Denso OFFICE PRO 36 operation manual Operating Modes, Emptying the Drain Tank If equipped

Page 10

Operating Modes

Offi ce Pro 36 operates in 2 modes, FAN Only and COOL. When in FAN Only mode, the unit circulates the surrounding air. When in COOL mode, the compressor is operational and cool air is circulated.

•COOL Mode

Offi ce Pro 36 will operate in FAN Only mode for approximately 120 seconds before the compressor engages. (Time delay setting is 120 ±15 seconds.)

•Temperature Control

The room temperature thermistor allows the unit to switch automatically between COOL and FAN Only modes. This is dependent upon inlet air temperature versus SET POINT temperature.

•Fan Mode Control DIP Switch

The Fan Mode Control DIP Switch determines whether the FAN will continue to oper- ate or stop when the compressor cycles off. (SET POINT temperature equals inlet air or room temperature.) The unit has been preset at the factory for continuous fan operation.

•Temperature Scale Display DIP Switch

The Temperature Scale Display DIP Switch changes the temperature(s) that are displayed to either °C or °F. The unit has been preset from the factory to display the temperature(s) in °F.

NOTE: If you wish to change the fan mode operation (COOL [OPERATE to

COOL [STOP), and/or the Temperature Scale Display (°F to °C), contact your Movin-

Cool reseller.

Emptying the Drain Tank (If equipped)

During COOL mode, condensate will accumulate in the drain tank. When the drain tank becomes full, the FULL TANK LED will fl ash and the unit will shut off automatically.

NOTE: If you want to empty the drain tank, while the unit is in operation, press the COOL ON/OFF button to turn the unit off. If a pro-

gram is running, you must first press the Program RUN button.

➀ Open the front panel.

➁ Pull the drain tank from the unit.

➂Remove the cap and empty the drain tank.

➃ Replace the cap and return the drain tank to the unit.

➄ Close the drain tank lid.

➅If the Program RUN LED is fl ashing, press the

COOL ON/OFF button to continue running the program. If the Program RUN LED is illuminated continuously, no further steps are necessary. If no program exists or the program was deacti- vated, press the COOL ON/OFF button to restart the unit.

7

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Office PRO UL US ListedDenso Sales CALIFORNIA, INC Table of Contents General Warnings & Cautions ForewordDefinition of Terms Choosing an Installation Site InstallationInventory Moving the Unit Plugging in the UnitOperation FeaturesOP36 Features Control PanelOperating in Fan Only Mode Operating in Cool ModeChanging from Fan Only Mode to Cool Mode ➂ Setting the Clock Time How to Set a Program ➀ Setting a Start Time➁ Setting an END Time ➃ Programming the Temperature SET PointOperating Modes Emptying the Drain Tank If equippedDrain Pump Optional Daily Inspection & MaintenanceCleaning the Air Filters Emptying the Drain TankIn-Season/Off-Season Inspection & Maintenance TroubleshootingCleaning Method Office Pro 36 Self-Diagnostic CodesSymptom Possible Cause Remedy Afci Power Cord ManualTechnical Specifications Limited Warranty Via Oro Avenue First Issue March Dsca P/N LA484007-1810

OFFICE PRO 36 specifications

Denso OFFICE PRO 36 is a cutting-edge multifunction printer designed to meet the diverse needs of modern offices. This device brilliantly combines efficiency, versatility, and user-friendly features to streamline workflow and improve productivity.

One of the standout characteristics of the Denso OFFICE PRO 36 is its high-speed printing capability. The printer can produce up to 36 pages per minute, ensuring that even the busiest offices can keep up with the demands of their workload. With a rapid first printout time, users can quickly obtain their documents without unnecessary delays.

The OFFICE PRO 36 is equipped with advanced scanning capabilities, allowing users to convert paper documents into digital files with ease. It features a robust flatbed scanner alongside an automatic document feeder, enabling users to scan both single and double-sided documents quickly. The scanner offers high-resolution output, ensuring that images and text are reproduced faithfully.

In addition to its impressive printing and scanning features, the Denso OFFICE PRO 36 supports a variety of paper sizes and media types, making it a versatile choice for businesses with varied printing needs. Whether printing presentations, reports, or marketing materials, users can easily switch between different types of paper without hassle.

Regarding connectivity, the OFFICE PRO 36 includes wireless capabilities, allowing seamless integration with office networks. It supports mobile printing through several platforms, including Apple AirPrint, Google Cloud Print, and various Android applications. This feature enables users to print documents directly from their smartphones or tablets, increasing convenience for those on the go.

Security is a significant consideration in today’s office technology, and the Denso OFFICE PRO 36 does not disappoint. It includes robust security features, such as user authentication, secure printing options, and data encryption, ensuring that sensitive information remains protected.

Furthermore, the printer is designed for energy efficiency, complying with international standards to minimize its environmental impact. This focus on sustainability does not compromise performance; instead, it provides users with a high-quality printing experience while contributing to a greener planet.

In conclusion, the Denso OFFICE PRO 36 is a multifunction printer that excels in speed, versatility, and security. Its blend of advanced technologies and user-centric features makes it an ideal choice for any modern office looking to enhance its productivity and operational efficiency.
Top Page Image Contents