Extending the Telescopic Tube

OPERATING INSTRUCTIONS cont.

OPERATING INSTRUCTIONS

Emptying the Dust Cup Container

and Cleaning / Changing the Non-

Woven Pre-Filter, HEPA Filter &

Debris Screen

Warning: Always unplug the unit from electrical outlet before opening the Dust Cup (container).

Important: Do NOT use the vacuum without the HEPA filter in place.

Warning: After each Use - Always remove the Filter Assembly and the Dust Cup Cover with the Debris Screen, then vigorously “TapClean” HEPA Filter and clean Debris Screen until no more dust can be removed.

IMPORTANT, Please Note : The “TapClean” HEPA Filter will stop most of the tiniest dust particles from re-entering the air you breathe. In fact it stops 99.97% of all particles as small as 0.3 microns - many times smaller than a human hair!!! Because of this incredible filtration performance, the HEPA Filter will quickly accumulate, inside the white filter folds, many fine dust particles that are difficult to see but which will eventually block or reduce your suction power - if not cleaned properly.

1.To remove the dust cup container, first press on the dust cup release button (1) that is located on the dust cup handle and at the same time press on the dust cup release button

(2) that is on the side of the upper housing. See illustration below. Then pull the dust cup container out.

Dust

Cup

Release

Button 1

Dust

Cup

Release

Button 2

2.To empty the dust cup container, press on the trap door release button that is on the back side of the dust cup container.

3.The HEPA filter is located underneath the dust cup container. (See illustration.) Remove the non-woven pre-filter. Remove the HEPA filter, hold the edges and pull it out slowly.

Non-Woven

Pre-Filter

HEPA

Filter

4.Hold the HEPA filter by the edges and vigorously “TapClean” the HEPA Filter dirty side down on a hard, flat surface until no more dust is observed falling out from between the pleats of the filter.

5.Rinse the non-woven pre-filter and let d\air dry completely for 24 hours.

6.Insert the non-woven pre-filter.

7.Reinstall the HEPA filter in the vacuum.

8.To Separate the Debris Screen from the dust cup, hold the dust cup in one hand and turn the dust cup cover counter clockwise and pull apart. To clean the Debris Screen, we recommend that

you rinse it under lukewarm running water to remove the dirt that accumulates on it, but

always allow 24 hours to air dry before inserting back into the vacuum.

WARNING: Always remove the power plug from the wall outlet before assembling or removing accessories.

Push the plastic button and pull out the smaller tube. See illustration below.

INSERTING THE TELESCOPIC TUBE INTO THE MAIN UNIT

•Insert the telescopic tube into the hole next to the dust cup handle. Make sure that the slot in the handle fits correctly into the opening. (See illustration.)

•To remove the telescopic tube, press the telescopic tube release button and pull the tube up.

ATTACHING THE FLOOR BRUSH TO THE MAIN UNIT

•Insert the floor brush into its location, in the direction of the arrow.

•To remove the floor brush from the main unit, press on the floor brush release button and pull the floor brush out.

ATTACHING THE HOSE TO THE MAIN UNIT

•Hold the end of the hose (see illustration below).

•Insert the hose into the hose connector (see arrow in illustration).

FS801 specifications

The Fantom Vacuum FS801 is a powerful and versatile cleaning appliance designed to meet the needs of modern households. The FS801 stands out in the crowded vacuum cleaner market thanks to its innovative features and cutting-edge technologies, making it a reliable choice for homeowners seeking efficiency and performance.

One of the main features of the FS801 is its robust suction power. Equipped with a high-performance motor, the vacuum offers strong suction capabilities that effortlessly tackle dirt, dust, and pet hair on various surfaces. Whether cleaning carpets, hardwood floors, or upholstery, the Fantom FS801 ensures a thorough cleaning experience, making it an ideal choice for families with pets or children.

Another impressive aspect of the FS801 is its advanced filtration system. The vacuum employs a multi-stage filtration process that effectively captures allergens and fine particles. This feature is particularly beneficial for allergy sufferers, as it helps maintain cleaner indoor air quality by trapping dust, pollen, and other irritants. Additionally, the washable HEPA filter allows for easy maintenance, ensuring long-lasting filtration performance.

The FS801 is designed with user convenience in mind, featuring a lightweight and ergonomic design that makes it easy to maneuver around the home. Its compact build also allows for convenient storage, making it an attractive option for those with limited space. The vacuum comes with several attachments, including a crevice tool, dusting brush, and upholstery nozzle, enhancing its versatility in tackling various cleaning tasks.

One of the standout technologies in the Fantom FS801 is its swivel steering capability, which allows for smooth navigation around furniture and tight corners. This feature not only enhances maneuverability but also reduces the effort required to clean hard-to-reach areas.

Additionally, the FS801 boasts a long power cord, providing an extended cleaning radius that minimizes the need for frequent outlet changes. Coupled with its generous dustbin capacity, users can clean larger areas without interruption.

In conclusion, the Fantom Vacuum FS801 is a reliable and feature-rich vacuum cleaner that combines powerful suction, advanced filtration, and user-friendly design. Its innovative technologies and versatile attachments make it an excellent choice for those seeking an effective cleaning solution for their homes. Whether you are dealing with everyday messes or more challenging debris, the FS801 delivers a superior cleaning experience.