Duracell 75 manual Table of Contents

TABLE OF CONTENTS

		SECTION I DESIGN
For The System Design Engineer				Page
1.	General Description			1
2.	System Design and Layout			1
3.	Outdoor Installations			2
		SECTION II INSTALLATION
For The Installing Contractor
1.	Unpack and Inspect			2
2.	Position Air Cleaner Cabinet			2
3.	Connect Adjoining Ductwork			2
4.	Connect Drain			3
5. Mount Controller/PWM Power Supply				3
6.	Complete Wiring
A. High Voltage Wiring				3
B. Primary Wiring				3
C. Grounding				3
7.	Checkout for System Start-up			3
		SECTION III OPERATION AND SERVICE
For The Maintenance Engineer
1.	Introduction and Principle of Operation			4
2.	General Description			4
3.	Initial Start-up			4
4.	Routine Maintenance			5
5.	Periodic Maintenance	................................................................................................................		5
6.	Trouble Shooting			6
7.	Spare Parts			7
8.	Troubleshooting Reference Chart			8
9.	Page 9 through 11		NOT USED
		SECTION IV REFERENCE
Illustrations and Drawings
Figure 1		General Component Arrangement		12
Figure 2		High Voltage Lead Terminal Connections		13
Figure 3		Typical Outdoor Installation		14
Figure 4		Model 75 Junction Box…		15
Figure 5		Unit Outline		16
Figure 6		ATS Control Outline (STANDARD)		I7
Figure 7		ATS PWM Remote Box (OPTIONAL)		18
Figure 8		AIR BOSS CONTROL (OPTIONAL)		19
Figure 9		Not Used		20
Figure 10		Not Used		21
Figure 11		ATS Control (Standard)– Schematic		22
Figure 12		ATS Control (Standard)– Field Wiring/ Sequence of Operations		..... 23
Figure 13		ATS Remote (optional)– Schematic		24
Figure 14		ATS Remote (optional)– Field Wiring		25
Figure 15		Air Boss Control (optional) – Schematic		26
Figure 16		Air Boss Control (optional) – Schematic/Field Wiring		27
Figure 17		Air Boss Control (optional)– Sequence of Operations		28