Air Driven Turbo Brush, ON/OFF Switch | Fantom Vacuum FS801 instruction

OPERATING INSTRUCTIONS cont.

WINDING & UNWINDING THE POWER CORD

This vacuum cleaner is equipped with a convenient cord storage feature. The power cord winds around the two cord holders at the back of the unit. The bottom one has a quick cord release feature.

Turn the cord hook to the left or the right to remove the power cord. See illustration at right.

ON/OFF SWITCH

•The On/Off switch has two different positions.

•Push on the "I" side to turn the vacuum ON.

•Push on the "O" side to turn the vacuum OFF.

=OFF

= ON

USING THE UNIT AS AN UPRIGHT

•Unwind the power cord and plug into the 120V outlet.

•Push down on the locking button to adjust the height of the telescopic handle.

NOTE: When vacuuming deep pile carpets or hard to vacuum carpets, lower the angle of the telescopic handle (see illustration at

right) for easier maneuverability.

USING THE UNIT AS A HAND VACUUM

•Press the telescopic tube release button to remove the telescopic tube. (See page 4)

•Press the floor brush release button to remove the floor brush. (See page 4)

•Attach the shoulder strap to the shoulder strap attachment point. (See illustration below.)

•Attach the crevice tool or the dusting brush to the end of the hose.

WARNING

After extended use, the body of the vacuum cleaner may become hot. When using the unit with the shoulder strap, the unit will touch the body of the user. Therefore, make sure that the unit body is cool before you use with the shoulder strap. If during use, the vacuum gets too warm, allow it to cool before continuing to use.

Crevice Tool

For radiators, crevices, corners, baseboards and

between cushions.

Dusting Brush

The dusting brush is used for the furniture, venetian blinds, books, lamp shades and shelves.

Intelli-SenseTMFilter Monitor

When the Intelli-SenseTMFilter Monitor lights up, it means that the dust cup is full or the HEPA filter, non-woven pre-filter or debris screen needs cleaning. You must empty the dust from the dust cup and clean the HEPA filter, non- woven pre-filter and debris screen

Air Driven Turbo Brush

Using The Unit With Air Driven Turbo Brush

The efficiency of your air driven turbo brush depends on the bristle brush rotating at high speed. Strong air suction is needed to accomplish this. In order to ensure that maximum air suction is maintained, please read the following instructions:

1.Empty the dust cup frequently.

2.Always shake out the HEPA filter and clean the non-woven pre-filter and debris screen when emptying the dust cup container.

3.Ensure that the rotating brush is kept free of hair and string which may accumulate and decrease brush performance.

4.Keep Air Driven Turbo Brush turbine free of dirt and foreign matter. (See illustration for cleaning instructions.)

Attaching the Air Driven Turbo Brush to the Flexible Hose

To use the air driven turbo brush to clean upholstery:

1.Remove the flexible hose from the hose connector. (See below)

2.Push the air driven turbo brush onto the end of the flexible hose as far as it will go.

Important: In order to ensure that maximum air suction is maintained, empty the dust cup frequently and shake out the HEPA filter and clean the non- woven pre-filter and debris screen at the same time. Ensure that the rotating brush is kept free of hair and string which may accumulate and decrease brush performance.

Cleaning Air Driven Turbo Brush

Locking Latch

Tilt

Upwards

Turbine

From time to time, the turbine of your turbo brush will require cleaning. To do this:

1.Remove the turbo brush from the hose or extension tube.

2.Slide locking latch forward then tilt the top housing of the brush upwards. The top housing is hinged and will tilt up approximately 45° only.

3.There may be some dust, lint, hair, etc on the turbine wheel. Remove as much of this as possible.

4.You may also use the unit’s hose with crevice tool attached and use the vacuum to remove any additional debris from the turbine.

5.Ensure that the turbine wheel moves freely by rotating it with your finger. If the turbine does not rotate, call Customer Service for help.

6.Once clean, close the top cover of the turbo brush and slide the locking latch toward the rear of the brush to lock.

5right away.

FS801 specifications

The Fantom Vacuum FS801 is a powerful and versatile cleaning appliance designed to meet the needs of modern households. The FS801 stands out in the crowded vacuum cleaner market thanks to its innovative features and cutting-edge technologies, making it a reliable choice for homeowners seeking efficiency and performance.

One of the main features of the FS801 is its robust suction power. Equipped with a high-performance motor, the vacuum offers strong suction capabilities that effortlessly tackle dirt, dust, and pet hair on various surfaces. Whether cleaning carpets, hardwood floors, or upholstery, the Fantom FS801 ensures a thorough cleaning experience, making it an ideal choice for families with pets or children.

Another impressive aspect of the FS801 is its advanced filtration system. The vacuum employs a multi-stage filtration process that effectively captures allergens and fine particles. This feature is particularly beneficial for allergy sufferers, as it helps maintain cleaner indoor air quality by trapping dust, pollen, and other irritants. Additionally, the washable HEPA filter allows for easy maintenance, ensuring long-lasting filtration performance.

The FS801 is designed with user convenience in mind, featuring a lightweight and ergonomic design that makes it easy to maneuver around the home. Its compact build also allows for convenient storage, making it an attractive option for those with limited space. The vacuum comes with several attachments, including a crevice tool, dusting brush, and upholstery nozzle, enhancing its versatility in tackling various cleaning tasks.

One of the standout technologies in the Fantom FS801 is its swivel steering capability, which allows for smooth navigation around furniture and tight corners. This feature not only enhances maneuverability but also reduces the effort required to clean hard-to-reach areas.

Additionally, the FS801 boasts a long power cord, providing an extended cleaning radius that minimizes the need for frequent outlet changes. Coupled with its generous dustbin capacity, users can clean larger areas without interruption.

In conclusion, the Fantom Vacuum FS801 is a reliable and feature-rich vacuum cleaner that combines powerful suction, advanced filtration, and user-friendly design. Its innovative technologies and versatile attachments make it an excellent choice for those seeking an effective cleaning solution for their homes. Whether you are dealing with everyday messes or more challenging debris, the FS801 delivers a superior cleaning experience.