Care and Maintenance, End-of-Season Care

Care and Maintenance

When cleaning the air conditioner, be sure to turn the POWER OFF and disconnect the power cord from the electrical outlet.

1.DO NOT use gasoline, benzine, thinner or other chemicals on the air conditioner as these substances may cause damage to the paint finish and deformation of plastic parts.

2.Never attempt to pour water directly on unit as this will cause deterioration of the electrical insulation.

Air Filter Removal:

The air filter is located behind the air intake front grill. To remove the air filter, grasp the sides of the front grill and pull forward to open and access the filter.

To reinstall the air filter, reverse the above procedures. The air filter may be vacuumed or washed by-hand in warm water. Dry thoroughly before installing.

Cleaning Air Filter

1.Use a vacuum cleaner with soft brush attachment.

2.Wash the filter in lukewarm water below 40°C (104°F): To get better results, wash with soapy water or a neutral cleaning agent.

3.Rinse the filter with clean water and dry thoroughly before re-installing.

End-of-Season Care

1.Operate the fan alone for half a day to dry out the inside of the unit.

2.Turn off power and remove plug from wall socket.

3.Clean filter.

4.Store (covered) air conditioner in a dry location.

CAUTION

When installing and/or removing the air conditionner from the window, ensure that caution is taken to prevent the unit from falling backward. It is recommended that installtion or removal of the airconditioner is done with assitance to prevent injury to persons or damage to the unit or property.

Spécifications électriques

1.Tous les câblages doivent être conformes aux codes électriques locaux et nationaux et doivent être installés par un électricien qualifié. Si vous avez la moindre question au sujet des instructions ci-dessous, contactez un électricien qualifié.

2.Vérifiez la fourniture d'alimentation électrique disponible et résolvez tout problème de câblage AVANT d'installer et de faire fonctionner cet appareil.

3.Ce climatiseur à 115 V utilise 8,4 ampères ou moins de puissance nominale et peut être utilisé dans toute prise de courant domestique de but général, adéquatement câblée. Voir le Tableau 1 pour les spécifications pour circuit de dérivation individuel.

4.Pour votre sécurité et votre protection, cet appareil est mis à la masse par la fiche du cordon d'alimentation lorsqu'elle est branchée dans une prise murale qui lui correspond. Si vous n'êtes pas certain que votre prise de courant murale est mise à la masse adéquatement, veuillez consulter un électricien qualifié.

5.La prise murale (pour 3 broches) doit correspondre à la fiche à 3 broches sur le cordon de service fourni avec l'appareil. N'utilisez PAS de fiches d'adaptation. Voir Tableau 2 pour les renseignements sur les prises de courant et les fusibles. S'il est nécessaire d'utiliser une rallonge électrique pour brancher votre climatiseur, utilisez une rallonge électrique approuvée pour « climatiseur », exclusivement (disponible dans la plupart des magasins locaux de quincaillerie).

6.La plaque signalétique sur l'appareil contient des données électriques et techniques; elle se trouve sur le côté droit de l'appareil, au-dessus du cordon d'alimentation.

Tableau 1 : Circuit de dérivation individuel suggéré

Puissance nominale : ampères	Calibre AWG*
7,3 à 8,4	14

AWG American Wire Gage

*Basé sur un fil de cuivre à une valeur limite de température de 60o C.

Tableau 2 : Types de prises de courant et de fusibles

Voltage nominal	125
Amps	15

Prise de courant murale
Prise de courant murale

Dimensions du fusible	15
Fusible à retardement	Type de fiche
(ou disjoncteur)

IMPORTANT

DO NOT forget to install the air filter. If the air conditioner is left to operate without the air filter, dust is not removed from the room air and may result in machine failure.

When the air inlet grill and cabinet are dirty, wipe with lukewarm water (below 40°C). Use of a mild detergent is recommended.

DAC9006DE, DAC10560DE specifications

The Danby DAC9006DE and DAC10560DE are two standout models in the realm of portable air conditioning units, designed to deliver efficient cooling solutions for various living spaces. These models showcase a blend of advanced technology, user-friendly features, and energy efficiency, making them ideal choices for residential and office environments.

The Danby DAC9006DE boasts a cooling capacity of 9,000 BTU, efficiently designed to cool areas up to 400 square feet. This makes it a great option for bedrooms, small living rooms, or home offices. It utilizes a powerful rotary compressor that ensures quick cooling and consistent temperature maintenance. Additionally, the unit operates quietly at a noise level of around 52 dBA, allowing users to sleep or work without disruption.

On the other hand, the DAC10560DE offers a more robust cooling capacity of 10,500 BTU, making it suitable for spaces up to 450 square feet. This model is perfect for slightly larger rooms, ensuring a comfortable environment during the warm summer months. Like its smaller counterpart, the DAC10560DE employs a rotary compressor that enhances its energy efficiency and performance.

Both models feature a programmable thermostat, allowing users to set their desired temperature. The intuitive electronic controls make it easy to adjust settings, and the included remote control adds convenience by allowing users to change the settings from anywhere in the room. Additionally, the air conditioners come equipped with a 24-hour programmable timer, giving users the flexibility to pre-set cooling schedules that align with their daily routines.

Another significant feature of the Danby DAC9006DE and DAC10560DE is the integrated dehumidifier function. This feature helps remove excess moisture from the air, improving indoor air quality and comfort levels, especially in humid climates. Both models are also equipped with washable air filters, which are easy to maintain and help ensure optimal airflow while capturing dust and allergens.

In terms of installation, both units come with a convenient window installation kit, allowing for easy setup without requiring professional assistance. Their sleek and modern design ensures they blend seamlessly with home decor while providing effective cooling solutions. Overall, the Danby DAC9006DE and DAC10560DE represent excellent options for individuals seeking reliable and efficient air conditioning units to combat heat and humidity.