Fantom Vacuum FM780 Using the Vacuum Cleaner, ON/OFF Switch, Adjusting the Handle

Page 7

USING THE VACUUM CLEANER

ON/OFF SWITCH

Start or stop vacuum cleaner by pushing on the switch.

ADJUSTING THE HANDLE

The handle of this vacuum cleaner can be set to one of three positions -Upright, Normal or Parallel. Place your foot on handle release lever as shown and pull back on the handle until it releases from its upright position.

Handle Release Lever

Upright position

The handle is normally locked in this position for storage or when using the attachments.

Push the handle forward until it locks.

Normal position

This position is used for normal cleaning.

Parallel position

Handle Release Lever

This position is used for cleaning under

furniture.

6

Image 7

Contents FM780 Read ALL Instructions Before Using this Vacuum Cleaner Important Safety InstructionsPage ME O F E a C H P a R T Attaching the handle Preparation Before USEReleasing the Power Cord Winding the Power CordInserting the Power Cord Plug ON/OFF Switch Using the Vacuum CleanerAdjusting the Handle US ING T HE VA C UUM C L E a NE R Wand Crevice Tool Upholstery Tool Suction Hose Dusting Brush Emptying the Dust Compartment Power cord from the wall outlet before cleaningCleaning Utensil Cleaning the FiltersClearing blockages in the suction hose Replacing the Headlight Lamp Replacement InstructionsReplacing the Flat Belt Reattaching the Bottom Plate Removing the Bottom PlateProblem Cause Remedy TroubleshootingONE 1 Year Limited Warranty