Electrolux CH 700 user manual Mounting accessories included, Wall mounting

Page 13

Installation

Mounting accessories included

1deflector

1chimney support

1reduction flange Ø 125-120 mm

1charcoal filter (already fitted)

8wood-screws 5 x 45 mm (for wall mounting - 2 as spare parts)

8wall plugs Ø 8 mm (for wall mounting - 2 as spare parts)

6washers (2 for chimney support - 2 for lower fixing - 2 as spare parts)

8 metal screws 3,5 x 6,5 (for all fixing except - lower chimney fixing) 2 metal screws 3,5 x 9,5 (lower chimney fixing)

We reserve the right to change specifications and colours as a result of our policy of continuing technological development.

Wall mounting

Disconnect the hood during electrical connection, by turning the home mains switch off.

Mark the wall with a centre line, this will aid mounting procedure (1), position the template so that the mid line printed on the template matches with the centre line previously drawn, the lower side of the template corresponds to the lower side of the hood once mounted (2).

Drill four holes Ø 8mm and fit four wall plugs (3).

Drill two holes Ø 8mm on the upper side close to the ceilling (4) use the chimney support as a template, check that the mid of the chimney support corresponds to the mid of the centre line previously drawn, fit two wall plugs.

Note: ONLY in case the hood is to be used in filter version, mount the deflector E on the chimney support and the connection flange G with two screws each (5).

Put the chimney support close to the ceiling to the vertical of the cooking place, use the centre line (1) for easy positioning, mark two holes onto the wall and drill, then insert two wall plugs and fix the chimney support with two screws and washers (6).

Screw two screws (do not tighten completely, leave them so that can be used to hang the hood), hang the hood (7), remove the grease filters and fix it definitively with two screws and washers (8), check that all four screws are securely tightened.

Fit an exhaust pipe (9) to connect the outlet hole D of the hood to the connection flange G of the deflector E (Filter version) or to the outside (Extractor version).

Make electrical connection (10), but leave the hood disconnected from the mains supply.

Place the cable clamp in the corresponding housing (11).

Fix the control panel to the rear bracket on the lower￿￿section of the chimney with two screws (12 - Cable must be positioned upwards to have correct position of control switches).

Position the chimney and secure them in place, first up (13a) to the chimney support (13b) .

Then slide the chimney downwards making sure the cable clamp (step 11) is seated in the housing on chimeny (14).

Fix the lower section of the chimney with two screws from the inside of the hood (15).

Refit the grease filters, connect the hood the the home general electric panel and check if the hood work properly.

Image 13
Contents Page Contents For the installer Safety warningsFor the user Extractor version Description of the ApplianceRecirculation Version Control PanelCorrect ventilation Cleaning the hood Maintenance and CareMetal grease filter Removing the metal grease filterChanging the light bulb Charcoal filterSomething Not Working Special accessories08705 929 Service and Spare PartsStandard guarantee conditions Guarantee ConditionsEuropean Guarantee ExclusionsTechnical Details InstallationUnpacking FittingWall mounting Mounting accessories included13a 13b Page Electrolux plc LI12YD Ed /05

CH 700 specifications

The Electrolux CH 700 is a state-of-the-art vacuum cleaner designed to cater to the cleaning needs of modern households. Its innovative technology, powerful performance, and versatile features make it a favorite among homeowners looking for efficiency and convenience.

At the heart of the CH 700 is its advanced motor technology, delivering strong suction power that effectively captures dirt, dust, and allergens from various surfaces. This powerful motor ensures that even embedded particles are removed, providing a deep clean that promotes a healthier living environment. Whether on carpets, hardwood floors, or tiles, the CH 700 adapts seamlessly, ensuring pristine cleanliness across different types of flooring.

One of the standout features of the Electrolux CH 700 is its lightweight, ergonomic design, which allows for easy maneuverability around the home. Weighing in at just under 3 kg, it can be easily lifted and transported from room to room, making cleaning less of a chore. Additionally, its compact size means that it can be stored in small spaces without hassle.

The CH 700 is equipped with a multi-floor cleaning system that incorporates adjustable suction control, allowing users to switch between different floor types effortlessly. The device also boasts an advanced filtration system that captures 99.9% of fine particles, including allergens, ensuring that the air quality in the home remains unpolluted.

Moreover, this model features a bagless design, eliminating the inconvenience of replacing vacuum bags. Its large dust container can be easily emptied with the touch of a button, simplifying maintenance. The washable pre-motor filter further extends the lifespan of the vacuum and maintains its performance over time.

Another notable aspect of the Electrolux CH 700 is its quiet operation, enabling users to clean without disturbing the peace in their homes. This is particularly valuable for families with small children or for those who live in shared spaces.

In terms of accessories, the CH 700 comes with a range of useful tools designed to tackle specific cleaning tasks. From crevice tools for tight spaces to upholstery brushes for furniture, these attachments enhance the versatility of the vacuum, making it suitable for various cleaning applications.

Overall, the Electrolux CH 700 stands out for its powerful suction, user-friendly design, and efficient cleaning capabilities, making it an excellent choice for those looking to maintain a clean and healthy living space.