Fantom Vacuum FM780 instruction manual Removing the Bottom Plate, Reattaching the Bottom Plate

Page 15

REPLACEMENT INSTRUCTIONS

REMOVING THE BOTTOM PLATE

Set the vacuum cleaner to the

1 parallel position and turn it over.

2 Unscrew the two screws as shown.	OPEN

Remove the bottom plate by pulling

3 the tabs as illustrated.

Pull here

Bottom Plate

REATTACHING THE BOTTOM PLATE

Insert the projection on the bottom plate 1 into the groove on the nozzle head

and set the bottom plate in place.

Bottom Plate

Projection

Groove

3 Set the two screws to its original place.

CLOSE

2 Push the bottom plate as shown.

Press

Press

Turn the vacuum over and place in the

4 upright position.

Nozzle Head

Height Adjustment Lever

14

Image 15

Contents FM780 Read ALL Instructions Before Using this Vacuum Cleaner Important Safety InstructionsPage ME O F E a C H P a R T Attaching the handle Preparation Before USEWinding the Power Cord Releasing the Power CordInserting the Power Cord Plug Using the Vacuum Cleaner ON/OFF SwitchAdjusting the Handle US ING T HE VA C UUM C L E a NE R Wand Crevice Tool Upholstery Tool Suction Hose Dusting Brush Emptying the Dust Compartment Power cord from the wall outlet before cleaningCleaning Utensil Cleaning the FiltersClearing blockages in the suction hose Replacing the Headlight Lamp Replacement InstructionsReplacing the Flat Belt Reattaching the Bottom Plate Removing the Bottom PlateProblem Cause Remedy TroubleshootingONE 1 Year Limited Warranty