ON/OFF Switch

ADJUSTING THE HANDLE

The handle of this vacuum cleaner can be set to one of three positions-Upright,Normal,Parallel.Place your foot on either one of the handle release points as shown and pull back on the handle until it releases from its upright position.

Handle Release

Upright position

The handle is normally locked in this position for storage or when using the attachments.

Push the handle forward until it locks.

Normal position

This position is used for normal cleaning.

Parallel position

This position is used for cleaning under furniture.

EDGE CLEANING

This vacuum cleaner is equipped with an "edge cleaning" function for cleaning carpet edges near baseboards and stationary furniture.

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents FM740 B Important Safety Instructions Page Frontrear Names of Each PartAttaching the handle Preparations Before USEReleasing the Power Cord Winding the Power CordInserting the Power Cord Plug Edge Cleaning Using the Vacuum CleanerON/OFF Switch Adjusting the HandleInstall the wand to the hose Using the AttachmentsEmptying the Dust Compartment Power cord from the wall outlet before cleaningCleaning utensil Cleaning the FiltersCleaning and Replacing the Secondary Filters Clearing blockages in the suction hose Replacing the Headlight Lamp Replacement InstructionsReplacement Instructions Replacing the Agitator Removing the Bottom Plate Replacement InstructionsReattaching the Bottom Plate Troubleshooting ONE 1 Year Limited Warranty
Top Page Image Contents