Electrolux CH 700 user manual Safety warnings, For the installer

Page 3

Safety warnings

For the installer

When used as an extractor unit, the hood must be fitted with a 150mm diameter hose. Attention: The hose is not supplied and must be purchased separately.

Should there already be a pipe of diameter 125 or 120 mm that ducts to the outside through the walls or roof, it is possible to use the 150/125- 120 mm reduction flange provided. In this case the hood will be slightly noisier.

When installing the hood, make sure you respect the following minimum distance

from the top edge of the cooking hob/ring

surfaces:

 

 

electric cookers

600

mm

gas cookers

700

mm

The hood can be installed above these heights but for optimum performance it should be installed at the distance quoted for the appropriate heat source.

The national Standard on fuel-burning systems specifies a maximum depression of 0.04 mbar in such rooms.

The air outlet must not be connected to chimney flues or combustion gas ducts. The air outlet must under no circumstances be connected to ventilation ducts for rooms in which fuel-burning appliances are installed.

The air outlet installation must comply with the regulations laid down by the relevant authorities.

When the unit is used in its extractor version, a sufficiently large ventilation hole must be provided, with dimensions that are approxi- mately the same as the outlet hole.

National and regional building regulations impose a number of restrictions on using hoods and fuel-burning appliances connected to a

chimney, such as coal or oil room-heaters and

￿

gas fires, in the same room.

 

• Hoods can only be used safely with appliances

 

connected to a chimney if the room and/or flat

 

(air/environment combination) is ventilated from

 

outside using a suitable ventilation hole approxi-

 

mately 500-600 cm2 large to avoid the

 

possibility of a depression being created during

 

operation of the hood.

 

• If you have any doubts, contact the relevant

 

controlling authority or building inspector’s

 

office.

 

• Since the rule for rooms with fuel burning

 

appliances is “outlet hole of the same size as the

 

ventilation hole”, a hole of 500-600 cm2, which

 

is to say a larger hole, could reduce the perfor-

 

mance of the extractor hood.

 

• If the hood is used in its filtering function, it will

 

operate simply and safely in the above conditions without the need for any of the aforementioned measures.

When the hood is used in its extractor function, the following rules must be followed to obtain optimal operation:

short and straight outlet hose

keep bends in outlet hose to a minimum

never install the hoses with an acute angle, they must always follow a gentle curve.

keep the hose as large as possible (preferably the same diameter as the outlet hole).

Failure to observe these basic instructions will drastically reduce the performance and increase the noise levels of the extractor hood.

Image 3
Contents Page Contents For the installer Safety warningsFor the user Extractor version Description of the ApplianceControl Panel Recirculation VersionCorrect ventilation Removing the metal grease filter Maintenance and CareCleaning the hood Metal grease filterChanging the light bulb Charcoal filterSomething Not Working Special accessories08705 929 Service and Spare PartsExclusions Guarantee ConditionsStandard guarantee conditions European GuaranteeFitting InstallationTechnical Details UnpackingWall mounting Mounting accessories included13a 13b Page Electrolux plc LI12YD Ed /05

CH 700 specifications

The Electrolux CH 700 is a state-of-the-art vacuum cleaner designed to cater to the cleaning needs of modern households. Its innovative technology, powerful performance, and versatile features make it a favorite among homeowners looking for efficiency and convenience.

At the heart of the CH 700 is its advanced motor technology, delivering strong suction power that effectively captures dirt, dust, and allergens from various surfaces. This powerful motor ensures that even embedded particles are removed, providing a deep clean that promotes a healthier living environment. Whether on carpets, hardwood floors, or tiles, the CH 700 adapts seamlessly, ensuring pristine cleanliness across different types of flooring.

One of the standout features of the Electrolux CH 700 is its lightweight, ergonomic design, which allows for easy maneuverability around the home. Weighing in at just under 3 kg, it can be easily lifted and transported from room to room, making cleaning less of a chore. Additionally, its compact size means that it can be stored in small spaces without hassle.

The CH 700 is equipped with a multi-floor cleaning system that incorporates adjustable suction control, allowing users to switch between different floor types effortlessly. The device also boasts an advanced filtration system that captures 99.9% of fine particles, including allergens, ensuring that the air quality in the home remains unpolluted.

Moreover, this model features a bagless design, eliminating the inconvenience of replacing vacuum bags. Its large dust container can be easily emptied with the touch of a button, simplifying maintenance. The washable pre-motor filter further extends the lifespan of the vacuum and maintains its performance over time.

Another notable aspect of the Electrolux CH 700 is its quiet operation, enabling users to clean without disturbing the peace in their homes. This is particularly valuable for families with small children or for those who live in shared spaces.

In terms of accessories, the CH 700 comes with a range of useful tools designed to tackle specific cleaning tasks. From crevice tools for tight spaces to upholstery brushes for furniture, these attachments enhance the versatility of the vacuum, making it suitable for various cleaning applications.

Overall, the Electrolux CH 700 stands out for its powerful suction, user-friendly design, and efficient cleaning capabilities, making it an excellent choice for those looking to maintain a clean and healthy living space.